Summary of the content on the page No. 1
SYMBOL
OWNER’S MANUAL
DESIGNED BY NEIL PATEL FOR AVALON ACOUSTICS
This product is certified to meet the requirements of the European Union (EU)
Electromagnetic Compatibility (EMC) Directive (89/336/EEC). Because the permanent
magnets attached to the loudspeaker drivers produce magnetic fields, it is
recommended that the product not be positioned in very close proximity to computer
monitors or television sets.
Summary of the content on the page No. 2
Table of Contents 1 Introduction ............................................................................................................................. 3 2 Unpacking Instructions .......................................................................................................... 4 Introduction ........................................................................................................... 4 Contents ................................................................
Summary of the content on the page No. 3
1 Introduction The Avalon MultiChannel System SYMBOL reflects our passion for creating loudspeakers that capture the imagination, and accurately reproduce the three-dimensional space of modern film soundtracks as well as discreet multi-channel musical recordings. Drawing upon our many years of experience in loudspeaker research, design, listening, and manufacturing, and combining the most powerful tools of modern technology with master craftsmanship of the finest artisans, we have cre
Summary of the content on the page No. 4
2 Unpacking Instructions Introduction Your Avalon MultiChannel Systems loudspeakers were shipped in heavily padded cardboard containers to ensure their safe arrival. It is recommended to save these containers for possible future use. Contents The outer shipping box contains the two inner loudspeaker containers and an accessory box containing the upper grille assemblies, the owner's manual, and the mounting feet with spikes and hardware. Avalon MultiChannel Systems loudspeakers are c
Summary of the content on the page No. 5
Opening the Loudspeaker Containers Carefully cut the packing tape on the BOTTOM ONLY, open the flaps to the container and stand upright. Lift the container off of the loudspeakers vertically; the speakers stand upon protective foam padding. Next, gently lay the speaker upon a soft cloth or towel. Install the mounting feet in this position. It is recommended to wait before installing the spikes in the feet, as they can make final placement difficult and can damage your floor. Please re
Summary of the content on the page No. 6
Installing the Upper Grilles The upper grille assemblies are contained within the accessory box (the lower grilles are shipped in their installed positions). The grilles are installed with friction fasteners and press into place on the speaker cabinets. Orientation of the Felt Anti-Diffraction Mask The grille assembly includes a felt anti-diffraction mask. Should the felt mask be removed, be sure to note the correct inside-outside orientation when re-installing it. The tweeter and midr
Summary of the content on the page No. 7
3 Wiring Instructions Introduction The crossover is contained in a non-accessible chamber in the bottom of the speaker cabinet. The SYMBOL is equipped with high-quality barrier terminals for connecting the speaker cables. Ring terminals or spade lugs designed for #10 screws are recommended for cable termination. Connecting the Speaker to the Amplifier 1. Place the speaker in its approximate location, then lay the speaker on its side, using a soft surface to avoid scratching the finish.
Summary of the content on the page No. 8
4 Break-in Period Your new Avalon MultiChannel Systems loudspeakers have an initial break-in period. They will not perform to their full sonic potential when first installed in your system. This is partially due to a residual polarization of the dielectric materials used in the crossover 1 capacitors and internal wiring. As music is played through the loudspeakers, the electrical signal will gradually anneal these materials. Similarly, the suspensions of the drivers will reach their op
Summary of the content on the page No. 9
5 Maximizing Two Channel Performance These details are imperative to obtaining optimum results from your AVALON MUTLICHANNEL SYSTEMS loudspeakers. Break-in The break-in period is critical to maximizing sonic performance and should take place before other adjustments (see the discussion on page 8). The break-in should begin with three to six hours of quiet music, followed by 100 to 150 hours of loud and dynamic source material. Grille Assemblies The grille assemblies, with their
Summary of the content on the page No. 10
Toe-In Adjusting the toe-in angle of the speakers is useful in tailoring the sound to best match the characteristics of your system and listening room. When the speakers are facing straight forward, they tend to create a large, expansive sound-stage, painted with broad brush strokes. As they are rotated toward the listening position, the image becomes more compact, with increased focus, creating a greater sense of intimacy. Start with the loudspeakers facing straight forward, and play e
Summary of the content on the page No. 11
6 Care of Your Loudspeakers Cabinet (Hardwood Finish) Avalon MultiChannel Systems’ hardwood finished loudspeakers are supplied with a durable, high quality furniture lacquer. Always use a clean, lint-free cloth to clean your cabinet, and be especially careful near the loudspeaker drivers, so as not to damage the diaphragms. IMPORTANT: DO NOT use cleaners that contain ammonia, strong solvents, or abrasive materials. Use of these materials can degrade, scratch, or even DESTROY the
Summary of the content on the page No. 12
7 Warranty Your Avalon MultiChannel Systems SYMBOL SERIES loudspeakers are warranted against defects in workmanship and materials for a period of two years from the date of first purchase to the original registered purchaser, provided that the enclosed registration card is returned to the factory within seven days of the purchase date. If the registration card is not returned within the seven-day period, this warranty is null and void, and you will not be notified of future updates. If
Summary of the content on the page No. 13
3. Avalon MultiChannel Systems reserves the right to inspect any products which are the subject of warranty claim prior to repair or replacement. Final determination of warranty coverage lies solely with Avalon MultiChannel Systems and only products which are determined to be covered under this warranty shall be repaired or replaced by Avalon MultiChannel Systems. The customer will be informed of any delays and Avalon MultiChannel Systems will provide replacement as quickly as possible.
Summary of the content on the page No. 14
10 Features Advanced light weight driver diaphragm materials minimize energy storage and time-domain distortion. Smooth, wide polar response for superlative imaging capabilities. Moderate impedance characteristic allows for ideal interface with any amplifier. Crossover circuitry is hard-wired with surface-only conductors, eliminating deleterious sonic effects of printed-circuit boards. Oversize screw terminals. Careful crossover control of all magnetic field interaction.
Summary of the content on the page No. 15
11 Specifications Driver Complement (1) 1" Proprietary Composite Tweeter (2) 5.25" Ceramic-coated Woofer Sensitivity 87 dB Impedance 5 Ohms Nominal Frequency Response 45Hz to 24kHz Recommended Amplifier Power 30 to 150 Watts Wiring Methods Two position terminal block, designed to accept spade lugs for #10 screws Dimensions 42" High (109 cm) 8" Wide (13 cm) 9" Deep (23 cm) Weight 36 Pounds Each (16.4 kg each) 15
Summary of the content on the page No. 16
12 Notes 16
