Tannoy VXPSERIES user manual

Summary of the content on the page No. 1

VXP SERIES
Professional loudspeakers
Quick Start Guide

Summary of the content on the page No. 2

Introduction Designed and engineered in a unique partnership between Tannoy and Lab.gruppen, the VXP Series comprises a range of powered (active) loudspeakers for demanding professional and commercial sound applications. Each incorporates acclaimed Dual Concentric driver technology in tandem with on-board powering by Lab.gruppen’s IDEEA™ (IntelliDrive Energy Efficient Amplifier) module. This Quick Start Guide presents only the essential information required to properly unpack, connect and pla

Summary of the content on the page No. 3

Unpacking and Visual Checks AC Power Requirements Every Tannoy VXP product is carefully tested and inspected before VXP products are equipped with Neutrik powerCON mains being packaged and leaving the factory. After unpacking your connectors which mate with the Neutrik NAC3FCA Cable loudspeaker, please inspect for any exterior physical damage, connector, providing quick lock with a securing lever at power-in. and save the carton and any relevant packaging materials in case This AC mains conne

Summary of the content on the page No. 4

6481 0594 / 0911 LED Functions Gain Structure and Limiting Limit LED - When illuminated this indicates that the system is The VXP gain structure is designed to allow a low-level source device approaching clipping. An occasional flicker of the red LED on the to drive the loudspeaker to full output. Maximum specified SPL will loudest peaks is acceptable. If this LED remains red for more than be achieved with a 4 dBu input signal. There is sufficient headroom the duration of brief dynamic peaks,