Black & Decker 90510288 user manual

Summary of the content on the page No. 1

UK
Ireland
Australia
New Zealand

Summary of the content on the page No. 2

2

Summary of the content on the page No. 3

hard hat, or hearing protection used for appropriate Intended use conditions will reduce personal injuries. Your Black & Decker Saw has been designed for sawing c. Avoid accidental starting. Ensure the switch is in the off wood, plastics and metal. position before plugging in. Carrying power tools with your This tool is intended for consumer use only. finger on the switch or plugging in power tools that have the switch on invites accidents. General safety rules d. Remove any adjusting key o

Summary of the content on the page No. 4

5. Battery tool use and care Be aware of hidden hazards, before drilling into walls, a. Ensure the switch is in the off position before floors or ceilings, check for the location of wiring and pipes. inserting battery pack. Inserting the battery pack into The blade will continue to move after releasing the switch. power tools that have the switch on invites accidents. Always switch the tool off and wait for the saw blade to b. Recharge only with the charger specified by the come to a comple

Summary of the content on the page No. 5

o The charger automatically shuts off if the battery will attain full capacity. The battery may become 130 C ambient temperature becomes too high. As a warm while charging; this is normal and does not indicate a consequence the charger will be inoperable. The problem. charging base must be disconnected from the Warning! Do not charge the battery at ambient temperatures mains supply and taken to an authorised service below 4 °C or above 40 °C. Recommended charging centre for repair. temperatu

Summary of the content on the page No. 6

When cutting thin sheet metal, clamp a piece of scrap our after-sales service and contacts are available on the wood to the back surface of the workpiece and cut through Internet at: www.2helpU.com. this sandwich. Batteries When cutting metal piping, do not cut directly through the Black & Decker batteries can be recharged many pipe as you would saw a wooden dowel. Instead, cut times. At the end of their useful life, discard around the circumference of the pipe to avoid pinching the bat

Summary of the content on the page No. 7

Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guaran

Summary of the content on the page No. 8

8 TYP. 1 CHS6000 11 10 1 9 8 2 1 7 2 6 2 4 3 2 12 8 2 5 2 14 2 2 13 2 www.2helpU.com 05 - 10 - 06 E14870

Summary of the content on the page No. 9

9

Summary of the content on the page No. 10

10

Summary of the content on the page No. 11

11

Summary of the content on the page No. 12

90510288 10/06