Summary of the content on the page No. 1
VN-T16/U
HD IP CAMERA
QUICK GUIDE
Summary of the content on the page No. 2
Contents 1 Introduction.............................................................................................................................................................................................2 Unpack Everything............................................................................................................................................................................2 Prepare for Installation..............................................................
Summary of the content on the page No. 3
1 Introduction Thank you for purchasing the camera. Before installing it, please verify your model and read this guide carefully. See the INSTRUCTIONS located on CD-ROM for more information about setting up your camera. Unpack Everything • HD IP CAMERA • WARRANTY CARD • SAFETY PRECAUTIONS • QUICK GUIDE • 8-PIN TERMINAL BLOCK for alarm input/output • CD-ROM containing INSTRUCTIONS and IP Finder software Prepare for Installation Select the lens to use with your camera. This cam
Summary of the content on the page No. 4
Dimensions and Connect the Wiring 3 Safety Wire (Fall Prevention Wire, not provided) 2 Lens is not provided. 3
Summary of the content on the page No. 5
1. CS mount: connect the 1/3-type CS mount lens with the camera 2. Screw: lock Back focus Adjustment 3. Back focus Adjustment 4. Base: connect the camera with the tripod 5. SD card slot: insert a SD card into this slot for recording and storage 6. Video: not supported (for factory use only) 7. RJ45 Ethernet Connector/ PoE: insert the RJ45 cable for network connection. It also supports PoE (Power over Ethernet). 8. Default Button: reset all of the camera parameters to factory default b
Summary of the content on the page No. 6
Accessories and choose Command Prompt.) Type: Ping 192.168.0.2. If the message “Reply from… ” appears, it means the connection is done. 4. Start Internet Explorer and enter IP address: 192.168.0.2. A login window will appear. Enter the default user name: admin and password: jvc to log in. 5. Images of the camera can be viewed through Internet Explorer. Before viewing, follow these steps to enable the display. a. Enable Cookies as shown below: • In Internet Explorer, click Internet O
Summary of the content on the page No. 7
• In Windows 7 only, Click Tools è Internet Options è Security Enable Protected Mode (require restarting Internet Explorer) è Unchecked • Click Custom Level. This will open the Security Settings – Internet Zone screen. • Scroll down to the ActiveX controls and plug-ins radio buttons and set as follows : Download signed ActiveX controls è Prompt (recommended) Download unsigned ActiveX controls è Prompt Initialize and script ActiveX not marked as safe for scripting è Prompt
Summary of the content on the page No. 8
Run ActiveX controls and plug-ins è Enable Script ActiveX controls marked safe for scripting* è Enable • Press OK to save the settings. Close all Internet Explorer windows and start a new window. This will allow the new settings to take effect. 6. Type your setting IP address into the browser. 7. Then you should be able to see the camera image screen. 7
Summary of the content on the page No. 9
Using “IP Finder” to Search Camera’s IP Address The IP Finder is a tool which helps users to find VN-T16/216 series network cameras in the LAN which your computer is connected. Please note that IP Finder is only compatible with Windows 7, windows Vista and Windows XP. 1. Insert the CD-ROM in the CD-ROM drive. 2. Copy the IP Finder’s folder to your computer. 3. Double click the IpFinder.exe in your computer’ s IP Finder folder. An IP Finder window will pop out. The window will displa
Summary of the content on the page No. 10
3 Warnings Installation and maintenance should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. DANGER! AC24V models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards. Power over Ethernet (PoE) should meet the IEEE 802.3af. PoE standard. 4 Dimensions Lens is not provided 9
Summary of the content on the page No. 11
5 Specifications Operational Specifications Image device 1/2.7-type Mega-pixel CMOS sensor Sensitivity Color:0.6 lx, B/W: 0.6 lx (50% F1.2) Day/Night Easy D/N Auto Gain Control Off/On, selectable White Balance ATW (2800K~ 8500K) and Manual NTSC: 1/30~1/10000 sec Electric Shutter PAL:1/25~1/10000 sec Noise Reduction Yes Motion detection Yes 1/3-type CS mount Lens Mount (with easy back focus adjustment) BLC Yes Audio Line in/out Alarm 1 in / 1 out (Alarm out spec: 0.5A /
Summary of the content on the page No. 12
PAL: 1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 576), 4CIF(704 x 576), VGA(640 x 480), CIF(352 x 288), QVGA(320 x 240) NTSC: Up to 30fps Image Frame Rate PAL: Up to 25fps Multiple user access levels with password Security protection Users 1 Administrator, 5 Users Video Access from Full control of all camera settings available to Web Browser administrator Windows XP or Windows 7 as OS, Internet Explorer Version 6.0-8.0, Minimum Web Browsing
Summary of the content on the page No. 13
Power Input: spring terminal Network: RJ45 connector Connectors Audio In/out: removable terminal block Alarm In/out: removable terminal block Environmental Operating -10°C to 50°C Temperature Operating Humidity 0% to 90% Storage Temperature -20°C to 60°C © 2012 JVC KENWOOD Corporation 12
