Panasonic LCDPT-VW435NEA user manual

User manual for the device Panasonic LCDPT-VW435NEA

Device: Panasonic LCDPT-VW435NEA
Category: Projector
Manufacturer: Panasonic
Size: 22.02 MB
Added : 4/26/2014
Number of pages: 133
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Panasonic LCDPT-VW435NEA. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic LCDPT-VW435NEA.

For your convenience

If looking through the Panasonic LCDPT-VW435NEA user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Panasonic LCDPT-VW435NEA on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Panasonic LCDPT-VW435NEA to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Panasonic LCDPT-VW435NEA User manual - Online PDF
Advertisement
« Page 1 of 133 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic LCDPT-VW435NEA but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Panasonic LCDPT-VW435NEA. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

ORDER NO. VED1207438CE
D10
LCD Projector
Model No. PT-VX505NU
PT-VX505NE
PT-VX505NEA
PT-VW435NU
PT-VW435NE
PT-VW435NEA
© Panasonic Corporation 2012. Unauthorized
copying and distribution is a violation of law.

Summary of the content on the page No. 2

Contents Contents ....................................................................... 2 Serial Control ............................................................. 76 Safety Instructions ...................................................... 3 Serial terminal ........................................................... 76 Safety precautions ...................................................... 4 Control Port Functions ............................................. 79 Specifications .........

Summary of the content on the page No. 3

Safety Instructions The service technician is required to read and follow the “Safety Precautions” and “Important Safety Notice” in this service manual. WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It dose not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by

Summary of the content on the page No. 4

Safety Instructions Safety precautions 1. Safety Precautions 1.1. General Guidelines - For continued safety, no modification of any circuit must be attempted. - Unplug the power cord from the power outlet before disassembling this projector. - Use correctly the supplied power cord and must ground it. - It is advisable to use an isolation transformer in the AC power line before the service. - Be careful not to touch the rotation pa

Summary of the content on the page No. 5

Specifications Model No. PT-VW435NU / E / EA PT-VX505NU / E / EA Power supply AC100 V - 240 V 50 Hz/60 Hz 100 V - 240 V 4.0 A-1.6 A 365 W When [Standby mode] of [Setting] is set to [ECO]: 0.3 W Power consumption When [Standby mode] of [Setting] is set to [Network]: 12.9 W or less When [Standby MIC out] of [Sound] is set to [On]: Max.26 W 1.5 cm(0.59") 1.6 cm(0.63") Panel size (aspect ratio 16 : 10) (aspect ratio 4 : 3) Display method 3 transparent LCD panels (RGB) LCD panel Drive method Active m

Summary of the content on the page No. 6

Specifications Model No. PT-VW435NU / E / EA PT-VX505NU / E / EA 1 (D-sub 15 pin female) [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 [p-p] 75 Ω HD/SYNC TTL high impedance, automatic positive/negative po- COMPUTER IN larity compatible 1 /COMPONENT VD TTL high impedance, automatic positive/negative polarity IN compatible [YPBPR signal] Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 [p-p] 75 Ω HD/SYNC TTL

Summary of the content on the page No. 7

Circuit Protections This projector provides the following circuit protections to operate in safety. If the abnormality occurs inside the pro- jector, it will automatically turn off by operating one of the following protection circuits. Thermal fuse (SW902) There is a thermal fuse (SW902) inside of the projector to detect the internal temperature rising abnormally. When the internal tempera- ture around lamp reaches near 113˚C, the thermal fuse will open to cut off the power supply to the lamp

Summary of the content on the page No. 8

Circuit Protections Warning temperature and power failure protection The projector will be automatically turned off when the internal temperature of the projector is abnormally high, or the cooling fans stop spinning, or the power supplies in the projector are failed. LED indicator ON(G) / STANDBY(R) indicator WARNING indicator The projector is shut down and the WARNING indicator is blinking red. When the temperature inside the projector reaches a certain level, the projector will be automatic

Summary of the content on the page No. 9

Maintenance Before replacing the unit When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect the power plug from the wall outlet. Maintenance n Outer Case Wipe off dirt and dust using a soft dry cloth. • If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with a dry cloth. • Do not use benzene, thinner, or rubbing alcohol, other solvents, household cleaners, or chemical treated

Summary of the content on the page No. 10

Maintenance n Replacement of the air filter unit (back) 1) Remove the air filter cover. • Open the air filter cover in the direction of the arrow in the figure and remove it. 2) Remove the air filter unit. • Hold the knob of the air filter unit and pull out in the direction of the arrow. • After removing the air filter unit, remove large Air filter cover (back) foreign objects and dust from the air filter compartment and the projector’s air intake port if there are any. 3) Insert the ne

Summary of the content on the page No. 11

Maintenance n Lamp unit The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the Information menu. It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer. Consult your dealer to purchase a replacement lamp unit. Replacement lamp unit: ET-LAV200 CAUTION: n Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.) The inside of the cover can become very hot, take care to avoid burn injuries.

Summary of the content on the page No. 12

Maintenance Replacing the lamp unit CAUTION: • When the projector is mounted on a ceiling, do not work with your face close to the projector. • Attach the lamp unit and the lamp cover securely . Lamp cover • When you experience difficulty in installing the lamp, remove it and try again. If you use force to install the lamp, the connector may be damaged. 1) Turn off the projector. Unplug the AC power cord. Wait at least 1 hour and make sure the lamp unit and surroundings are cool. 2) Use

Summary of the content on the page No. 13

Maintenance How to check lamp runtime The LAMP indicator will light yellow when the total lamp used time (Corresponding value) reaches 2,500 hours. This is to indicate that lamp replacement is required. The total lamp used time is calculated by using the below expres- sion. Total lamp used time (Corresponding value) = Tnormal + Teco x 0.625 Tnormal : used time in the normal mode Teco : used time in the eco mode You can check the lamp used time following to the below procedure. 1 Press an

Summary of the content on the page No. 14

Maintenance Cleaning After long periods of use, dust and other particles will accumulate on the LCD panel, prism, mirror, polarized glass, lens, etc., causing the picture to darken or color to blur. If this occurs, clean the inside of optical unit. Remove dust and other particles using air spray. If dirt cannot be removed by air spray, disassemble and clean the optical unit. Cleaning with air spray Remove the cabinet top following to “Mechanical Disassembly”. Clean up the LCD panel and polariz

Summary of the content on the page No. 15

Security Function Notice This projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock". When the projector has set these security function on, you are required to enter correct PIN code to use the projector. If you do not know the correct PIN code to the projector, the projector can no longer be operated or started. In this case, you must reset those function first according to the resetting procedure described below and then check up on the project

Summary of the content on the page No. 16

Standby Mode Notice This projector provides 2 types of standby mode, Eco standby and Network standby. According to the standby mode "Eco" or "Network", several functions are restricted as shown in the table below. To change the standby mode, use the projector's menu "Setting". Network .......... Supply the power to the network function even after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector statu

Summary of the content on the page No. 17

Mechanical Disassembly Mechanical disassembling flow chart Screws expression (Type Diameter x Length) mm Mechanical disassembly should be made following procedures in numerical T type M Type order. Following steps show the basic procedures, therefore unnecessary step may be ignored. Caution: The parts and screws should be placed exactly the same position as the origi- nal otherwise it may cause loss of performance and product safety. 1. Air filter units removal 2. Cabinet top remova

Summary of the content on the page No. 18

Mechanical Disassembly 1. Air filter units removal 1.Pull out the filter covers (back and side) . 2. Take out the whole air filter units (back and side). Filter cover(side) Air filter unit(back) Filter cover(back) Air filter unit(side) Fig.1 -18-

Summary of the content on the page No. 19

Mechanical Disassembly 2. Cabinet top removal 1. Loosen 1 screw-A to remove the lamp cover. 2. Remove 8 screws-B (M3x8) and 3 screw C-(T3x10) to remove the cabinet top. 3. T ake out the DEC DIAL. A Lamp cover C Cabinet top R/C window DEC DIAL Dec inlay LED B Control buttons B B B B B B B C C Fig.2 -19-

Summary of the content on the page No. 20

Mechanical Disassembly 3. MAIN&AV board assy removal 1. Remove 2 screws-A (M3x6) and 5 screws-B (T3x8) to remove the MAIN board shield. 2. Remove 1 screw-C (T3x8) to remove holder DIAL then remove R/C board. 3. Remove 3 screws-D (T3x8) and 2 screws-E (M3x8) to remove the MAIN & AV board assy, then take out the USB wireless LAN. B B B B A MAIN board shield B A C MAIN & AV board assy Holder DIAL D D D USB Wireless LAN R/C board E E Fig.3 -20-


Alternative user manuals
# User manual Category Download
1 Panasonic Ceiling Mount Bracket ET-PKB80 User manual Projector 6
2 Panasonic Ceiling Mount Bracket ET-PKE1000S User manual Projector 9
3 Panasonic PT-LB60NTU User manual Projector 10
4 Panasonic PT-LB20VU User manual Projector 10
5 Panasonic PT-LC55E User manual Projector 59
6 Panasonic PT-LW25H User manual Projector 34
7 Panasonic PT-ST10EA User manual Projector 0
8 Panasonic PT-VW330U User manual Projector 10
9 Panasonic Presentation Solutions User manual Projector 3
10 Panasonic PT-47WX51 User manual Projector 0
11 Panasonic PT-LC75U User manual Projector 3
12 Panasonic PT-VX400U User manual Projector 4
13 Panasonic PT-LZ370U User manual Projector 2
14 Panasonic PT-47WX49 User manual Projector 1
15 Panasonic PT VX400NTU User manual Projector 5
16 Edelbrock 17930 User manual Projector 0
17 Sony BRIGHTERA VPL-FH30 User manual Projector 40
18 Sony 53S75 User manual Projector 4
19 Sony CX125 User manual Projector 12
20 Sony Cineza VPL-HS3 User manual Projector 63