Summary of the content on the page No. 1
Model No. KV-S2025C / KV-S2025CU / KV-S2026C / KV-S2026CU
KV-S2045C / KV-S2045CU / KV-S2046C / KV-S2046CU
KV-S2025C
KV-S2025CU
KV-S2026C
KV-S2026CU
KV-S2045C
KV-S2045CU
KV-S2046C
KV-S2046CU
These instructions contain information on operating the scanner. Before reading these
instructions, please read the installation manual enclosed with this unit.
Please carefully read these instructions, the enclosed installation manual and maintenance
manual. Keep all documentation in a safe place for future
Summary of the content on the page No. 2
Thank you for purchasing a Panasonic “High Speed Color Scanner”. ≥ Panasonic supports your imaging needs with a reliable and easy-to-use document scanner. ≥ Panasonic has developed Panasonic Image Enhancement Technology to improve the quality of your scanned images even beyond the quality of your original document. ∫ System requirements When using the scanner, the required host computer conditions are as follows. KV-S2025C / KV-S2045C KV-S2026C USB Connection KV-S2026C SCSI Connection KV-S2046
Summary of the content on the page No. 3
Table of Contents Page Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Before ≥ KV-S2025C / KV-S2025CU / KV-S2026C / KV-S2026CU . . . . . . . . . . . . . . . 13 You Start ≥ KV-S2045C / KV-S2045CU / KV-S2046C / KV-S2046CU . . . . . . . . . . . . . . . 14
Summary of the content on the page No. 4
Notice Federal Communications Commission Requirements (For United States only) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc
Summary of the content on the page No. 5
Notice Español AVISO: PARA EVITAR LLAMAS O DESCARGAS ELÉCTRICAS NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD. LA TOMA DE CORRIENTE DEBERÁ ESTAR CERCA DE ESTE EQUIPO Y EN UN LUGAR DE FÁCIL ACCESO. Svenska 5
Summary of the content on the page No. 6
Notice (For United Kingdom only) For your safety please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp. fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amps. and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensur
Summary of the content on the page No. 7
Notice English The product should be used only with a power cord that is supplied by the manufacturer. Français Le produit ne devra être utilisé qu’avec le cordon d’alimentation fourni par le fabricant. Deutsch Dieses Gerät darf nur mit dem vom Hersteller gelieferten Netzkabel verwendet werden. Español Este producto deberá utilizarse solamente con el cable de alimentación suministrado por el fabricante. Svenska 7
Summary of the content on the page No. 8
Notice Roller cleaning paper precautions Before using the roller cleaning paper, please read these instructions completely. Keep these instructions for future reference. English WARNING Do not drink or inhale the roller cleaning paper fluid including isopropyl alcohol. The roller cleaning paper may be harmful to your skin, so please use protective gloves. Do not use the roller cleaning paper near a heater or open flame. Do not store the roller cleaning paper in direct sunlight or in a pl
Summary of the content on the page No. 9
Notice Español ADVERTENCIA No beba el líquido del papel de limpi eza de rodillos ni aspire las emanaciones del alcohol isopropílico que contiene. El papel de limpieza de rodillos pu ede ser perjudicial para las pieles sensibles, por favor use guantes de protección. No utilice el papel de limpieza de rodi llos cerca de una calefacción o una llama. No guarde el papel de limpieza de r odillos expuesto a la luz solar directa ni en un lugar donde la temperatura sea superior a 40°C. Utilice
Summary of the content on the page No. 10
Precautions The following precautions are recommended to extend the life of the unit, and for your safety. Prior to scanning, remove, Do not place any liquids near the unit. Do not place books, paper, all staples and paper clips or other items on the unit. —Accidental spillage of liquid into the unit from pages. may cause severe damage. If this occurs, turn the unit off, unplug the power cord and call for service. Do not place the unit in an area where there is a lot of Do not leave the power c
Summary of the content on the page No. 11
Precautions Operating Environment Do not place the unit in direct sunlight or in a cold Do not use the unit in a vertical position. draft. Do not place the unit near a heating appliance or an Do not place the unit near other appliances which gen- air conditioning vent. Do not place the unit in a room erate large electrical noise. with extremely high or low humidity. Do not place the unit on a carpet. (Static electricity Do not drink or inhale the included roller cleaning paper can cause the unit
Summary of the content on the page No. 12
Precautions ∫ CD-ROM To prevent the CD-ROMs from accidental damages: Do not touch or write on the surface Do not leave the disc out of the Do not leave the disc in direct of the disc. protective case. sunlight or near heat sources. Do not place heavy objects on the To clean the disc, hold the disc by disc case or drop the case. its edges and wipe it from the center to the edges with a dry, soft cloth. 12
Summary of the content on the page No. 13
Component Identification ∫ KV-S2025C / KV-S2025CU / KV-S2026C / KV-S2026CU Document guides ADF door Paper feed roller ADF door release Feed tray STOP/START button Feed extension LED tray Radiation vent Business card stopper Exit extension tray Exit stopper Power switch Business card guides Exit tray DIP switch USB connector SCSI connectors (Only for KV-S2026C, KV-S2026CU) AC inlet Power cord Power cord shown on the figure is for 100-120 V. 13
Summary of the content on the page No. 14
Component Identification ∫ KV-S2045C / KV-S2045CU / KV-S2046C / KV-S2046CU Document guides Imprinter door ADF door Paper feed roller ADF door release Feed tray STOP/START button Feed extension tray LED Radiation vent Business card stopper Exit stopper Power switch Exit extension tray Business card Exit tray guides DIP switch USB connector SCSI connectors (Only for KV-S2046C, KV-S2046CU) Imprinter door pull Imprinter door AC inlet Power cord Power cord shown on the figure is for 100-120 V. 14
Summary of the content on the page No. 15
Component Identification ∫ Power turn-on sequence Turn on the power of the scanner. 1 ≥ Press the power switch. (The LED will now light.) Turn on the power of the host 2 computer after scanner’s LED lights green. ≥In case of the USB connection, the host computer recognizes the scanner auto- matically when the scanner is powered on LED even after the host computer is powered on. ∫ About LED LED indicates the status of the scanner as follows: LED light Status Green Ready to scan or scanning Gree
Summary of the content on the page No. 16
Component Identification ∫ About the SCSI setting When connecting the scanner to a SCSI chain using a SCSI cable, perform the SCSI ID setting correctly. The scanner is provided with a DIP switch for the SCSI ID No. setting and the terminator setting. SCSI ID Setting Switch ID No. Remarks #2 #1 #0 0OFF OFF OFF 1OFF OFF ON 2OFF ON OFF 3OFF ON ON 4ON OFF OFF 5ON OFF ON 6 ONONOFF Default setting 7ONONON SCSI Terminator Setting Function Switch Description Enable ON ≥ The last device in the SCSI chain
Summary of the content on the page No. 17
Loading Documents Documents that have been stapled Prior to scanning, remove, all staples and paper clips 1 together or stacked together (as in a from pages. file folder) will need to be separated. 1 Fan the stack of documents to sepa- rate all the edges. 2 Hold both ends and bend the docu- ments as shown in the illustration. 1 3 To flatten the documents, hold firmly and pull them apart as shown in the illustration. Repeat these steps as necessary. 2 3 Carefully align the documents. 2 Adjust the
Summary of the content on the page No. 18
Loading Documents When scanning paper longer than the Feed extension tray 4 feed tray, pull out the feed extension tray from the feed tray and the exit extension tray as shown in the figure on the right. ≥The exit extension tray of KV-S2045C, Exit stopper KV-S2045CU, KV-S2046C and KV-S2046CU is fixed. Adjust the position of the exit stopper. Exit extension tray ≥When using small sized documents like business cards, raise the business card guides and the business card stopper. Caution: Do not use
Summary of the content on the page No. 19
Loading Documents Adjust the document guides to the size Document guides 6 of the documents. Set documents under the paper feed Paper feed roller 7 roller. 1 1 Lift the paper feed roller as shown in the figure. 2Push documents in the direction of the arrow until they stop under the 2 paper feed roller. Caution: ≥ Acceptable documents are as follows. Paper size: 50.8 k 70 mm (2.0 k 2.8 in.) to 216 k 356 mm (8.5 k 14 in.) Paper thickness: Single paper feed: 0.05 to 0.15 mm (2.0 to 5.9 mils) Conti
Summary of the content on the page No. 20
Clearing Paper Jams Torn documents, thin documents or documents that are creased on the top edge may cause paper jams. If a paper jam occurs, remove the jammed sheet according to the following procedure. ∫ Removing paper jams from the feed part Push the ADF door release to open the 1 ADF door. Remove the jammed document. 2 ≥If the jammed document remains at the feed tray side, pull it up. ≥If the jammed document appears at the exit tray side, remove it from the exit side. 20
