Summary of the content on the page No. 1
NX-F30[U]-frontcover.fm Page 1 Tuesday, April 21, 2009 11:12 AM
COMPACT COMPONENT SYSTEM
NX-F30
Consists of CA-NXF30,
SP-NXF30F and SP-NXF30W
INSTRUCTIONS
GVT0267-009A
[US,UA,UG,UW]
Summary of the content on the page No. 2
NX-F30[U]-gpage.fm Page 1 Monday, April 6, 2009 10:48 PM Warnings, cautions and others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION The F button in any position does not disconnect the mains line. Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect de
Summary of the content on the page No. 3
NX-F30[U]-gpage.fm Page 2 Monday, April 6, 2009 10:48 PM CAUTION — Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm or more. In addition, maintain the best possible air circulation. Front view of the
Summary of the content on the page No. 4
NX-F30[U].book Page 1 Tuesday, April 21, 2009 6:23 PM Table of contents Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. Introduction Playing back sources from external devices Part description .............................3 Using the remote control ..............4 Playing back sources from external Inserting the batteries into the remote control
Summary of the content on the page No. 5
NX-F30[U].book Page 2 Tuesday, April 21, 2009 6:23 PM Using the status bar and the menu Reference bar .................................................34 Playing back a specified part repeatedly (A- Notes on operations ....................58 B repeat playback)......................................36 Suitable locations for the main unit ...............58 Designating the time (Time search)..............36 Condensation................................................58 Changing the initial setti
Summary of the content on the page No. 6
NX-F30[U].book Page 3 Tuesday, April 21, 2009 6:23 PM Part description The numbers refer to the pages in which the parts are explained. Front view Refer to “Display window” below. 26, 27 12, 13, 42 16, 21, 22, STANDBY 19, 20 26–28, 49 lamp Remote control sensor 10, 12, 41 15, 19, 20 15, 19, 10, 15, 20, 12, 16, MIC 1 MIC 2 PHONES 20 26, 48 18–20 20 41 14, 25 Touch sensor panels * Rear view 8, 39, 42 7, 10 6 7, 10 60 8, 18 9, 18 HDMI 5 9 9 Cooling fan 8, 11, 33, 38, 39, 57 * The voltage se
Summary of the content on the page No. 7
NX-F30[U].book Page 4 Tuesday, April 21, 2009 6:23 PM Using the remote control 12, 26 12, 19 10, 12, 19–22, 26, 27, 30, 31, 47, 48 10, 12, 20, 21, 26, 50, 51 54–56 12, 16 12, 18 12, 18 53, 54 54 12, 17, 19, 21, 22, 27, 28, 30, 35, 36, 47, 49, 52–56 54–56 10, 12, 16, 18, 19, 21, 27, 29, 32, 33, 37, 41, 48, 53–56 30, 47, 50–52, 55, 56 48, 56 54, 55 50, 51, 53, 54 22, 28 22, 28 10, 11, 16–19, 21, 27, 28, 30, 32–37, 47–55 12, 13, 42, 54 34, 36 13 21, 27 16, 26, 27, 45, 56 10, 20, 26, 30, 36, 45,
Summary of the content on the page No. 8
NX-F30[U].book Page 5 Tuesday, April 21, 2009 6:23 PM Preparation Do not connect the power cable until all other connections have been made. Connecting the FM antenna FM antenna (supplied) Main unit (rear view) Stretch out the FM antenna to the best position for radio reception. When radio reception with the supplied FM antenna is poor, or when using a communal antenna Main unit (rear view) Antenna cable Communal (not supplied) antenna terminal or Outdoor FM antenna (not supplied) Conver
Summary of the content on the page No. 9
NX-F30[U].book Page 6 Tuesday, April 21, 2009 6:23 PM Connecting the speakers and subwoofer Connect the speakers to the main unit by connecting the colored connectors to the same color terminals on the rear of the main unit. Red White Main unit (rear view) Speaker cable Speaker cable Gray Blue Right speaker Left speaker Purple (rear view) (rear view) Subwoofer Speaker cable (rear view) CAUTION ■ IMPORTANT • The supplied speakers are manufactured • Improper speaker cable connection reduces t
Summary of the content on the page No. 10
NX-F30[U].book Page 7 Tuesday, April 21, 2009 6:23 PM Preparation (continued) Do not connect the power cable until all other connections have been made. Speaker layout Connecting a TV Main unit After connecting a TV, follow the instructions on Subwoofer page 10. Left speaker Right speaker Connecting a TV with the [VIDEO] terminal TV Main unit (rear view) To a video input terminal This system is designed to provide virtual surround sound by positioning the 3 speakers in front. (The set of
Summary of the content on the page No. 11
NX-F30[U].book Page 8 Tuesday, April 21, 2009 6:23 PM ■ IMPORTANT Connecting external digital • Connect the main unit directly to a TV (or a audio devices monitor) without routing through a video cassette recorder (VCR) or an HDD/DVD recorder. Otherwise picture distortion may occur Output MD player or during playback. (Routing the connection satellite receiver through a VCR or an HDD/DVD recorder, however, does not affect the audio quality.) To an optical digital output terminal VCR
Summary of the content on the page No. 12
NX-F30[U].book Page 9 Tuesday, April 21, 2009 6:23 PM Preparation (continued) Do not connect the power cable until all other connections have been made. Connecting external analog Selecting the voltage for audio devices your area (Only for countries/ areas other than Thailand) Output Analog audio Before connecting the power cable to an AC outlet, device you must set the correct voltage for your area. Slide the voltage selector on the main unit to the correct voltage for your area. • Conf
Summary of the content on the page No. 13
NX-F30[U].book Page 10 Tuesday, April 21, 2009 6:23 PM 1 Turn on the main unit. • Refer to “Turning on/off the main unit” on page 12. 2 Press [DVD 3] or [USB 3]. • When a disc is loaded or a USB device is connected, press 7 to stop playback. 3 Press [SCAN MODE]. • The current video signal type appears. Remote control Example: When “PAL.576I (Interlace)” is mode selector selected as the video signal 2/3 (cursor)/ ENTER 4 Press 2 or 3 (cursor) to select the video signal type suitable f
Summary of the content on the page No. 14
NX-F30[U].book Page 11 Tuesday, April 21, 2009 6:23 PM For the locations of the remote control buttons, refer to page 10. Preparation (continued) • When the TV is connected to the [HDMI MONITOR OUT] terminal, the video signal type can be selected as instructed below. - Select “AUTO” for normal usage. (the initial setting) - Select “PAL. 576P”, “PAL. 720P”, “PAL.1080I”, “PAL.1080P”, “NT. 480P”, “NT. 720P”, “NT.1080I” or “NT.1080P” as needed. (The selectable settings differ according
Summary of the content on the page No. 15
NX-F30[U].book Page 12 Tuesday, April 21, 2009 6:23 PM Basic operations Turning on/off the main unit Press [AUDIO F] (or [STANDBY F] on the main unit). • The power of the main unit turns on and the [STANDBY] lamp (button) on the main unit turns Number off. buttons • Press [AUDIOF] (or [STANDBYF] on the Remote control main unit) again to turn off the power of the main mode selector unit. (The main unit enters the standby mode.) • With the power off, pressing any of the following butt
Summary of the content on the page No. 16
NX-F30[U].book Page 13 Tuesday, April 21, 2009 6:23 PM Basic operations (continued) Turning off the sound Adjusting the volume level temporarily for surround/subwoofer sound Press [MUTING]. • Press [MUTING] again or [VOL +] or [VOL –], or You can adjust the volume level for the left and turn the [VOLUME] control on the main unit to right surround sound and the subwoofer sound restore the sound. The sound is also restored respectively. when the main unit is turned off once and turned 1 Pr
Summary of the content on the page No. 17
NX-F30[U].book Page 14 Tuesday, April 21, 2009 6:23 PM For the locations of the remote control buttons, refer to page 12. Selecting the headphone Selecting the surround surround mode volume level You can listen to surround sound via headphones You can increase the surround volume level. connected to the [PHONES] terminal. This function is effective for the following conditions: ■When headphones are connected to the (1) When the surround mode is set to an item [PHONES] terminal other t
Summary of the content on the page No. 18
NX-F30[U].book Page 15 Tuesday, April 21, 2009 6:23 PM For the locations of the remote control buttons, refer to page 12. Basic operations (continued) Using the sleep timer Changing the brightness of the display window When the time you specify elapses, the main unit automatically turns off. ■When the main unit is turned on Press [SLEEP]. Press [DIMMER] repeatedly. • Each time you press [SLEEP], the time indicated in • Each time you press [DIMMER], the brightness the display window ch
Summary of the content on the page No. 19
NX-F30[U].book Page 16 Tuesday, April 21, 2009 6:23 PM Listening to FM radio 2 Press [TUNING ] or [TUNING ] repeatedly to select a radio station (frequency). • When the main unit has received an FM radio, the “ST” (stereo) indicator lights up in the display window. Number ■ Automatic tuning: buttons * You can also select a radio station using automatic tuning. Remote control Hold down [TUNING ] or [TUNING ] until mode selector the frequency starts changing, and then release the but
Summary of the content on the page No. 20
NX-F30[U].book Page 17 Tuesday, April 21, 2009 6:23 PM For the locations of the remote control buttons, refer to page 16. Listening to FM radio (continued) Tuning in to a preset radio station Tuning in to a preset FM ■When an FM radio is selected as the source radio station Press the number buttons to select Presetting radio stations in the main unit allows the preset number of the radio station you to easily tune in to a radio station. to which you want to tune in. Presetting FM stati
