Summary of the content on the page No. 1
®
Emerge DA1200D
1 X 2 DVI Distribution Amplifier
Installer/User Guide
Avocent, the Avocent logo and Emerge are registered trademarks of Avocent Corporation.
All other marks are the property of their respective owners.
© 2008 Avocent Corporation. All rights reserved. 590-831-501A
Summary of the content on the page No. 2
Table of Contents 1 INTRODUCTION ...................................................................................................... 3 2 SPECIFICATIONS ................................................................................................... 4 3 CHECKING PACKAGE CONTENTS ....................................................................... 5 4 CONNECTING THE HARDWARE ........................................................................... 5 5 OPERATING THE UNIT
Summary of the content on the page No. 3
1 INTRODUCTION Thanks for purchasing the DA1200D HDCP compliant DVI distribution amplifier from Avocent. The DA1200D amplifier is designed to allow the distribution of a single DVI HDCP compliant input to two DVI HDCP compliant devices. 1.1 Features The following is brief overview the DA1200D amplifier feature set: • One DVI HDCP-compliant signal can be distributed to two compliant display devices. • Support for HDCP • Support for computer resolutions up to 1920x1200 and HDTV r
Summary of the content on the page No. 4
2 SPECIFICATIONS Performance HDTV Resolutions Supported 480i, 480p, 720p, 1080i Maximum Display Refresh Rate 165MHz (UXGA) Supported Maximum Resolution 1920x1200@60Hz Maximum Cable Distance (Outputs) 32 feet (10M) Using Premium Cable I/O Connectors DVI Destination Port Connectors 2x DVI-I 29 pin female Input Port Connector 1x DVI-I 29 pin female Mechanical Dimension (H-W-D) (1x2 version) 1.65”x6.0”x3.0” (42x153x75mm) Weight (1x2 version) 1.0 Pounds (475g) Dimension (H-W-D
Summary of the content on the page No. 5
3 CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: • 1x DA1200D DVI Distribution Amplifier • 1x AC Adapter • 1x Operations Manual Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or Avocent technical support immediately. Have the model number and serial number avail
Summary of the content on the page No. 6
5 OPERATING THE UNIT Before installation, please make sure all of devices have been turned off. • Connect a DVI-D HDCP compliant signal to the input connector using premium quality cable. * • Connect 2 DVI-D HDCP compliant devices to the amplifier’s outputs using premium quality cable. ** • Plug the DC power adapter into the rear of the unit. • Plug the power adapter into a working AC socket. • Power on all input and output devices. • The input signal should now be available to all
Summary of the content on the page No. 7
After trying the above suggestions should the problem still persist, contact your dealer for additional suggestions before contacting Avocent. Should the dealer’s technical personnel be unable to assist you, contact Avocent via our support website: http://www.avocent.com/support. Create a technical support request on the site and our support team will respond within a short period of time. 7 REGULATORY COMPLIANCE European ‘CE’ Mark Statement Emissions: EN 55022:1998+A1:2000+A2:2003
Summary of the content on the page No. 8
Where AV and IT Meet 590-831-501A
