Summary of the content on the page No. 1
C150-E022-05EN
M3093EX AND M3093GX
IMAGE SCANNER
OPERATOR’S GUIDE
Summary of the content on the page No. 2
REVISION RECORD Edition Date published Revised contents 01 Dec., 1994 First edition 02 Jan., 1995 Document specification and others changed 03 Apr., 1995 Pick Roller replacement procedure added 04 Septermber, 1995 Pad replacement procedure added 05 January, 1996 Appendix C, Declaration of Conformity added Specification No.: C150-E022-05EN This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the
Summary of the content on the page No. 3
Conventions Special information, such as warnings, cautions are indicated as follows: WARNING A WARNING indicates that personal injury may result if you do not follow a procedure correctly. CAUTION A CAUTION indicates that damage to the scanner may result if you do not follow a procedure correctly. NOTICE A NOTICE provides "how-to" tips or suggestions to help you perform a procedure correctly. NOTEs are particularly useful for first-time users. ii
Summary of the content on the page No. 4
CONTENTS page CHAPTER 1 PREFACE .................................................................................................... 1-1 CHAPTER 2 COMPONENTS ........................................................................................... 2-1 2.1 Checking the Components ......................................................................................... 2-1 2.2 Part Names and Functions........................................................................................... 2-2
Summary of the content on the page No. 5
5.3.1 Cleaning the document cover, document holding pad, and document bed ........ 5-2 5.3.2 Cleaning the ADF ............................................................................................... 5-3 5.4 Consumables/Periodical replacement parts................................................................. 5-4 5.4.1 Parts number and replacement cycle................................................................... 5-4 5.4.2 Replacing pad ASY ........................................
Summary of the content on the page No. 6
FIGURES page 2.1 Received components ................................................................................................. 2-1 2.2 M3093EX/GX parts names ......................................................................................... 2-2 2.3 M3093EX/GX Indicators ............................................................................................ 2-4 3.1 SCSI-ID setting .................................................................................................
Summary of the content on the page No. 7
TABLES page 1.1 The differences between the M3093EX and the M3093GX....................................... 1-1 3.1 SCSI-ID setting ........................................................................................................... 3-6 6.1 Check items ................................................................................................................. 6-1 A.1 Installation specifications ...........................................................................................
Summary of the content on the page No. 8
CHAPTER 1 PREFACE This manual describes how to operate the M3093EX and M3093GX image scanners. An image scanner optically reads image information from a document and outputs the information to the host system. The differences between the M3093EX and the M3093GX image scanners are listed in table 1.1. Table 1.1 The differences between the M3093EX and the M3093GX Model number Interface Shipping Image size Automatic models document feeder M3093EX RS232C North America A4 size or letter Yes + size
Summary of the content on the page No. 9
This page is intentionally left blank. 1–2
Summary of the content on the page No. 10
CHAPTER 2 COMPONENTS 2.1 Checking the Components 2.2 Part Names and Functions 2.3 Indicator Panel Functions After unpacking image scanner, confirm that all the components have been received. This section describes the components of the image scanner and their functions. 2.1 Checking the Components These high precision components must be handled with care. Confirm that all the components shown in figure 2.1 have been received. If any component is missing, please contact your local Fujitsu sale
Summary of the content on the page No. 11
2.2 Part Names and Functions This section shows the exterior view of image scanner. This section also provides names of each part and describes their functions. 2.2.1 Exterior view of image scanner The image scanner can read a document of A4 or letter size at maxi- mum. Document holding pad Document cover Document bed Automatic document feeder (ADF) Indicators Stacker ADF lever ADF paper chute Third party slot opening (M3093EX) Power switch Interface connectors Power inlet Figure 2.2 M3093EX/GX
Summary of the content on the page No. 12
2.2.2 Functions of each part Document cover: Closed over and holds a document to be read. Document bed: A document to be read is placed on the bed also called Flatbed (FB). Document holding pad: Presses a document to the document bed. Automatic document feeder (ADF): Automatically feeds documents to the reading position. Stacker: Stacks the read documents. Power switch: Turns the power on or off. Indicators: These LEDs indicate the status of the scanner. ADF paper chute: Holds the documents to b
Summary of the content on the page No. 13
2.3 Indicator Functions Power Read Check Figure 2.3 M3093EX/GX Indicators 2.3.1 Indicators The meaning of each indicator is as follows: Power indicator (Green): Lights to indicate the power is on. Read (reading in progress) indicator (Green): Lights to indicate reading is in progress. Check (device check) indicator (Yellow): Lights if a device error occurs which may result in a service call. This indicator blinks if a document is jammed in the automatic document feeder. This indicator turns of
Summary of the content on the page No. 14
CHAPTER 3 INSTALLATION AND CONNECTIONS 3.1 Precautions 3.2 Removing the Carrier Fixing Bracket 3.3 Connections 3.4 Mounting the Stacker 3.5 SCSI-ID Setting This chapter explains how to install and connect the image scanner. 3.1 Precautions Do not install the image scanner in the following places and environ- ments. See the appendix A.1 “Installation Specifications” for the information such as size of installation space. Place the scanner away from electrical noise Do not install the scanner in
Summary of the content on the page No. 15
3.2 Removing the Carrier Fixing Bracket To keep the scanner from being damaged during shipping, the carrier unit is fixed with a bracket. After placing the carrier unit at the installation place, remove this bracket as explained below. 1 Place the image scanner on the edge of the desk top so that the left side (where ADF is placed) of the scanner extends from the desk top. Do not set the image scanner upside down or on its side. × × 2 Remove the carrier fixing bracket from position A . Then
Summary of the content on the page No. 16
3.3 Connections Connect the image scanner using the following procedure. 1 Set the power switch to off. Power switch 2 Connect the power cable. Connect the power cable to the power inlet on the back of the image scanner. Connect the other end of the power cable to a power outlet. Power outlet for North America Power inlet Power cable for Europe 3 Connect the interface cables (for M3093EX). Connect the interface cables to the interface connectors and fasten the cables with catches and screws as s
Summary of the content on the page No. 17
(M3093GX) Connect the interface cables to the interface connectors and fasten the cables with the catches. Connect the other ends of the cables to the host system. If the image scanner is at the terminal side, connect the terminator. Back of the image scanner Catches Terminator Catches If the image scanner is at ⎧ ⎫ ⎪ ⎪ the terminal side, connect To the Interface cables ⎪ ⎪ the terminator to the host ⎨ ⎬ connector to which an system ⎪ ⎪ interface cable is not ⎪ ⎪ connected. ⎩ ⎭ 3–4
Summary of the content on the page No. 18
→ ← 3.4 Mounting the Stacker Mount the stacker using the following procedure. Hook the pins on the stacker to the holes of the image scanner. Push Push 3–5
Summary of the content on the page No. 19
3.5 SCSI-ID Setting Use the address switches to set the device address. After the setting turn the power on. Address switch Interface connector Interface cable Figure 3.1 SCSI-ID setting Table 3.1 SCSI-ID setting ID Contents 0 to 7 Available 8, 9 No Operation * When the scanner is terminated device, the termination connector must be connected on one side of the connectors. 3–6
Summary of the content on the page No. 20
CHAPTER 4 OPERATIONS 4.1 Turning on the Power 4.2 Reading a Document in Flatbed Mode 4.3 Reading Documents in ADF Mode Documents can be read in the flatbed mode or automatic document feeder (ADF) mode. In the flat-bed mode, each document is placed on the document bed and is read one by one. In ADF mode, documents are fed and read automatically. This section explains how to turn on the power and how to read documents. NOTICE: If the “Check” indicator blinks in four seconds period, clean the ADF
