Novatel GPS-534-C user manual

Summary of the content on the page No. 1

surface, see the Mechanical Drawings section of this guide
GPS-534 and GPS-534-C SPECIFICATIONS
for details on the ARINC-743 mounting pattern.
RF
USER GUIDE
3. Attach the antenna to the surface using the four mounting
L1: 1575.42 ±13 MHz
screws supplied. The o-ring compresses and creates a seal
3 dB pass band (typical) L2: 1227.60 ±13 MHz
between the surface and the antenna.
LB: 1542.50 ±17.5 MHz
The GPS-534 is an active
antenna designed to operate at
2 Out-of-band rejection (typical) > 40

Summary of the content on the page No. 2

ELEVATION GAIN PATTERNS MECHANICAL DRAWINGS PHASE CENTER WARRANTY POLICY Dimensions are in inches NovAtel Inc. warrants that its Global Positioning System (GPS) products are free from followed by [mm] Please refer to the Mechanical Drawings on the previous panel defects in materials and workmanship, subject to the conditions set forth below, for the L1 Peak Gain: 4.1 dB L-Band Peak Gain: 5.7 dB L1: Max 4.1 dB L-Band: Max 5.7 dB and the close-up of the label below before reading this section.