Summary of the content on the page No. 1
For product support, visit
www.hd.philips.com
HTL5120
User manual
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact
Philips Customer Care Center at 1-866-310-0744
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989;
Mexico City: 58 87 97 36
For Product recycling information, please visit - www.recycle.philips.com
P&F USA, Inc.
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents 1 Important 2 Important safety instructions 2 Care for your product 3 Care of the environment 3 Help and support 4 2 Your SoundBar 5 Main unit 5 Remote control 5 Connectors 7 3 Connect 8 Connect to TV 8 Connect digital devices through HDMI 8 Connect audio from TV and other devices 9 4 Use your SoundBar 10 Adjust the volume 10 Choose your sound 10 MP3 player 11 Play audio through Bluetooth 11 Auto standby 12 Apply factory settings 12 5 Wall mount
Summary of the content on the page No. 4
1 Important Read and understand all instructions before you • Use only with the cart, stand, tripod, use your product. If damage is caused by failure bracket or table specified by the to follow instructions, the warranty does not manufacturer or sold with the apparatus. apply. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning Important safety instructions storm or when unused for long pe
Summary of the content on the page No. 5
• If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. • When you change the batteries, always keep all new and used batteries out of This 'bolt of lightning' indicates uninsulated reach of children. Ensure that the battery material within your unit may cause an electrical compartment is completely secure after shock. For the safety of everyone in your you replace the battery. household, please do not remove product
Summary of the content on the page No. 6
electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations. For perchlorate material, special handling may apply. Visit www.dtsc.ca.gov/hazard
Summary of the content on the page No. 7
• OPTICAL: Lights up when you switch 2 Your SoundBar to optical input source. • AUX/Bluetooth: Lights up when you switch to analog input source. Blinks Congratulations on your purchase, and when you switch to Bluetooth mode. welcome to Philips! To fully benefit from • COAXIAL: Lights up when you switch the support that Philips offers, register your to coaxial input source. SoundBar at www.philips.com/welcome. c Volume indicator/V. SURR indicator • When you change volume, volume indicat
Summary of the content on the page No. 8
Switch your audio source to the coaxial connection. 1 f MUSIC iLINK 2 Switch your audio source to the MUSIC 17 3 iLINK connection. 4 g AUTO VOLUME ON/OFF Turn auto volume or or off. 16 Bluetooth 5 h AUDIO SYNC +/- 15 Increase or decrease audio delay. 6 i +/- (Volume) Increase or decrease volume. 7 14 j TREBLE +/- Increase or decrease treble. 8 13 k BASS +/- 9 Increase or decrease bass. 10 l V.SURR Toggle between stereo and virtual 11 surround sound. m (Mute) 12 Mute or restore volume. n NIG
Summary of the content on the page No. 9
e AUDIO IN-AUX Connectors Connect to an analog audio output on the TV or an analog device. This section includes an overview of the f DIGITAL IN-COAXIAL connectors available on your SoundBar. Connect to a coaxial audio output on the TV or a digital device. Rear connectors g DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. a MUSIC iLINK Audio input from an MP3 player. Bottom connectors g 6 1 5 2 4 3 a HDMI IN 1 Connect to the HDMI output on a d
Summary of the content on the page No. 10
• The HDMI ARC connector on the TV 3 Connect might be labeled differently. For details, see the TV user manual. 2 On your TV, turn on HDMI-CEC This section helps you connect your SoundBar operations. For details, see the TV user to a TV and other devices. manual. For information about the basic connections of your SoundBar and accessories, see the quick Note start guide. • If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through your Note SoundBar. (s
Summary of the content on the page No. 11
1 Using a coaxial cable, connect the Connect audio from TV and COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT other devices connector on the TV or other device. • The digital coaxial connector might be Play audio from TV or other devices through labeled DIGITAL AUDIO OUT. your Soundbar speakers. Use the best quality connection available on your TV, Soundbar, and other devices. Option 3: Connect audio through analog audio cables Note Basic quality audio • When your Sound
Summary of the content on the page No. 12
Surround sound mode 4 Use your Experience an immersive audio experience with SoundBar surround sound modes. 1 Press V.SURR repeatedly to switch surround mode on or off. This section helps you use the SoundBar to play » When surround mode is on, the audio from connected devices. V.SURR indicator on the main unit lights up. Creates a surround listening Before you start experience. • Make the necessary connections described in the quick start guide and the user » When the V.SURR indicator
Summary of the content on the page No. 13
• The operational range between the Night mode SoundBar and a Bluetooth device is approximately 10 meters (30 feet). For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is 1 Press Bluetooth on the remote control to only available for Dolby Digital soundtracks. switch the SoundBar to Bluetooth mode. 1 Press NIGHT MODE ON/OFF to turn » The AUX/Bluetooth indicator blinks at night mode on or off. a fast rate. » When night mode is turned on or off, 2 On th
Summary of the content on the page No. 14
Auto standby When playing media from a connected device, the SoundBar automatically switches to standby if: • no source button is pressed for 30 minutes, and • no audio/video playback is detected from a connected device. Apply factory settings You can reset your SoundBar to the default settings programmed at the factory. 1 Press TREBLE+, VOL-, and BASS+ within three seconds. » When the factory settings restore is complete, the SoundBar automatically switches off and restarts. 12 EN
Summary of the content on the page No. 15
5 Wall mount your SoundBar Before you mount your SoundBar on the wall, read all safety precautions. Wall mount Note • Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. • Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. • Before wall mount, you need not remove the four rubber feet at th
Summary of the content on the page No. 16
• Speaker impedance: 6 Product • Woofer: 3 ohm • tweeter: 12 ohm specifications • Speaker drivers: 2 x 102 mm (4") woofer + 2 x 25.4 mm (1") tweeter • Dimensions (WxHxD): 1010 x 81 x 154 mm • Weight: 3.9 kg Note • Specifications and design are subject to change without Wall mount notice. • Dimensions (WxHxD): 40 x 100 x 26.5 mm • Weight: 0.1 kg/each Amplifier • FTC total output power: 42W Remote control batteries • Woofer L + Woofer R: 32W ( 1% THD, 3ohm, 180Hz-6KHz ) • 2 x AAA-R03-1.5 V
Summary of the content on the page No. 17
Bluetooth 7 Troubleshooting A device cannot connect with the SoundBar. • The device does not support the compatible profiles required for the Warning SoundBar. • You have not enabled the Bluetooth • Risk of electric shock. Never remove the casing of the product. function of the device. See the user manual of the device on how to enable the function. To keep the warranty valid, never try to repair • The device is not correctly connected. the product yourself. Connect the device correctly
Summary of the content on the page No. 18
FCC Radiation Exposure Statement:This 8 Notice equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed This section contains the legal and trademark and operated with a minimum distance of notices. 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Notice of compliance Warning: Changes or modifications made to this e
Summary of the content on the page No. 19
® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. EN 17
Summary of the content on the page No. 20
ONE (1) YEAR LIMITED WARRANTY WARRANTY COVERAGE: or (d) if any serial number has been removed or defaced, This warranty obligation is limited to the terms set forth or (e) product, accessories or consumables sold “AS IS” below. without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers. WHO IS COVERED: This product is warranted to the original purchaser or the per- This Limited Warranty does not cover: son receiving the product as a gift against defect
