Pelco DX7100 Series Recovery Instructions user manual

Device: Pelco DX7100 Series Recovery Instructions

Category: Camcorder

Manufacturer: Pelco

Size: 0.59 MB

Added : 9/9/2013

Number of pages: 8

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Pelco DX7100 Series Recovery Instructions. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Pelco DX7100 Series Recovery Instructions.

For your convenience

If looking through the Pelco DX7100 Series Recovery Instructions user manual directly on this website is not convenient for you, there are two possible solutions:

Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Pelco DX7100 Series Recovery Instructions on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual Pelco DX7100 Series Recovery Instructions to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.

Pelco DX7100 Series Recovery Instructions User manual - Online PDF

« Page 1 of 8 »

Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Pelco DX7100 Series Recovery Instructions but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Pelco DX7100 Series Recovery Instructions. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents

Summary of the content on the page No. 1

DX7100 Series
Recovery
Instructions
C1671M (5/05)
Digital Video Recorder
DX7100

Summary of the content on the page No. 2

Summary of the content on the page No. 3

DX7100 Recovery Procedure The DX7100 recovery procedure describes how to recover your DX7100 software using the DX7100 Recovery CD. To recover DX7100 software using the DX7100 Recovery CD: 1. Insert the DX7100 Recovery CD into the CD-ROM drive of the DX7100 Series digital video recorder (DVR). 2. Turn off the power to the DVR. 3. Count to 10 and then turn the power back on. The boot screen appears. 4. Press the Delete key. The CMOS Setup Utility will open. C1671M (5/05) 3

Summary of the content on the page No. 4

5. Scroll down to Advanced BIOS Features, and then press the Enter key. 6. The Advanced BIOS Features dialog box opens. Scroll down to First Boot Device. 4 C1671M (5/05)

Summary of the content on the page No. 5

7. Press the Enter key. The First Boot Device dialog box opens. Scroll down to CDROM, and then press the Enter key to make the CD-ROM the ﬁrst boot device. 8. Repeat steps 6 and 7 for the second and third boot devices. Select SCSI for the second boot device, and select HDD-0 for the third boot device. 9. Press the F10 key to save the changes to the boot devices. 10. A message appears in the center of the screen asking if you want to “SAVE to CMOS and EXIT (Y/N)?” Type Y and then press

Summary of the content on the page No. 6

12. A message appears telling you to “Press any key to boot from CD.” Press the Enter key to start the reimaging tool. Wait a few minutes until the Pelco Recovery Tool dialog box opens. 13. If you want to proceed with the recovery process, type YES in the text box, and then click OK. 14. The Ghost 32, Version 8.0 window opens. The Progress Indicator bar near the top of the window shows the progress of the recovery operation. When the bar reaches 100 percent, the DX7100 recorder will reboo

Summary of the content on the page No. 7

16. In the CMOS Setup Utility, select Advanced BIOS Features. Press the Enter key. 17. In the First Boot Device dialog box, scroll to HDD-0 and then press the Enter key to make the hard drive the ﬁrst boot device. 18. Press the F10 key to save the change. 19. A message appears in the center the screen asking if you want to “SAVE to CMOS and EXIT (Y/N)?” Type Y and then press the Enter key. The DX7100 reboots. 20. The DX7100 recovery procedure is complete, and your recorder should be ready

Summary of the content on the page No. 8

Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East | | | | | | | |

Alternative user manuals

#	User manual	Category	Download
1	Pelco DX C623M-RU User manual	Camcorder	0
2	Pelco CC3700H-2 User manual	Camcorder	11
3	Pelco C1917M User manual	Camcorder	0
4	Pelco CC3700S-2X User manual	Camcorder	2
5	Pelco CC3700H-2X User manual	Camcorder	7
6	Dodge TXT/HXT 709 - 715 - 725 User manual	Camcorder	0
7	Sony 3-286-590-12(1) User manual	Camcorder	29
8	Sony 3CCD COLOR BRC-300P User manual	Camcorder	56
9	Sony 4-157-878-12(1) User manual	Camcorder	0
10	Sony 300PF User manual	Camcorder	8
11	Sony 300PK User manual	Camcorder	9
12	Sony 3-280-847-11(1) User manual	Camcorder	1
13	Sony 3CCD COLOR BRC-300 User manual	Camcorder	16
14	Sony 4-114-858-12(1) User manual	Camcorder	2
15	Sony 4-191-794-11(1) User manual	Camcorder	1