Summary of the content on the page No. 1
Network Camera
Operating Instructions
Model No. KX-HCM10
PLEASE READ BEFORE USE AND SAVE.
Panasonic World Wide Web Address: http://www.panasonic.com
for customers in the USA or Puerto Rico
Summary of the content on the page No. 2
Operating Instructions Introduction Thank you for purchasing the Panasonic Network Camera. When unpacking, check the following items. CD-ROM ----- one Operating Instructions ----- one Getting Started ----- one Note: Directory and file structure of this CD-ROM The directory structure of this CD-ROM and the main files position are as follows. To see the manuals in CD, it is necessary to use Adobe® Acrobat® Reader 4.05. Main files included in the CD-ROM ROOT Readme file README.TXT Program to acces
Summary of the content on the page No. 3
Operating Instructions Trademarks Netscape® and Netscape Navigator® are registered trademarks of Netscape Communications Corporation in the U.S. and other countries. Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Ethernet® is a registered trademark of Xerox Corporation. Microsoft®, MS-DOS®, Windows®, Windows NT®, Internet Explorer and Active X® are either registered trademarks or trademarks of
Summary of the content on the page No. 4
Operating Instructions Table of Contents 1 Installation...................................................................... 6 1.1 Overview........................................................................................... 7 1.1.1 Features ......................................................................................................7 1.1.2 System Requirements.................................................................................8 1.2 Included Accessories...............
Summary of the content on the page No. 5
Operating Instructions 4.2 Troubleshooting .............................................................................. 81 4.3 Important Safety Instruction ........................................................... 86 4.4 FCC and Other Information ............................................................ 87 5 Index..............................................................................89 [For assistance : 1-800-272-7033] 5
Summary of the content on the page No. 6
Operating Instructions Section 1 Installation 6
Summary of the content on the page No. 7
Operating Instructions 1.1 Overview 1.1.1 Features The main features of the Network Camera are described as follows. Ease of Use This network camera has its own built in web server. Once the camera is connected to your Ethernet network and the card is configured, JPEG images can be easily viewed on your standard Internet browser. High Speed Motion JPEG With the proper hardware you can display motion images at 15 fps. Remote Pan and Tilt Control The camera position can be easily adjusted from
Summary of the content on the page No. 8
Operating Instructions Easily Upgraded — Ease of System Administration Downloadable Firmware Anytime improvements or changes are made you'll be able to get the latest firmware at no charge from the Panasonic web site. Since the user interface is your web browser, it's fast and easy to do! See Page 65 for more detailed information. Password Protection For your network's protection your configuration settings can be password protected. See Page 46 for more detailed information. 1.1.2 System Re
Summary of the content on the page No. 9
Operating Instructions Note To prevent the limitation from the performance of the CPU inside the Computer, it is recommended to use a computer of Pentium II(300MHz) or more. [For assistance : 1-800-272-7033] 9
Summary of the content on the page No. 10
Operating Instructions 1.2 Included Accessories For extra orders, call 1-800-332-5368. AC adaptor --- One Stand --- One Order No. PQLV10Y Order No. PSKLHCM10M Screws --- Two CD-ROM --- One Order No. PSHE5004Z Order No. PSQX2432 Washers --- Two Order No. XWG35FY If any items are missing or damaged, ask the dealer where you purchased the product. The order numbers listed above are subject to change without notice. Save the original carton and packing materials for future shipping and trans
Summary of the content on the page No. 11
Operating Instructions 1.3 Part Names 1.3.1 Front View Power LED Fixed Focus Lens (1m - Infinity) Information Power LED blinks in the following states. While lens moves to the Home Position after turning on the power. When performing Update Firmware. When you pushed CLEAR SETTING button. The KX-HCM10 hardware is defective. Please refer to Section 4.2 Troubleshooting. CAUTION Network Camera is intended for indoor use only. Prolonged exposure to direct sunlight or halogen light may dam
Summary of the content on the page No. 12
Operating Instructions 1.3.2 Rear View CLEAR SETTING button I/O Connector MAC address and serial number are indicated on the label Ethernet port Used for mounting the unit (RJ-45) on the Stand or the wall Ethernet Indicator DC IN jack Hook for AC adaptor cable * Use category 5 cross cable when KX-HCM10 is directly connected to PC. CAUTION Use ONLY with Panasonic AC adaptor (Order No. PQLV10Y). 1.3.3 Bottom View Tripod Mounting Hole 12
Summary of the content on the page No. 13
Operating Instructions 1.4 Setup Please confirm the connection of your network into following figure and check the Connection No. 1 - 6. This Connection No. is used by explanation of Section 1.5 Network Camera Configuration. 1.4.1 Diagram of Connections Direct Connection to Personal Computer (without Ethernet Hub) Power source AC Adaptor Power Connection 1 outlet Note : Without Hub, you should use Category 5 Cross Cable. Intranet Connection with Ethernet Hub Power source Ethernet Ethernet
Summary of the content on the page No. 14
Operating Instructions Internet Connection Ethernet Switching Hub 10 Base-T Ethernet Connection 3 Cable Modem Single (1 port) Camera Cable Line Connection 4 *1 Router( ) Cable/xDSL Modem (1 port) Cable/xDSL Line Internet Connection 5 Cable/xDSL Modem with Router (n port) Connection 6 Information *1) Router or Panasonic Broadband Networking Gateway KX-HGW200 1.4.2 Preparation Before starting to install the Network Camera, make sure that you have everything: A Windows computer with web brows
Summary of the content on the page No. 15
Operating Instructions 1.4.3 Mounting You can install the Network Camera in the following ways. Installing on the Stand Installing on a tripod a) Fix the Network Camera to the a) Attach the Network Camera to Stand. the tripod by using the tripod bolt. Installing on the wall Installing on the ceiling a) Screw the two screws a) Screw the two screws (accessories) into the wall. The (accessories) into the ceiling. distance of two screws should The distance of two screws be 2.75" (70 mm). should
Summary of the content on the page No. 16
Operating Instructions 1.4.4 Connecting the Network Camera to Network 1. Connect the category 5 straight cable to Ethernet port of the Network Camera and Ethernet Hub. Ethernet port To Network 2. Connect the category 5 straight cable to the LAN port of the computer and Network. Ethernet port To Network Computer (Rear Side) Note If you connect Network Camera to PC directly, you should use Category 5 Cross Cable. 1.4.5 Turning on the Network Camera 1. Connect the DC plug of the AC adaptor to th
Summary of the content on the page No. 17
Operating Instructions * Thread the AC adaptor line AC plug through the hook downward. Power Outlet DC plug (AC120 V, 60 Hz) AC adaptor (included accessory) CAUTION The AC Adapter is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. Use Only with Panasonic AC adaptor (Order No. PQLV10Y). 2. After the power is connected the Network Camera will initialize. The power LED will come on and the pan - tilt moto
Summary of the content on the page No. 18
Operating Instructions 1.5 Network Camera Configuration In order to set up Network Camera Configuration, the following items are used in this Section. Static : IP Address/Subnet Mask or DHCP (Dynamic Host Configuration Protocol) : Host Name Port No. Default Gateway DNS Server1/DNS Server (DNS : Domain Name System) DDNS (Dynamic Domain Name System) : Your E-mail Address/Personal (Camera) URL/Purchase Link Please confirm it from your network administrator. Information: If you want to k
Summary of the content on the page No. 19
Operating Instructions 1. Setup Connection It is necessary to connect locally PC and Network Camera, as follows. (Without Ethernet Hub, you should use Category 5 Cross Cable.) Ethernet Hub or (Category 5 Straight Cable) Router or 2. Insert the Setup CD-ROM in the CD-ROM Drive of your computer. The following screen is displayed. (If the screen does not appear, please open "setup.exe" file in the CD-ROM.) 3. After confirmation of connecting of the Network Camera to a network, turn on the power a
Summary of the content on the page No. 20
Operating Instructions (i) Note Ethernet defines a 48-bit addressing scheme. Each computer or device attached to an Ethernet network is assigned a unique 48-bit number known as its Ethernet address. To assign an address, Ethernet hardware manufacturers purchases blocks of Ethernet addresses and assign them in sequence as they manufacture Ethernet interface hardware. Thus, no two hardware interfaces have the same Ethernet address. Usually, the Ethernet address is fixed in machine readable f
