Summary of the content on the page No. 1
Color CCTV Camera
Operating Instructions
Model No. WV-CS854B
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS ENGLISH
Summary of the content on the page No. 2
ENGLISH VERSION For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This CAUTION equipment generates, uses, and can radiate radio frequency RISK OF ELECTRIC SHOCK energy and, if not installed and used in accordance with the DO NOT OPEN instruction manua
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarize
Summary of the content on the page No. 4
-4-
Summary of the content on the page No. 5
CONTENTS PREFACE .......................................................................................................................... 6 FEATURES ........................................................................................................................ 6 Camera Cleaning ....................................................................................................... 7 Preset Data Uploading or Downloading ...............................................................
Summary of the content on the page No. 6
PREFACE Panasonic presents highly advanced CCTV technology A newly developed 1/4-inch CCD is employed for use that meets the demands of new and ever-changing under extremely low light conditions: 0.06 lx for applications. monochrome and 1 lx for color. This high-performance combination color camera is It also assures clear display of pictures in which bright utilized as a video surveillance device. and dark objects coexist without mutual interference The camera incorporates Super-Dynamic 2 Digit
Summary of the content on the page No. 7
Downloading or uploading the data may not work Camera Cleaning normally if these functions are set to ON. Even if this function is used, noise may be produced • Alarm (see page 31) on the monitor screen, or the preset position may • Preset alarm (see page 33) deviate in the course of prolonged use. • Cleaning (see page 32) In such cases, activate the refresh mode on the special • Motion detection (see page 39) 2 menu. (See page 42.) • Auto mode (see page 23) • Self return (see page 23) To use
Summary of the content on the page No. 8
9. Do not operate the camera beyond the specified 14.Prevention of blooming and smear temperature, humidity or power source ratings. When the camera is aimed at a bright light source, Do not use the camera in an extreme environment such as a spotlight, or a surface that reflects bright where high temperature or high humidity exists. Do light, smear or blooming may appear. Therefore, not place the camera near heat sources such as the camera should be operated carefully in the radiators, stoves or
Summary of the content on the page No. 9
CONSTRUCTION q w e yu r t i o !0 q Alarm Input Connector y Camera Mounting Base w Alarm Output Connector u Panning Start Point e Video Output Connector i Fall Prevention Wire r Data Port o Decoration Cover t Power Cable !0 Dome Cover -9-
Summary of the content on the page No. 10
SETUP Setup Menu Setup menus are shown in the diagram below. You can adapt the camera to your requirements by setting up the respective items in these menus. Menus are incorporated in a hierarchical structure, from the setup menu at the top to manual mask area selection at the bottom. These menus are described on the following pages for reference. Switches, keys and the joystick are used in the setup operations. Setup Preset Menu (P. 18) Menu Preset Setting Menu Map Menu Preset No.Setting (P.
Summary of the content on the page No. 11
Position Setting (P. 18) Preset ID Editing (P. 18) Manual Level Adjustment Preset Identification Setting Super-D2 OFF (P. 35) (Contrast) (P. 36) (P. 20) Manual Mask Area Selection Super-D2 ON (P. 35) Light Control Setting (P. 21) (P. 35) Manual Iris Adjustment (P. 35) Dwell Time Setting (P. 21) Scene File Setting (P. 21) Shutter Speed (P. 36) Gain Control (P. 36) Preset Speed (P. 22) Electronic Sensitivity Manual Level Adjustment Enhancement (P. 36) (AWC) (P. 38) Zone Number Selection (P. 27)
Summary of the content on the page No. 12
The keys (switches) to be used for setup are shown in the table below. The joystick on the connected controller may also be used for setup. The table also shows the functions and the operations of the individual controllers. For details, see the manual for the controller to be used. Switches and controls are abbreviated as SW and CTRL respectively in the table. [WV-CU550C/CJ] Function/Controller WV-CU550C/CJ WV-CU360C/CJ WV-CU161C WV-RM70 Joystick FOCUS Switch CAM SETUP key CAMERA SETUP ZOOM Swi
Summary of the content on the page No. 13
SQ: Starts the sequence function. Setup Menu Description SR: Starts the sort function. Presetting PT: Starts the patrol function. (1) Position (POSITION SET) See page 23 for the setting. Aligns the camera position and focal point by panning, tilting, zooming and focusing. See page 18 for the setting. Auto Mode (AUTO MODE) The auto mode is used for setting the movement of the (2) Preset Identification (PRESET ID) camera. Assigns the name for preset IDs (identification of up You can select o
Summary of the content on the page No. 14
(2) Proportional Pan-Tilt Speed (PROPO. P/T) (9) Image Hold (IMAGE HOLD) If ON is selected, the pan-tilt speed changes The camera picture remains as a still image on the automatically corresponding to the zoom ratio. For monitor screen or until the camera reaches the example, the pan-tilt speed slows down when the preset position. This function is useful for camera zooms in. See page 28 for details. surveillance via a local area network. (3) Area Title (AREA TITLE) (10)Tilt Angle 0 °/5 ° Up to 8
Summary of the content on the page No. 15
Generally, when a light from the background is too (6) Synchronization (SYNC) strong such as a spotlight, all objects except the You can select the internal sync (INT) mode or the main object in the picture are displayed darker line-lock sync (LL) mode. Additionally, this model because the lens iris is adjusted with respect to accepts the VD2 signal from a specified component. strong brightness. This model ignores strong Whenever the VD2 signal is supplied to this camera, brightness by masking t
Summary of the content on the page No. 16
(9) Auto Focus (AF MODE) The camera adjusts the focus automatically by sensing the center of the picture. S, M and L stand for the size of the sensing area: Small, Middle and Large. See page 40 for details. MANUAL S, M, L: Auto-focus is activated only when the AF key on the controller is pressed. AUTO S, M, L: Auto-focus is activated automatically while a manual pan, tilt or zoom operation is performed. Note: If SENS UP is set to ON except x2 FIX or x2 AUTO, the AUTO (S/M/L) mode is disabled and
Summary of the content on the page No. 17
SETTING PROCEDURES The following setting procedures are described on the Submenu Display assumption that this model is used in combination with The items marked O can be selected/changed on the WJ-SX550C Matrix Switcher and WV-CU550C/CJ submenu. System Controller. In case a controller other than WV- CU550C is used, refer to the table on page 12. ** RS485 SET UP ** UNIT NUMBER 1 SUB ADDRESS 1 BAUD RATE 19200 Menu Display DATA BIT 8 PARITY CHECK NONE Setup Menu Display STOP BIT 1 XON/XOF
Summary of the content on the page No. 18
Notes: Preset Menu • The * mark indicates that the position number Preset Menu Display has been preset. 1. Displaying the preset menu directly • The character H refers to the home position. (1) Move the cursor to PRESET 1 O and select the • The second line from the bottom shows the position number with the joystick. preset ID corresponding to the selected number. (2) Press the CAM (SET) key. "DOOR" next to "ID" in the example shown right is The preset setting menu appears on the monitor for
Summary of the content on the page No. 19
3. Pan Offset 4. To Set the Lens Zoom and Focus Positions If the camera is replaced with a new one, the pan (1) Move the cursor to PUSH SET for ZOOM/FOCUS offset function is used to adjust its positions to be and press the CAM (SET) key. The ZOOM/FOCUS the same as before except patrol setting. setting menu appears. The system controller can download or upload the preset position data. ** POSITION 1 ** PAN/TILT →PUSH SET Caution: The preset data for other cameras (WV- ZOOM/FOCUS →PUSH SET CS6
Summary of the content on the page No. 20
(2) Display the most prospective ID. Preset Identification Setting (PRESET (3) Follow the step "To Change an Entered Preset ID) ID" if necessary. 1. Move the cursor to PRESET ID on the preset setting menu and select ON or OFF with the joystick. To Change an Entered Preset ID The factory default setting is OFF. (1) Move the pointer to the character to be edited in the editing area with the joystick. PRESET NO. 1* (2) Select a new character with the joystick. (3) Press the CAM (SET) key to
