Summary of the content on the page No. 1
Lens Controller
Model No. AW-LK30
Before attempting to connect or operate this product,
please read these instructions completely
and save this manual for future use.
Summary of the content on the page No. 2
For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- CAUTION vide reasonable protection against harmful interference RISK OF ELECTRIC SHOCK when the equipment is operated in a commercial environ- DO NOT OPEN ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cau
Summary of the content on the page No. 3
CONTENTS WARNING/CAUTION FOR SAFETY .......................................................................................................................................... 4 PREFACE .................................................................................................................................................................................. 5 PRECAUTIONS ..........................................................................................................................
Summary of the content on the page No. 4
WARNING/CAUTION FOR SAFETY WARNING CAUTION • Refer all servicing to qualified personnel • Do not drop the product, do not expose it to strong To reduce the risk of electric shock, don't remove shock, or do not step on it, to prevent a fire and cover or back, unless you are a qualified personnel. injuries. Refer all mountings, connections, servicing to quali- fied service personnel. • No water or moisture inside • Do not install the product at a place full of moisture Do not let water or moisture
Summary of the content on the page No. 5
PREFACE The AW-LK30 is a lens controller for motor-driven lens- es that have a zoom/focus control cable (fitted with a 12-pin female connector). Connected to a lens control cable, it permits local control of lens zoom, focus, and iris. (Applicable lenses: Panasonic AW-S14XBMD, AW- LZ10MD6, AW-LZ14MD55, etc.) PRECAUTIONS • Power Off Before Plugging or Unplugging • Little Moisture and Dust Be sure to switch power off before plugging or Avoid using the unit at a humid and dusty place unplugging t
Summary of the content on the page No. 6
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ZOOM IRIS TELE WIDE L H SPEED CLOSE OPEN FOCUS AUTO NEAR FAR MANU L H q Zoom Speed Control [ZOOM SPEED L/H] e Zoom Control Wide Switch [ZOOM WIDE] To adjust lens zoom control speed. Turning it The lens zooms in the wide angle direction while clockwise increases speed. the switch is kept depressed. w Zoom Control Tele Switch [ZOOM TELE] r Focus Speed Control [FOCUS SPEED L/H] The lens zooms in the telescopic direction while the To adjust lens focus c
Summary of the content on the page No. 7
t Focus Control Near Switch [FOCUS NEAR] !0 Clamper The lens focus draws near while the switch is kept Use it to clamp the lens controller to the grip of a tri- depressed. pod, for example. y Focus Control Far Switch [FOCUS FAR] !1 Clamp Screw The lens focus moves far while the switch is kept Tighten this screw to fasten the lens controller to the depressed. grip of a tripod, for example. u Iris Auto/Manual Switch [IRIS AUTO/MANU] At AUTO, the iris is automatically controlled (ALC). At MANU, the
Summary of the content on the page No. 8
INSTALLATION Remote (zoom/focus control) cable Camera cable Zoom lens OPTION CARD VIDEO OUT I/F REMOTE MENU G/L IN ITEM/AWC YES/ABC + IRIS Camera NO/BAR – DC12V IN To Iris connector Tripod grip or the like ZOOM IRIS TELE WIDE L H SPEED CLOSE OPEN FOCUS AUTO NEAR FAR MANU L H -8-
Summary of the content on the page No. 9
SPECIFICATIONS Power supply: 12 V DC, 60 mA (supplied from lens) Lens control: Zoom: Speed, tele/wide Focus: Speed, near/far Iris: Auto/manual, open/close Connecting cable length: 190 cm Operating temperature range: –10°C to +45°C (14°F to +113°F) Humidity: 30% to 90% Dimensions: 90 (W) x 40 (H) x 70 (D) mm [3-17/32” x 1-9/16” x 2-3/4”] Weight: 400 g (0.9 lbs.) Finish: AV ivory paint (close to Munsell 7.9Y6.8/0.8) Weight and dimensions indicated are approximate. Specifications are subject to cha
Summary of the content on the page No. 10
STANDARD ACCESSORIES Clamper ........................................ 1 each, right and left Clamp screw ........................................................... 1 pc Mounting screw .................................................... 2 pcs -10-
Summary of the content on the page No. 11
PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024 (770) 338-6845 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WEST
