Summary of the content on the page No. 1
Digital Presenter
User Manual
SDP-760
Summary of the content on the page No. 2
Digital Presenter User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or
Summary of the content on the page No. 3
● overview overview impor TAnT SAfeTy inSTruCTionS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the saf
Summary of the content on the page No. 4
overview w ArninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAuTion CAuTion riSK of eLeCTriC SHoCK. Do noT open : TO REDUCE THE RISK OF ELECTRIC SHOCK. CAUTION DO NOT REMOVE COVER (OR BACK). NO
Summary of the content on the page No. 5
● overview This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Summary of the content on the page No. 6
overview ConTenTS 3 Important Safety Instructions oveR view 7 Product Features 8 What's Included 9 Product at a Glance 3 9 Front View 10 Rear View 11 Control Panel insT alla Tion & ConneCTion 12 Preparations 13 Connecting the Output device 13 Connecting to the monitor 13 Connecting the TV 12 14 Connecting to the PC 15 Kensington Lock 16 Getting Started seTuP & aPPliCa Tion 16 Setup 16 Image Adjustment 20 Setting the Output Resolution 16 21 Setting Supplemental Functions aPPenDix 25 Specificati
Summary of the content on the page No. 7
● overview proDuCT feATureS Thanks for purchasing the product. This product is high quality video presenter which enables simple and easy video display from all sources onto a computer monitor and video projector devices. • 3m pixel CmoS imaging Device By adopting 1/2.8” 3M pixel CMOS, it implements high-resolution and color reproduction. • Supports XGA to 1080p (30 frame/sec) video output Supports VGA output of 1080p resolution in XGA and C-VIDEO output, any type of video projectors can be
Summary of the content on the page No. 8
SAM SDP-76 SUNG 0 DIGITAL PRESENTER overview wHAT'S inCLuDeD Check if the main unit and all the following accessories are included in the product package. Main Unit Software / User Manual CD Power Adapter VGA Cable USB Cable Diffusing Sheet Accessories RS-232C Cable Microscope adapter ` RS-232C cables and adapter lenses from other brands may not be compatible with this product. J Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide cu
Summary of the content on the page No. 9
SDP-760 SAMSUNG DIGITAL PRESENTER ● overview proDuCT AT A GLAnCe front v iew Main Pole Lens LED Lighting Control Panel Rear Panel English _9 SA SD MP SUN -760 G DIGITAL PRESENTER
Summary of the content on the page No. 10
overview rear v iew RS-232C USB C-VIDEO VGA OUT DC 5V IN a b c d e f Item Description Insert the Kensington security cable. For preventing a product theft or the security Kensington Lock a purpose, use the Kensington security cable to tie up this product with a fixed object. DC 5V IN Connect the power jack of the DC adapter to this port. b RS-232C Connect the RS-232C cable to this port. c USB Connect this port to a computer that supports USB communications. d C-VIDEO Connect C-VIDEO to the TV f
Summary of the content on the page No. 11
SAM SDP SUN -760 G DIGITAL PRESENTER ● overview Control panel Description Item LIVE Menu setup mode Power On/Off When powered, the LED turns to blue. Adjust the screen brightness Move up or down Zoom In/Out Move left or right Open the menu Run the selected menu Lighting On/Off Press and hold the button to run MASK function. Auto Color Adjustment Auto Focus Press and hold the button to run manual focusing. Freeze Press and hold the button to rotate the played video by 180°. Cancel your w
Summary of the content on the page No. 12
SDP-760 SAMSUNG DIGITAL PRESENTER SDP-760 SAMSUNG DIGITAL PRESENTER installation & connection prep ArATionS 1. Connect the necessary cables of VGA OUT, C-VIDEO, USB and Power. VGA OUT USB RS-232C USB C-VIDEO VGA OUT DC 5V IN C-VIDEO 2. Press of the presenter to turn on the digital presenter. 12_ installation & connection SA SD MP SUN -760 G DIGITAL PRESENTER
Summary of the content on the page No. 13
● inSTALLATion & ConneCTion ConneCTinG THe ouTpuT DeviCe Connecting to the monitor To display video on a monitor, the monitor should be connected to the presenter with monitor cable. Monitor Cable VGA OUT RS-232C USB C-VIDEO VGA OUT DC 5V IN Digital Presenter Monitor, projector, etc Connecting the Tv To display video on a TV, the TV should be connected to the presenter with C-VIDEO cable. Video Cable C-VIDEO RS-232C USB C-VIDEO VGA OUT DC 5V IN Digital Presenter TV English _13
Summary of the content on the page No. 14
installation & connection Connecting to the pC To connect the presenter and PC, use USB or RS-232C cable. Using USB cable enables control as well as video transfer, while RS-232C only enables control as defined in the protocol. Connecting a pC with uSB Cable 1. Connect the cable to the USB port of the PC. 2. Connect the USB cable’s the other end to the presenter’s [USB] port. USB Cable USB RS-232C USB C-VIDEO VGA OUT DC 5V IN Digital Presenter PC ` It is recommended to connect the USB cable to
Summary of the content on the page No. 15
● inSTALLATion & ConneCTion Connecting a pC with rS-232C Cable 1. Connect the cable to the RS-232C port of the PC. 2. Connect the RS-232C cable’s the other end to the presenter’s [RS-232C] port. RS-232C Cable (Purchased separately) RS-232C RS-232C USB C-VIDEO VGA OUT DC 5V IN Digital Presenter PC ` The RS-232C cable is optional that is not included in the product package. Purchase it if needed. J However, a third-party RS-232C cable (manufactured by other than Samsung Techwin) may not guarant
Summary of the content on the page No. 16
setup & application GeTTinG STAr TeD 1. Press the button. The power LED turns to blue. 2. Press the button. 3. The main menu appears. preSenTer mAin menu IMAGE ADJUSTMENT } OUTPUT MODE } } CONFIGURATION SAVE AND EXIT } SeTup image Adjustment Setting the white Balance (wB moDe) You can adjust the color tones of the image automatically in Live mode. 1. From the menu, select imAGe ADJuSTmenT wB moDe. preSenTer imAGe ADJuSTmenT WB MODE ATW (Auto Tracking) IMG MODE IMAGE DNR ON AN
Summary of the content on the page No. 17
● SeTup & AppLiCATion • Auto color adjustment 2: AWB(KEY) You can adjust the color tones of the displayed video automatically each time you press . - Select AWB(KEY) from the menu and press button in LIVE screen to adjust color automatically. • Manual color adjustment: MANUAL WB You can adjust the settings of reD GAin and BLue GAin manually before performing the white balance. - Select mAnuAL wB. - Use the [◄►] button to change the settings to your preference. - When done, return to the Li
Summary of the content on the page No. 18
setup & application • COLOR : Select a GAIN setting. Each time you press [►], the gain of color will switch to . • SHARPNESS : Set the sharpness of the displayed image. Each time you press [►], the sharpness level will switch to . ` If you increase the sharpness level, the image may be displayed abnormally or it can cause a noise. J Setting the noise reduction (Dnr) DNR stands for Digital Noise Reduction that provides a clear image through 2D/3
Summary of the content on the page No. 19
● SeTup & AppLiCATion Setting the mask You can mask a portion or the whole of the screen so that it is hidden. 1. From the menu, select imAGe ADJuSTmenT mASK SeTup. mASK SeTup menu BOUNDS VGA/USB TONE LEVEL 4 WIDTH ··· ··· ··· ··· 25 * HEIGHT ··· ··· ··· ··· 25 * RETURN } 2. Select mASK SeTup to display the sub menu items. • BOUNDS : With BOUNDS, select the display device currently using. Press [►] button to select BOUNDS mode in the order of . • TONE : Select a ton
Summary of the content on the page No. 20
setup & application Setting the output resolution You can set a different resolution according to the output device (monitor, projector). 1. Select ouTpuT moDe from the menu. preSenTer ouTpuT moDe 1080P 1920X1080 30fps } 720P 1280X720 30fps } UXGA 1600X1200 20fps } } SXGA 1280X1024 30fps WXGA 1280X800 30fps } XGA 1024X768 30fps } USB USB OUT MODE } RETURN } CURRENT: 1080P MODE } 2. Move the cursor (►) to a desired resolution and set the output resolution of the digital
