Summary of the content on the page No. 1
U C A T
HTR-5140
Natural Sound AV Receiver
Ampli-Tuner Audio-Video
OWNER’S MANUAL
MODE D’EMPLOI
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-
Summary of the content on the page No. 2
SAFETY INSTRUCTIONS 8 Ventilation – The unit should be situated so that its location CAUTION or position does not interfere with its proper ventilation. For RISK OF ELECTRIC SHOCK example, the unit should not be situated on a bed, sofa, DO NOT OPEN rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE through the ventilatio
Summary of the content on the page No. 3
English 19 For US customers only: EXAMPLE OF ANTENNA GROUNDING Outdoor Antenna Grounding – If an outside antenna is connected to this unit, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the ANTENNA MAST LEAD IN National Electrical Code, ANSI/NFPA 70, provides WIRE information with regard to proper grounding of the mast GROUND CLAMP and supporting structure, grounding of the lead-in wire to an antenna di
Summary of the content on the page No. 4
SUPPLIED ACCESSORIES • After unpacking, check that the following parts are included. ACCESSOIRES FOURNIS • Après le déballage, vérifier que les pièces suivantes sont incluses. • Indoor FM Antenna • Remote control transmitter • Antenne FM intérieure • Télécommande • AM Loop Antenna • Cadre-antenne AM • Antenna adapter (U.S.A. and Canada models only) • Adaptateur d’antenne (Modèles pour les Etats-Unis et le Canada seulement) • Batteries (size AAA, R6, UM-4) • Piles (taille AAA, R6, UM-4) 4 05HTR-
Summary of the content on the page No. 5
English FEATURES l 5-Channel Power Amplification l 6-Channel External Decoder Input for DTS Minimum RMS Output Power and other future formats <0.04% THD, 20 Hz – 20 kHz> l Automatic Input Balance Control for Main: 60 W + 60 W (8 Ω) Dolby Pro Logic Surround Center: 60 W (8 Ω) l Test Tone Generator for Easier Speaker Rear: 60 W + 60 W (8 Ω) Balance Adjustment <0.07% THD, 1 kHz> l Speaker Output Mode Changing Main: 70 W + 70 W (8 Ω) Capability Center: 70 W (8 Ω) Rear: 70 W + 70 W (8 Ω) l 40-Station
Summary of the content on the page No. 6
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1. To assure the finest performance, please read this manual This unit is not disconnected from the AC power source as carefully. Keep it in a safe place for future reference. long as it is connected to the wall outlet, even if this unit 2. Install this unit in a cool, dry, clean place – away from itself is turned off. This state is called the standby mode. In windows, heat sources, sources of excessive vibration, this state, this unit is designe
Summary of the content on the page No. 7
English FEATURES OF SOUND EFFECTS Introduction Welcome to the exciting world of digital home entertainment. To make the listening experience even more enjoyable, this unit This unit is one of the most complete and advanced AV includes a number of exclusive, digitally created listening receivers available. Some of the more advanced features may environments known as digital sound fields. Choosing a sound not be familiar to you, but they are easy to use. State-of-the-art field program is like tran
Summary of the content on the page No. 8
The following original functions make the surround-sound effect of Dolby Digital become the most suitable for your audio system and the listening conditions. Manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY”, “PRO LOGIC”, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Copyright 1992 Dolby Laboratories, Inc. All rights reserved. CINEMA DSP: Dolby Surround + DSP The Dolby Surround sound system shows its full ability in a YAMAHA D
Summary of the content on the page No. 9
English CONTROLS AND THEIR FUNCTIONS FRONT PANEL 1 STANDBY/ON 6 TUNING MODE (AUTO/MAN’L MONO) Press this switch to turn on the power to this unit. Press it Press this button to switch the tuning mode to automatic or again to set this unit to the standby mode. manual. To select the automatic tuning mode, press this button so that the “AUTO TUNING” indicator lights up on the display. To select the manual tuning mode, press this button so that the Standby mode “AUTO TUNING” indicator goes off. In
Summary of the content on the page No. 10
q INPUT MODE i BALANCE This button switches the DVD/LD and TV/DBS input signal This control is only effective for the sound from the main mode (AUTO/ANALOG). speakers. Turn the control to adjust the balance of the output volume to w VOLUME the left and right speakers to compensate for sound imbalance This control is used to raise or lower the volume level. caused by the speaker location or listening room conditions. e PHONES jack o TIME/LEVEL When you use headphones, connect the headphones to th
Summary of the content on the page No. 11
English DISPLAY PANEL 1 Multi-information display 6 Signal-level meter This displays various information, for example the station This indicates the signal level of the station being received. frequency, preset station number and name of the selected If multipath interference is detected, the indication decreases. program source. 7 , and indicators 2 MEMORY indicator “ ” lights up when the built-in Dolby Digital decoder is When MEMORY is pressed, this indicator flashes for about five on and t
Summary of the content on the page No. 12
REMOTE CONTROL TRANSMITTER See “REMOTE CONTROL TRANSMITTER” on page 46 for full details. 1 Component selector Press the button for the component you want to control with the remote control transmitter. (The proper code must be set for your component. See “SETUP CODES” on page 53.) When the component selector has been pressed, the remote control transmitter is set to operate that component. 2 POWER When you have preset the code for a YAMAHA component, this button switches between the power on a
Summary of the content on the page No. 13
English 1) 2) 3) q EFFECT /CLEAR /+100 1) This button is used to switch the DSP program on or off. * It only functions when AMP, TAPE/MD, CD, DVD/LD, VCR or TV on the component selector has been pressed. 2) This button is used to clear the settings. * It only functions when DVD MENU on the component selector has been pressed. 3) This button is used to select the channel. * It only functions when CBL/DBS on the component selector has been pressed. 1) 2) w ENTER /+10 1) This button is used
Summary of the content on the page No. 14
SPEAKER SETUP SPEAKERS TO BE USED This unit is designed to provide the best sound-field quality with Use of a subwoofer expands your sound field a 5-speaker configuration, using main speakers, rear speakers It is also possible to further expand your system with the and a center speaker. addition of a subwoofer and amplifier. The use of a subwoofer The main speakers are used for the main source sound plus is effective not only for reinforcing bass frequencies from any or the effect sounds. They
Summary of the content on the page No. 15
English SPEAKER PLACEMENT Refer to the following diagram when you place the speakers. Main: The position of your present stereo speaker system. Main Rear: Behind your listening position, facing slightly speaker (R) inward. Nearly 1.8 m (approx. 6 feet) up from the floor. Subwoofer Rear Center: Precisely between the main speakers. (To avoid Center speaker speaker (R) interference with TV sets, use a magnetically shielded speaker.) Main speaker (L) Subwoofer: The position of the subwoofer is not
Summary of the content on the page No. 16
CONNECTIONS Never plug in this unit and other components until all connections have been completed. CONNECTIONS WITH OTHER COMPONENTS When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit. * If you have YAMAHA components numbered as !, #, $, etc. on the rear panel, connections can be made
Summary of the content on the page No. 17
English CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL) These terminals are used to connect any video input source, such as a camcorder, to this unit. VIDEO AUX Camcorder CONNECTING TO AN EXTERNAL DECODER When using the DTS or other decoder with 6-channel discrete outputs, connect the 6CH DISCRETE OUTPUT terminals of the decoder to the EXTERNAL DECODER INPUT terminals of this unit. DTS or other decoder with 6-channel discrete outputs L L R R (U.S.A. model) DVD player, LD player or other u
Summary of the content on the page No. 18
CONNECTING TO DIGITAL (COAXIAL AND/OR OPTICAL) TERMINALS If your DVD (LD) player, TV/DBS tuner, etc. are equipped with Notes coaxial or optical digital audio signal output terminals, they can • When connecting an audio/video unit to both the digital and be connected to this unit’s COAXIAL and/or OPTICAL digital analog terminals of this unit, make sure to connect between signal input terminals. terminals of the same name. • Be sure to attach the covers when the OPTICAL terminals To make a connect
Summary of the content on the page No. 19
English CONNECTING SPEAKERS Main speakers A Main speakers B Right Left Right Left SPEAKERS L R MAIN REAR CENTER R (SURROUND) L Rear speakers OUTPUT Left Right SUB WOOFER Center speaker Subwoofer system Subwoofer connection Note You may wish to add a subwoofer to reinforce low frequencies Use speakers with the specified impedance shown on the or to output low bass sound from the subwoofer channel. rear panel of this unit. If you have a subwoofer with built-in amplifier, including the YAMAHA Activ
Summary of the content on the page No. 20
How to connect Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass. Caution Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could da
