Summary of the content on the page No. 1
Data Management Software
CA-S20w
Installation Guide
Summary of the content on the page No. 2
Safety Precautions Before you use the CA-S20w software, we recommend that you thoroughly read this manual as well as the instruction manuals of your PC and the instrument. Formal designations of application software used in this manual (Designation in this manual) (Formal designation) Windows, Windows XP Microsoft Windows XP Professional Operating System Windows, Windows Vista Microsoft Windows Vista Business Operating System Windows, Windows 7 Microsoft Windows 7 Professional Oper
Summary of the content on the page No. 3
Introduction Software License Agreement The terms of the license agreement of the CA-S20w software are provided in the Software License Agreement dialog box displayed on-screen during the installation process. This software can be installed only if you agree to all the terms of the agreement. Notes on Use • The CA-S20w application software is designed to be used with the Windows XP, Windows Vista or Windows 7 operating system. Note that neither operating system is included with this software.
Summary of the content on the page No. 4
CONTENTS 1.1 System Requirements ................................................................................. 3 1.1.1 System Requirements ....................................................................................3 1.1.2 Compatible Instruments.................................................................................3 1.1.3 Language.........................................................................................................3 1.2 Software Installation .............
Summary of the content on the page No. 5
System Requirements CONTENTS 1.1 System Requirements 1.1.1 System Requirements OS Windows XP Professional 32-bit Service Pack 3, 64-bit Service Pack 2 Windows Vista Business 32-bit, 64-bit Windows 7 Professional 32-bit, 64-bit (English, Japanese and Korean versions For Windows XP professional 64-bit, English and Japanese versions only) CPU Equivalent to Pentium 4, 2.8GHz or better Memory 1024 MB or more Hard disk drive At least 80 MB of available disk space is required on the system drive (driv
Summary of the content on the page No. 6
CONTENTS 1.2 Software Installation Install the software before connecting the CA-2000 to the PC. The software is provided on a CD-ROM and the calibration data on a DVD-ROM. A CD-ROM/DVD- ROM drive is required to use them. If an older version of this software has been installed, you need to uninstall it before installing this version. Note If there are any measurement data or setting files stored in the installation folder, be sure to move them to a different folder before uninstalling the old
Summary of the content on the page No. 7
Software Installation CONTENTS 3. Read the software license agreement, select ‘I accept the terms in the license agreement’, and click the Next button. 4. Check the destination folder. Click the Next button. To install to a different folder, click the Change button and specify the folder. 5
Summary of the content on the page No. 8
CONTENTS 5. Click the Install button. Installation starts. 6. Click the Finish button. Installation is complete. 6 Software Installation
Summary of the content on the page No. 9
Software Installation CONTENTS 1.2.2 Uninstallation Method 1. In Windows, select Start - Control Panel - Add or Remove Programs. In the Add or Remove Programs dialog box, a list of currently installed programs is displayed. 2. Select ‘CA-S20w’ from the list and click the Remove button. 3. In the Add or Remove Programs dialog box, click the Yes button. The uninstallation program is executed. 4. Follow the prompts to complete the uninstallation process. Tip See pages 17 and 18 for calibration fil
Summary of the content on the page No. 10
CONTENTS Then, for Windows Vista or Windows 7, follow the procedure below to uninstall the driver of the CA- 2000. 5. From the Start menu, select Control Panel. When ‘Classic View’ is displayed in Windows Vista, select ‘Control Panel Home’. 6. From the ‘System and Maintenance’ menu (Windows Vista) or ‘System and Security’ menu (Windows 7), select ‘System’. 7. Select ‘Device Manager’ under Tasks. 8. Right-click ‘KMSE 2D Analyzer CA-2000’ in ‘Universal Serial Bus controllers’, and click the Uni
Summary of the content on the page No. 11
Connecting the CA-2000 to PC CONTENTS 1.3 Connecting the CA-2000 to PC Install the software before connecting the CA-2000 to the PC. 1.3.1 Connecting the CA-2000 for the first time (Windows XP) 1. After turning on the CA-2000’s power, connect the USB cable to the PC and the CA-2000. The Found New Hardware Wizard dialog box appears. Wait a while. 2. Select ‘No, not this time’ and click the Next button. 9
Summary of the content on the page No. 12
CONTENTS 3. Select ‘Install the software automatically’ and click the Next button. When your OS is Windows XP Professional 64-bit, you need to specify the source of the installation. Select “ca2000.inf” in the “Driver” folder in the software CD and click the Next button. The Hardware Installation dialog box appears. 10 Connecting the CA-2000 to PC
Summary of the content on the page No. 13
Connecting the CA-2000 to PC CONTENTS 4. Click the Continue Anyway button. 5. Click the Finish button. Installation is complete. 11
Summary of the content on the page No. 14
CONTENTS 1.3.2 Connecting the CA-2000 for the first time (Windows Vista) 1. After turning on the CA-2000’s power, connect the USB cable to the PC and the CA 2000. • The Found New Hardware dialog box appears. 2. Click ‘Locate and install driver software’. When the dialog box which confirms User Account Control appears, select ‘Continue’. 3. Insert the software CD into the drive and click the Next button. 4. Click the Close button. • The installation of the driver software is complete. 12 Connec
Summary of the content on the page No. 15
Connecting the CA-2000 to PC CONTENTS 1.3.3 Connecting the CA-2000 for the first time (Windows 7) 1. Insert the software CD into the drive. After turning on the CA-2000’s power, connect the USB cable to the PC and the CA-2000. • The installation of the device driver should start automatically. 2. Select the icon showing Installing device driver software from the taskbar. 3. When the Device Software Installation dialog box appears, click ‘Skip obtaining driver software from Windows Update’. 4.
Summary of the content on the page No. 16
CONTENTS 5. Wait for the screen below to appear and click the Close button. • Please wait for a while as this may take several minutes. 6. Right click on the ‘Computer’ from the Start menu and select ‘Properties’. • The screen below will appear after clicking ‘Device Manager’ on the left of the Control Panel. 7. Right click on ‘k364usb’ and select ‘Update Driver Software’. 8. Click ‘Browse my computer for driver software’. 14 Connecting the CA-2000 to PC
Summary of the content on the page No. 17
Connecting the CA-2000 to PC CONTENTS 9. Designate the driver folder in the software CD and click the Next button. (Example) In the case of CD-ROM in D drive. D:\Driver 10.Click the Close button. • The installation of the driver software is complete. 15
Summary of the content on the page No. 18
CONTENTS 1.4 Installing Calibration Files The CA-2000 you have purchased comes with a calibration data DVD for each lens you selected at time of purchase. All items on the DVD provided must be installed in order for the CA-2000 to make measurements. To install the calibration files, be sure to log on as an administrator to the PC. Note If you selected a user other than a user with administrator privileges, you cannot install the calibration files. Note If you are installing calibration files
Summary of the content on the page No. 19
Installing Calibration Files CONTENTS This operation must be performed for each disk. The drive name may be different depending on your PC usage environment. Tip If the disk is not recognized, check the file path of the drive for the calibration disk in “File Path Settings” below. 1.4.2 Notes on Calibration Files During measurement, or when connecting the PC and CA-2000, the information in the installed calibration files is compared with the information stored in the CA-2000. You will not b
Summary of the content on the page No. 20
CONTENTS 1.4.4 File Path Settings You can change the storage location of measurement files and calibration data and the file path of the drive for the calibration disk. 1. Select Tool - File Path from the menu. The Option File Path dialog box appears. 2. Change each file path as necessary. Click the Browse button to specify the existing file path. In the ‘Save folder’ field, do not choose a location in the root directory of the hard drive (such as C:\) but specify a folder. For ‘Calibration d
