Kenwood KAC-X11D user manual

Summary of the content on the page No. 1

KAC-X11D
CLASS D MONO POWER AMPLIFIER
INSTRUCTION MANUAL
© B64-4198-00/00 (MV)
KAC-X11D_M_1English.indd 1 08.10.21 3:57:08 PM

Summary of the content on the page No. 2

Safety precautions Cleaning the unit WARNING If the front panel gets dirty, turn off the power and wipe the panel with a dry To prevent injury or fire, take the following precautions: silicon cloth or soft cloth. • Mounting and wiring this product requires skills and experience. For safety’s CAUTION sake, leave the mounting and wiring work to professionals. • When extending the ignition, battery, or ground wires, make sure to use Do not w

Summary of the content on the page No. 3

286 mm 272 mm Installation Accessories Part name External View Number of Items 380 mm 320 mm Self-tapping screws 4 ø6 (ø5 × 18 mm) Hexagon Wrench (Large) 1 Hexagon Wrench(Small) 1 Terminal cover (Powert erminal) 1 Remote cable (6.0 m) 1 Remote controller 1 Mountingbrack et 1 Self-tappingscr ews 2 (ø2.6 × 12 mm) Hexagon socket Installation procedure headcap screw Hexagon Wrench Since there are largevar iety of settings and connections possible accordingt o (M4 × 8m

Summary of the content on the page No. 4

Connection WARNING Remove the ignition key and disconnect the negative · terminal of the battery to prevent short circuits. CENTERUNIT RCA cable* (CD receiver,et c.) Powercontr ol wire* Left input CAUTION • If sound is not output normally, immediately turn power off and check connections. • Be sure to turn the power off before changing BATT. GND Hexagon Wrench L REMOTE the setting of any switch. (Small) R • If the fuse blows, check wires for sho

Summary of the content on the page No. 5

■ Remote cable connection Remote cable (6.0 m :19.7 ft) CAUTION • Before connecting the remote controller cables, always turn the Bass boost level knob all the way to the left. BATT. GND L REMOTE R FUSE [30Ax3] P.CON SPEAKER OUTPUT LINE IN LINE OUT Remotecontr oller Remotecable ■ Multi Amplifier with Remote cable connection You cancontr ol the Bass boost level of the LINE OUT 1 Remotecontr oller FILTER second and subsequentSla ve amplifiers 2 ON CENTERUNIT

Summary of the content on the page No. 6

Controls 30 150 25 1 100 2 35 0.5 20 70 3 0.3 4 50 200 15 40 [MIN] 5 0.2 [MAX] LPF ISF INPUT [ ] [ ] [ ] FREQUENCY Hz FREQUENCY Hz SENSITIVITY V LINE OUT FILTER ON OFF NOTE The control panel locates under the front side cover. Remove the cover to access to its controls for Remote controller adjustment. (See page 3) THERMAL MANAGEMENT PROTECTION BATT. GND L REMOTE R FUSE [30Ax3] P.CON SPEAKER OUTPUT LINE IN LINE OUT 1 Fuse (0 A × ) @ LPF(Low-Pass Filter) F

Summary of the content on the page No. 7

Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION No sound. • Input (or output) cables are disconnected. • Connectthe input ( oroutput) cables . • Protectioncir cuit maybe ac tivated. • Check connectionsb yr eferringt o

. (Blown fuse.) • Volume ist oo h

Summary of the content on the page No. 8

KAC-X11D_M_1English.indd 8 08.10.21 3:57:17 PM