Summary of the content on the page No. 1
Summary of the content on the page No. 2
TABLE OF CONTENTS ABOUT THIS GUIDE ...................................................3 INTRODUCTION............................................................4 FEATURES AND BENEFITS .............................................................. 5 UNPACKING THE PACKAGE............................................................ 8 SYSTEM REQUIREMENT ................................................................. 9 COMPONENTS GUIDE .........................................................
Summary of the content on the page No. 3
C TROUBLESHOOTING............................................................ 95 D TIME ZONE TABLE.............................................................. 99 E ADJUSTING CAMERA FOCUS............................................. 101 F I/O TERMINAL APPLICATION ............................................ 103 G SPECIFICATION.................................................................. 105 H GLOSSARY OF TERMS ....................................................... 107 2
Summary of the content on the page No. 4
ABOUT THIS GUIDE This manual provides instructions and illustrations on how to use your TV-IP301/TV-IP301W Advanced Day/Night (Wireless) Internet Camera Server with Audio, includes: Chapter 1, Introduction, provides the general information on the camera. Chapter 2, Hardware Installation, describes the hardware installation procedure for the camera. Chapter 3, Security, explains the security feature of the camera. Chapter 4, Application of the Camera, provides the illustrations of
Summary of the content on the page No. 5
1 INTRODUCTION Thank you for purchasing the TV-IP301/TV-IP301W Advanced Day/Night (Wireless) Internet Camera Server with Audio, a standalone system that can be connected directly to an Ethernet or Fast Ethernet network. With support for latest MPEG4 technology, you can record streaming video that utilizes high quality MPEG-4 images to your hard drive, enable motion detection and setup automated e-mail alerts for security. The built-in microphone provides you with the audio function, al
Summary of the content on the page No. 6
Features and Benefits Simple to Use TV-IP301/TV-IP301W Advanced Day/Night (Wireless) Internet Camera Server with Audio is a standalone system with built-in CPU, no special hardware (such as a PC frame capture card) or software required. The camera supports DirectX 9.0; therefore, the only requirement you need is the web browser software such as Internet Explorer 5.0 or above. Once you have a valid IP Address, just connect it and you can view the picture and receive sound from your camer
Summary of the content on the page No. 7
Remote Utility The powerful IPView Pro application assigns the administrator with a pre-defined user ID and password, so that the administrator can modify the camera’s settings from the remote site via Intranet or Internet. When new firmware is available, you can also upgrade remotely over the network for added convenience. Users are also allowed to monitor the image and take snapshots. Connection to External Devices Supporting auxiliary Input/Output Connector, you can connect the cam
Summary of the content on the page No. 8
RS-485 Support The pin 7 & 8 of the I/O connectors are used for RS-485 data transmission. You can connect a special featured device (such as an external camera stand with rotation function) to meet you needs. When the external device is connected, you can configure the settings and control the device from the RS-485 window of Web Configuration Utility. Day & Night Feature The camera equipped with a Day & Night CCD IR lens which included 12 infrared LEDs to provide crystal clear images
Summary of the content on the page No. 9
Unpacking the Package Unpack the package and check all the items carefully. One TV-IP301 or TV-IP301W. One External Antenna (TV-IP301W only) One Multi-Language Quick Installation Guide One Driver & Utility CD-ROM with User’s Guide One AC power adapter suitable for your country’s electric power. One Metal Camera Stand. One RJ45 Ethernet Cable If any packaging content is damaged or missing, please contact your local dealer immediately. Also, keep the packing materials and box
Summary of the content on the page No. 10
System Requirement Networking Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Ethernet. Wireless Local Area Network (TV-IP301W only): IEEE 802.11g WLAN. Accessing the Camera For Web Browser Users OS: Microsoft® Windows® 98SE/ME/2000/XP CPU: Intel Pentium III 350MHz or above Memory Size: 128MB Resolution: 800x600 or above Microsoft® Internet Explorer 5.0 or above For IPView Pro Application Users OS: Microsoft® Windows® 98SE/ME/2000/XP. CPU: Intel Pentium 1GHz or
Summary of the content on the page No. 11
Components Guide This section provides the multi-views of the camera and explains the function of each component. Front, Side and Top/Bottom Panel 3. Internal MIC 1. Screw Hole 4. IR Lens Power Cable 2. DC-Iris Connector 10
Summary of the content on the page No. 12
1. Screw Hole Located on the top/bottom panel of the camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the camera. 2. Internal MIC The built-in omni-directional microphone allows the camera to receive sound and voice. 3. DC-Iris Connector The camera supports additional DC-Iris lens, and provides the power and control signal required for adjusting the lens through this DC-Iris connector
Summary of the content on the page No. 13
Rear Panel 1. Antenna (TV-IP301W) 2. Mic-In Connector 8. I/O Connector 7. Reset Button 6. Network Cable Connector 5. Iris Level 4. Power/Link LEDs 3. DC Power Connector 1. Detachable Antenna (TV-IP301W) The detachable external antenna allows you to adjust its position to obtain the maximum signal. 2. Mic-In Connector This connector allows you to connect an external microphone. 3. DC Power Connector The DC power input connector is located on the
Summary of the content on the page No. 14
4. Power/Link LEDs The upper LED indicates the camera is powered on with a steady GREEN light. The lower LED indicates the camera has good connection to LAN /WLAN connectivity with a steady GREEN light. It begins flashing to indicate the camera is receiving/sending data from/to the LAN/WLAN. 5. Iris Level This screw-knob is useful only when the DC-Iris lens is connected to the camera. You can adjust the brightness of the video images from the DC-Iris lens. 6. Network Cable Connect
Summary of the content on the page No. 15
2 HARDWARE INSTALLATION Attaching the Camera to the Stand The Internet camera comes with a camera stand, which has a swivel ball screw head that can be attached to the camera’s screw hole on the up (or bottom) panel. Attach the camera to the stand and station it for your application. There are three holes located in the base of the camera stand, allowing the camera to be mounted on the ceiling or any wall securely. 14
Summary of the content on the page No. 16
Connecting the Ethernet cable Connect an Ethernet cable to the network cable connector located on the camera’s rear panel, and then attach it to the network. Attaching the Power Supply Attach the power supply plug to the cable of the lens (A), and then connect the cable’s plug to the power connector located on the camera’s rear panel labeled DC 12V (B). Then, connect the power supply to the wall outlet (C). 15
Summary of the content on the page No. 17
3 SECURITY To ensure the highest security and prevent unauthorized usage of the camera, the administrator has the exclusive privilege to access the System Administration for settings and control requirements to allow users the level of entry and authorize the privileges for all users. The camera supports multi-level password protection. Accessing to the camera is strictly restricted to defined users with a "User Name" and "User Password", which are assigned by the administrator. The
Summary of the content on the page No. 18
4 APPLICATIONS The TV-IP301/TV-IP301W Advanced Day/Night (Wireless) Camera Server with Audio can be applied in wide variety of applications, including: Monitor local and remote places and objects through a web browser, such as construction sites, hospitals, parks, schools and day-care centers. Capture single frame images or video images from the IPView Pro application. Connect up to two external devices to the camera for alarm notifications; in addition, when the trigger is activat
Summary of the content on the page No. 19
Applications of the Camera Home/ Business Application Diagram 18
Summary of the content on the page No. 20
I/O Connector Application Diagram 19
