Summary of the content on the page No. 1
Summary of the content on the page No. 2
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important safety instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
Summary of the content on the page No. 3
Thank you. And congratulations! 2) Stand mounting: This is your second option and it’s an attractive one for many owners. If you’re placing your TSC bookshelf Our thanks for buying your new speakers from TSC. We sincerely speakers on stands, you can use a material like Blu Tack®, a appreciate your confidence in us and our products. moldable, reusable adhesive compound, to keep your speakers firmly (but not permanently) attached to the stands. If you can’t Please read this Owner’s Ma
Summary of the content on the page No. 4
– your seated ear level are ideal. (This may pose a challenge if you Make sure that the speakertolistening/viewing position distance is the have to place your Center Channel speaker either above or below your same for each speaker. TV screen but you shouldn’t worry too much.) Some professionals recommend placing the main (Left and Right) Try to place the center channel speaker at exactly the same distance speakers so that they form an equilateral triangle with the prime from your list
Summary of the content on the page No. 5
If you’re a movie fan, mount the surround speakers on the side · If that still doesn’t please you, then move the subwoofer further out walls flanking your primary listening/viewing position. Make sure into the room. You’ll have less overall “boom” but probably higher they’re slightly behind your couch or chair and at least 1.5 to 2’ above overall sound quality. ear level. Once you’ve decided on general placement, there’s another technique that will help you finetune your subwoofer’s i
Summary of the content on the page No. 6
Next, connect your other speakers (Left, Center, Right, Left Surround, and Right Surround) directly to your receiver. Note that your receiver’s speaker connections are paired. One terminals in each pair is red (positive or “+”), the other black (negative or ““). You’ll notice a pair of springloaded terminals on each speaker. They are also red and black, respectively. Prepare the wire by exposing about 3/8” of each conductor by removing Speaker wire, in turn, has two conductors separa
Summary of the content on the page No. 7
the wire into that hole. Release the tab to complete the Then connect your main Left and Right speakers to the subwoofer’s “To connection. Speakers” outputs. 5) Connect the ““ conductor to the ““ speaker terminal. Then follow steps 1 through 5 for all other amplifierspeaker connections in your system. Maintain the same pattern for all amplifierspeaker connections! Why are we placing as much emphasis on consistency here? We want you to get all the performance you’ve paid for! No
Summary of the content on the page No. 8
Adjusting Your Subwoofer BreakIn Once everything is hooked up properly, you’re ready to “fine tune” your Many people believe speakers improve with age. system to your preferences. With TSC speakers, you’ll notice a change in timbre, responsiveness, The following suggestions will give you a good start. Remember that and sheer musicality as you use them because the drivers “settle in” they are suggestions only. You may choose to vary the control settings with use. to suit your room an
