Summary of the content on the page No. 1
R
LCD Projector Commercial Use
Operating Instructions
Model No. PT-L735NTU
PT-L735U
POWER AUTO SETUP
RGB LASER
VIDEO MENU
PAGE
R-CLICK ENTER
FREEZE SHUTTER
FUNC1 STD
Computer Projector
Before operating this product, please read the instructions carefully and save this
manual for future use.
TQBJ 0125-1
ENGLISH
Summary of the content on the page No. 2
Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-L735NTU / PT-L735U Serial number: IMPORTANT SAFETY NOTI
Summary of the content on the page No. 3
CAUTION: This equipment is equipped with a three- pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will only fit a grounding- Do not remove type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T
Summary of the content on the page No. 4
Contents Adjusting the position...............40 Preparation POSITION, DOT CLOCK, CLOCK IMPORTANT SAFETY NOTICE ...2 PHASE, KEYSTONE, OSD POSION, Precautions with regard to ASPECT, RESIZING, AUTO SETUP, FRAME LOCK safety .........................................5 Audio adjustment ......................44 Accessories .................................9 VOLUME, MUTE, AUDIO MODE Before use ..................................10 Changing the display language...44 Location and function of each Option se
Summary of the content on the page No. 5
Precautions with regard to safety WARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet. BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result. BCheck that no more smoke is coming out, and then contact an Authorized Service Center for repairs. BDo not attempt to repair the projector yourself, as this can be d
Summary of the content on the page No. 6
Do not do anything that might damage the power cord or the power cord plug. BDo not damage the power cord, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle. BIf the power cord is used while damaged, electric shocks, short-circuits or fire may result. BAsk an Authorized Service Center to carry out any repairs to the power cord that might be necessary. Do not handle the power cord plug wit
Summary of the content on the page No. 7
Do not look into the lens while the projector is being used. BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. BBe especially careful not to let young children look into the lens. In addition, turn off the power when you are away from the projector. Keep the remote control unit out of the reach of children, and do not look into the laser beam or point it towards other people. BIf the laser beam which is emitted by the remo
Summary of the content on the page No. 8
When inserting the batteries, make sure the polarities (+ and -) are correct. BIf the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Use only the specified batteries. BIf incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Do not mix old and new batteries. BIf the batteries are inserted incor
Summary of the content on the page No. 9
Accessories Check that all of the accessories shown below have been included with your projector. Remote control unit AAA batteries for RGB signal cable (N2QAEA000015 x1) remote control unit (x2) [3.0 m (9´10˝), K1HB15FA0001 x1] POWER AUTO SETUP RGB LASER VIDEO MENU PAGE Video/Audio cable Power cord [3.0 m (9´10˝), (K2CG3FZ00008 x 1) R-CLICK ENTER K2KA2FA00002 x 1] FREEZE SHUTTER FUNC1 STD Computer Projector Carrying bag USB cable (TPEP010 x1) (K1HB04FD0002 x 1) PT-L735NTU only CD-ROM SD memo
Summary of the content on the page No. 10
Before use Cautions when moving the projector Be sure to attach the lens cover before moving the projector. The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory carrying bag. When placing the projector inside the carrying bag, position it so that the lens is facing upward. Cautions regarding setting-up Avoid setting up in places which are subject to vibration or shocks. The internal parts can be damaged, which may cause malfunctions o
Summary of the content on the page No. 11
Notes on use In order to get the best picture quality Draw curtains or blinds over any windows and turn off any fluorescent lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Do not touch the surfaces of the lens with your bare hands. If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen. Moreover, when not using the projector, retract the lens and then cover it with
Summary of the content on the page No. 12
Location and function of each part Projector PT-L735NTU only # $ % & ' 1 2 3 4 ( 0 * - , / . -,+ * ) #Focus ring -Leg adjuster buttons(L/R) (page 24) (page 24) These buttons are used to unlock the $Zoom ring front adjustable legs. Press to adjust (page 24) the angle of tilt of the projector. %Projector control panel .Remote control signal receptor (page 14) (page 22) &Connector panel /Lens cover (page 16) 0Projection lens 'MAIN POWER switch (pages 23 and 25) 1Wireless card
Summary of the content on the page No. 13
Projector $ % & # ' ( #Security lock &Carrying handle This can be used to connect a 'Speaker (R) commercially-available theft- (Lamp unit holder prevention cable (manufactured (page 56) by Kensington). This security lock is compatible with the Microsaver WARNING Security System from Do not bring your hands or other Kensington. Contact details for objects close to the air outlet port. this company are given below. BHeated air comes out of the air outlet port. Do not bring your
Summary of the content on the page No. 14
Remote control unit 2 ) POWER AUTO SETUP ' RGB LASER 3 VIDEO MENU ( PAGE 1 + . / 0 , Projector control panel R-CLICK ENTER - &'() FREEZE SHUTTER 4 * 5 # FUNC1 STD 6 8 $ Computer Projector 7 % 9 * + , - the MAIN POWER switch is turned #RGB INPUT indicator (page 26) on (standby mode), and illuminates green when the power is turned on This indicator shows whether a signal is being input to the RGB and a picture starts to be projected. input connectors (RGB 1 IN/RGB When the WEB STANDBY is set to 2
Summary of the content on the page No. 15
the signal being input. In addition, 2Operation indicator the angle of tilt of the projector will (page 30) be automatically detected and This indicator illuminates while a adjusted in order to correct any laser beam is being emitted keystone distortion. (while the LASER button is being *SHUTTER button pressed). It flashes when any other buttons are being pressed. (page 28) This button is used to 3LASER button momentarily turn off the picture (page 30) and sound. A beam of laser light is emitted
Summary of the content on the page No. 16
Connector panel * + # $ % & ' ( ) is connected to this jack, no #USB port sound will be output from the (page 31) built-in speaker. The remote control unit can be used as a personal computer (RGB AUDIO IN jack mouse by connecting the (pages 20 and 21) projector to a personal computer Only one system is provided, so with the supplied USB cable. connect the appropriate (4-pin square connector) connector when using RGB1 or $SERIAL connector RGB2. (pages 20, 21 and 64) )S-VIDEO IN connector This co
Summary of the content on the page No. 17
(PT-L735NTU only) Wireless card SD memory card Front Back # & $ ' % #Connector &Metal terminals This connector is for connecting These terminals are for the wireless card to the connecting the SD memory card projector’s card slot. Be careful to the projector’s card slot. Do not not to touch the connector. touch the metal terminals with hands or metal objects, attach $Wireless card power indicator stickers to them, or allow them to Illuminates when the wireless become contaminated in any way. car
Summary of the content on the page No. 18
Setting-up Projection methods In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the OPTION menu. Refer to page 46 for details.) BFront-desk projection BFront-ceiling projection Menu items Setting Menu items Setting FRONT/REAR FRONT FRONT/REAR FRONT DESK/CEILING DESK DESK/CEILING CEILING BRear-desk projection BRear-ceiling projection (Using a translucen
Summary of the content on the page No. 19
Projector position Top edge of screen L: Projection distance SH: Image height Screen L SW:Image width H1: Distance from center Bottom edge of screen of lens to bottom edge of projected image L Screen Projection distances Screen size (4:3) Projection distance (L) Height position Diagonal Height Width Wide Telephoto (H1) length (SH) (SW) (LW) (LT) 1.01 m(40˝) 0.61 m(2´) 0.81 m(2´8˝) 1.2 m(3´11˝) 1.5 m(4´11˝) 0.06 m(2-13/32˝) 1.27 m(50˝) 0.76 m(2´6˝) 1.02 m(3´4˝) 1.6 m(5´2˝) 1.9
Summary of the content on the page No. 20
Connections Notes on connections B Read the instruction manual for each system component carefully before connecting it. B Turn off the power supply for all components before making any connections. B If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned. B If there is a lot of jitter in the video signal which is input from the video source, the picture on the
