Summary of the content on the page No. 1
Dell™ PowerEdge™ R900 Systems
Getting Started
With Your System
Guide de mise en route
Primeiros passos com o sistema
Procedimientos iniciales con el sistema
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Dell™ PowerEdge™ R900 Systems Getting Started With Your System
Summary of the content on the page No. 4
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. © 2007 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written p
Summary of the content on the page No. 5
System Features The major hardware and software features of your system include: ® ® Two, or four Quad-Core Intel Xeon Processors 7300 Series. Support for symmetric multiprocessing (SMP), which is available on systems with two or four Intel Xeon microprocessors. SMP greatly improves overall system performance by dividing microprocessor operations between independent microprocessors. To take advantage of this feature, you must use an operating system that supports multiprocessing. NOTE:
Summary of the content on the page No. 6
Four USB 2.0-compliant connectors (two on the front and two on the back) capable of external support for a diskette drive, a CD-ROM drive, a keyboard, a mouse, or a USB flash drive. Optional remote access controller (Dell Remote Assistant Card or RAC) for remote systems management. An integrated VGA-compatible video subsystem with an ATI ES1000, 33-MHz PCI video controller. This video subsystem contains a minimum of 16MB of graphics memory with support for 2D graphics. Maximum resolu
Summary of the content on the page No. 7
Other Information You Might Need CAUTION: The Product Information Guide provides important safety and regulatory information. Warranty information may be included within this document or as a separate document. The Rack Installation Guide or Rack Installation Instructions included with your rack solution describes how to install your system into a rack. The Hardware Owner’s Manual provides information about system features and describes how to troubleshoot the system and install or rep
Summary of the content on the page No. 8
Installation and Configuration CAUTION: Before performing the following procedure, read and follow the safety instructions and important regulatory information in your Product Information Guide. This section describes the steps to set up your system for the first time. Unpacking the System Unpack your system and identify each item. Keep all shipping materials in case you need them later. 6 Getting Started With Your System
Summary of the content on the page No. 9
Installing the Rails and System in a Rack Once you have read the "Safety Instructions" located in the rack installation documentation for your system, install the rails and the system in the rack. See your rack installation documentation for instructions on installing your system in a rack. Getting Started With Your System 7
Summary of the content on the page No. 10
Connecting the Keyboard, Mouse, and Monitor Connect the keyboard, mouse, and monitor (optional). The connectors on the back of your system have icons indicating which cable to plug into each connector. Be sure to tighten the screws (if any) on the monitor's cable connector. 8 Getting Started With Your System
Summary of the content on the page No. 11
Connecting the Power Connect the system’s power cable(s) to the system. Secure the cables with the provided straps. Plug the other end of the cable into a grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a power distribution unit (PDU). Getting Started With Your System 9
Summary of the content on the page No. 12
Turning the System On Press the power button on the system and the monitor (optional) to turn on the system. The power indicators should light. Adjust the monitor's controls until the displayed image is satisfactory. Complete the Operating System Setup If you purchased a preinstalled operating system, see the operating system documentation that ships with your system. To install an operating system for the first time, see the Quick Installation Guide. Be sure the operating system is install
Summary of the content on the page No. 13
Technical Specifications Processor ® ® Processor type Two or four Quad-Core Intel Xeon processor 7300 series Expansion Bus Bus type PCI Express Expansion slots Four x8 and three x4 Memory Architecture PC2-5200 667 MHz fully-buffered DIMMs with ECC protection and two-way lockstep operation Memory module sockets Thirty-two 240-pin Memory module capacities 512 MB, 1 GB, 2 GB, 4 GB Minimum RAM 2 GB Maximum RAM 128 GB Drives SAS hard drives Up to five 3.5-inch, internal, hot-plug, (optional) wit
Summary of the content on the page No. 14
Connectors Back NIC Four RJ-45 (for integrated 1-GB NICs) Serial 9-pin, DTE, 16550-compatible USB Two 4 pin, USB 2.0 compliant Video 15-pin VGA Front Video 15-pin VGA USB Two 4 pin, USB 2.0 compliant Video Video type ATI ES1000 video controller; VGA connector Video memory 16 MB of DDR SDRAM Power AC power supply (per power supply) Wattage (output) 1570W (200/240 VAC input) 1030W (100/127 VAC input) Voltage (input) 90 - 140 VAC @ 47 - 63 HZ 180 - 264 VAC @ 47 - 63 HZ Maximum power dissipation 35
Summary of the content on the page No. 15
Physical Rack Height 6.8 inches (173 mm) Width 17.6 inches (447 mm) Depth 27.8 inches (706 mm) Weight (maximum configuration) 90 lbs (40 kg) Environmental NOTE: For additional information about environmental measurements for specific system configurations, see www.dell.com/environmental_datasheets. Temperature Operating 10 to 35°C (50 to 95°F) Storage -40 to 65°C (-40 to 149°F) Relative humidity Operating 20% to 80% Storage 5% to 95% Random vibration Operating 0.26 Grms Storage 1.54 Grms Half
Summary of the content on the page No. 16
14 Getting Started With Your System
Summary of the content on the page No. 17
Systèmes Dell™ PowerEdge™ R900 Guide de mise en route
Summary of the content on the page No. 18
Remarques, avis et précautions REMARQUE : Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre ordinateur. AVIS : Un AVIS vous avertit d'un risque de dommage matériel ou de perte de données et vous indique comment éviter le problème. PRÉCAUTION : Une PRÉCAUTION indique un risque potentiel d'endommagement du matériel, de blessure corporelle ou de mort. Les informations contenues dans ce document peuvent être modifiées sans préavis. © 2007 Dell Inc.
Summary of the content on the page No. 19
Caractéristiques du système Les principales caractéristiques du système sur le plan matériel et logiciel sont les suivantes : ® ® Deux ou quatre processeurs Intel Xeon quadruple cœur de la série 7300. Prise en charge du SMP (Symmetric Multiprocessing [Multi-traitement symétrique]), disponible sur les systèmes dotés de deux ou quatre microprocesseurs Intel Xeon. Le SMP améliore considérablement les performances du système en partageant les tâches entre des microprocesseurs indépendants.
Summary of the content on the page No. 20
Carte de montage d'E/S avec quatre logements pour NIC Ethernet Gigabit prenant en charge des débits de 10, 100 et 1000 Mbps. Logement PCI dédié pour contrôleur RAID intégré avec mémoire cache de 256 Mo et batterie RAID. REMARQUE : Le démarrage du système à partir d'un périphérique externe connecté à une carte SAS ou SCSI n'est pas pris en charge (cartes SAS 5/E et PERC 5/E incluses). Rendez-vous sur le site support.dell.com pour obtenir les informations les plus récentes concernant le
