IBM 6E1 user manual

User manual for the device IBM 6E1

Device: IBM 6E1
Size: 1,09 MB
Date of adding : 2014-11-10 14:27:35
Number of pages: n/a
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for IBM 6E1. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with IBM 6E1.

For your convenience

If looking through the IBM 6E1 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualIBM 6E1 on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual IBM 6E1 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
IBM 6E1 user manual
Advertisement
« Page 1 of n/a »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual IBM 6E1 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to IBM 6E1. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1



Front cover
IBM
pSeries 610 Models 6C1 and 6E1
Technical Overview and Introduction
Integrated light path diagnostics
Two unique models: deskside or
rack mount
Integrated storage options
Volker Haug
Scott Vetter
ibm.com/redbooks

Summary of the content on the page No. 2

Summary of the content on the page No. 3

International Technical Support Organization pSeries 610 Models 6C1 and 6E1 Technical Overview and Introduction October 2001

Summary of the content on the page No. 4

Take Note! Before using this information and the product it supports, be sure to read the general information in “Special notices” on page 27. First Edition (October 2001) This edition applies to the IBM ^ ™ pSeries™ 610 Models 6C1 and 6E1. Related software offerings include AIX® Version 4.3, product number 5754-C34, AIX 5L™ Version 5.1, product number 5765-E61, and all subsequent releases. Comments may be addressed to: IBM Corporation, International Technical Support Organization Dept. JN9B

Summary of the content on the page No. 5

Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v The team that wrote this Whitepaper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v Comments welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of the content on the page No. 6

Special notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 IBM trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 System Publications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of the content on the page No. 7

Preface This document provides a comprehensive single-source guide covering IBM® ^ ™ pSeries™ 610 Models 6C1 and 6E1 entry servers. Major hardware offerings are introduced and their prominent functions discussed. Professionals wishing to acquire a better understanding of IBM ^ pSeries products may consider reading this document. The intended audience includes:  Customers  Sales and marketing professionals  Technical support professionals  IBM Business Partners This document expands the cu

Summary of the content on the page No. 8

Dale Dagitz IBM Austin Tesshu Flower IBM Canada John Hilburn IBM Austin Tenley Jackson IBM Dallas Stephen Lutz IBM Germany Paul Maybaum IBM Austin Bill Mihaltse IBM Somers Mace Miller IBM Austin Thoi Nguyen IBM Austin Jan Palmer IBM Austin Richard Talbot IBM Austin Ven Tenjarla IBM Austin Susan Tiner IBM Austin Roger Weekly IBM Austin Comments welcome Your comments are important to us! We want our Whitepapers to be as helpful as possible. Send us your comments about this Whitepaper or other Red

Summary of the content on the page No. 9

1 Chapter 1. General description The IBM® ^™ pSeries™ 610 Models 6C1 and 6E1 (referred to hereafter as the Model 6C1 and Model 6E1) are members of the 64-bit family of symmetric multiprocessing (SMP) UNIX servers from IBM and use state-of-the-art, 64-bit, copper-based, POWER3-II microprocessors. The Model 6C1 (product number 7028-6C1) is a rack-mounted server, the Model 6E1 (7028-6E1) is a tower server. Both models, manufactured in Rochester, Minnesota, USA and Dublin, Ireland, give you new

Summary of the content on the page No. 10

for keyboard, mouse, one parallel, and three serial. Only the rack-mounted Model 6C1 has serial port one accessible from an RJ48 connection on front as well as the standard 9 pin port on the rear of the system. When one port is used, the other is disabled. The serial port 1, accessible on front, has a higher priority than serial port 1 on the rear. Note: If you want to attach a 25-pin serial cable, you need to order the Serial Port Converter Cable, 9-Pin to 25-Pin (# 3925). This is not shipp

Summary of the content on the page No. 11

The Models 6C1 and 6E1 are the first IBM UNIX servers that contain built-in Light Path Diagnostics. This technology provides LEDs physically located on key system components, assisting in quick diagnosis and resolution of problems, should they arise. Please refer to “Light Path diagnostics” on page 21 to get detailed information. 1.2 Physical package Figure 1-1 on page 3 shows the package layout for the Model 6C1, and Figure 1-2 on page 4 shows the same for the Model 6E1. Figure 1-1 pSeri

Summary of the content on the page No. 12

Figure 1-2 pSeries 610 Model 6E1 - package layout 1.3 Enterprise racks The following description provides an overview of racks available from IBM in which the Model 6C1 can be mounted. At the time of writing, no feature is available to convert a tower model to a rack mount model. Check with your IBM representative to determine the availability of this feature. The Enterprise Rack Models T00 and T42 are 19-inch wide racks for general use with pSeries and RS/6000 rack-based or rack drawer b

Summary of the content on the page No. 13

Note: You can get the latest available IBM ^ pSeries Specifications For Installations in A Non-pSeries Rack or Cabinet document from this IBM internal location: http://wwas.raleigh.ibm.com/safety/racks.pdf 1.3.1 IBM RS/6000 7014 Model T00 Enterprise Rack The 1.8 m (71 inches) Model T00 is compatible with past and present pSeries and RS/6000 racks, and is designed for use in all situations that have previously used the older rack models R00 and S00. The T00 rack has the following features: 

Summary of the content on the page No. 14

you need to remove the server from the rack at a later time. If you are not able to find them at a later time, you will need to order two of part number 09N7997. A Model 6C1 is 5 U in height, so a maximum of seven Model 6C1s fit in a T00 rack, or you can put eight Model 6C1s in a T42 rack. Each Model 6C1 is shipped with a rack mounting template, which helps you to easily place the cage nuts in the correct position in a rack. 1.3.4 IBM 7316-TF1 Flat Panel Display Console For rack-mounted syst

Summary of the content on the page No. 15

1.3.6 Cable management arm The Model 6C1 is shipped by default with a cable management arm. You can route all cables through the cable management arm, attaching the cables to the arm with the hook and loop fastener strips provided. The wraps are provided for additional cable management. Figure 1-3 shows the cable management arm. As the drawer is moved on its rails into the service position, the arms expand or collapse, actively managing the cables. A cable retention clip located on the rear

Summary of the content on the page No. 16

8 pSeries 610 Models 6C1 and 6E1 Technical Overview and Introduction

Summary of the content on the page No. 17

2 Chapter 2. Architecture and technical overview The following sections provide more detailed information about the architecture of the Models 6C1 and 6E1. Figure 2-1 shows the high level system block diagram of both models. Processor Card Processor Card 4MB L2 4MBL2 w/ 375 MHz w/ 375 MHz POWER3-II POWER3-II 250 MHz 250 MHz w/ 375 MHz w/ 375 MHz 375 MHz 375 MHz 225 MHz 225 MHz or or w/ 450 MHz w/ 450 MHz 450 MHz 450 MHz 8MB L2 8MBL2 w/ 450 MHz w/ 450 MHz 16 Bytes @ 93.75 MHz w/ 375 MHz 6xx Dat

Summary of the content on the page No. 18

2.1 Processor and cache The IBM® ^ ™ pSeries™ 610 Models 6C1 and 6E1 have two processor card slots and can accommodate two different processor cards, a 1-way 375 MHz or a 1-way 450 MHz. Note that slot 1 must have a processor card installed for normal operation. If your system unit uses two processor cards, both processor cards must be of the same clock speed. Note: Installing a processor card into your system unit may require updating the firmware. A diskette or CD-ROM is included with your

Summary of the content on the page No. 19

2.1.3 Copper and CMOS technology Copper is a superior conductor of electricity, making it possible to shrink electronic devices even further while increasing performance. It has less resistance than aluminum and, therefore, allows designs that transmit electrical signals faster. However, it does not mix as well with silicon, the base material of semiconductor chips. IBM researchers found a way to put a microscopic barrier between the copper and silicon in a way that actually reduced the nu

Summary of the content on the page No. 20

# sar -P ALL 2 AIX volker@colt 3 4 000AAFDD4C00 09/18/01 07:30:44 cpu %usr %sys %wio %idle 07:30:46 0 0 00100 1 0 00100 -0 00100 In the previous example, two configured processors are shown in the cpu column.  lsattr command. The AIX 5L™ Version 5.1 is output shown: # lsattr -E -l proc0 state enable Processor state False type PowerPC_POWER3 Processor type False frequency 375000000 Processor Speed False state enable means that processor 0 is enabled. # lsattr -E -l proc1 state disabled Processor


Similar user manuals
# User manual Category Download
1 IBM 440 Server 29
2 IBM 6.00E+01 Server 38
3 IBM 325 Server 33
4 IBM 610 Server 11
5 IBM 47AE - 410168 Server 34