Calumet TRAVELITE 750 user manual

Summary of the content on the page No. 1

Retail Locations
New York, NY 10011
16 W. 19th St.
212-989-8500
Cambridge, MA 02141
65 Bent St.
617-576-2600
USER GUIDE
Philadelphia, PA 19147
1400 S. Columbus Blvd.
215-399-2155
Bensenville, IL 60106
890 Supreme Dr.
630-860-7458
Chicago, IL 60622
1111 N. Cherry Ave.
312-440-4920
San Francisco, CA 94110
2001 Bryant St.
415-643-9275
Santa Barbara, CA 93101
228 E. Cota St.
805-965-7053
Santa Ana, CA 92705
1430 S. Village Way, Suite A
714-285-0143
San Diego, CA 92025
830 W. Valley

Summary of the content on the page No. 2

Table of Contents Introduction Dear Valued Customer, Description Page Introduction & Safety Notes 3 Thank you for choosing the Calumet Travelite professional flash system. Accurate, ergonomic, powerful and simple to use, the Travelite was designed by working closely with photographers Control Panel Guide 4 to develop a flash that meets the high standards demanded in professional studios today. All ‘S-Type’ accessories from the Calumet/Bowens range can be used with the Travelite. For Connectin

Summary of the content on the page No. 3

Control Panel Guide Connecting and Using Your Travelite Rear Control Panel Operating Your Travelite Carry handle The Calumet Travelite may be operated either on an AC supply or with a Calumet Travel-Pak For AC operation, the AC switch (page 4) should be in the upper position I. For battery operation the switch should be in the lower position II. The center position is off. AC / Battery NOTE: When operated from a battery source, the modeling functions are not available. Photocell On/Off Powe

Summary of the content on the page No. 4

Flash Power Control Changing the Modeling Lamp The flash-power output level is variable over 5-stops, from full to 1/32 power. The maximum power Switch off Travelite and disconnect from the power supply. Screw modeling lamp into ES lampholder in the available depends upon the model (See specification table) and is denoted by the number 6 on the control center of the reflector. Allow lamp to cool before removing. panel. The power settings are denoted in 1⁄3-stops. The numeric divisions indicat

Summary of the content on the page No. 5

Accessories Accessories LiteLink Radio Trigger System Reflectors Calumet’s light-control reflectors are built to withstand many years of rigorous, daily use. They feature LiteLink Radio Trigger System extremely strong housing and steel bayonet-type mounts for quick, positive mounting. The inner steel With the Travelite you are free from AC power cables. ring provides additional durability for frequent reflector changes. From studio sets to location sites, Calumet’s comprehensive system of ac

Summary of the content on the page No. 6

Specifications Travelite Specifications Comparison Chart Unit Travelite 375 Travelite 750 Maximum Stored Energy 375w/s 750w/s Sync Voltage 5V 5V Flash Color Temperature 5600 K ±300 K 5600 K ±300 K Circuit Protection 115V - 10A (T) 115V - 10A (T) Supply Voltage 95-130V AC 60Hz 95-130V AC 60 Hz Voltage Stabilization ±1% ±1% Guide Number 220 350 (Full Power, 50° Keylite, ISO 100) Typical Recycle Time (Full Power) 1.7 sec. 2.1 sec. Modeling Power Control Full / Intermittant / Off Full / Intermitta