Summary of the content on the page No. 1
CHAPTER 1
Module Overview and Specifications
This chapter provides an overview of the features of the Catalyst 4500 series
supervisor engines and switching modules. The information is presented in the
following major sections:
• Catalyst 4000 Series Switches, page 1-1
� Catalyst 4500 Series Switches, page 1-2
� Supervisor Engines, page 1-2
� Ethernet and Fast Ethernet Switching Modules, page 1-12
� Gigabit Ethernet Switching Modules, page 1-29
� Other Switching Modules, page 1-42
� Switchin
Summary of the content on the page No. 2
Chapter 1 Module Overview and Specifications Catalyst 4500 Series Switches Catalyst 4500 Series Switches The Catalyst 4500 series switches consist of the Catalyst 4503 switch, the Catalyst 4506 switch, the Catalyst 4507R switch, and the Catalyst 4510R switch. The switches are designed for high-performance, high-density wiring closet applications. A detailed overview of these switches is in the Catalyst 4500 Series Installation Guide. Supervisor Engines These sections describe the su
Summary of the content on the page No. 3
Chapter 1 Module Overview and Specifications Supervisor Engines The supervisor engines have the following features: � Data path and control for all network interfaces � Management functions: – Interface monitoring – Environmental status – SNMP and console/Telnet interface � Hot-swapping Note Packets are not forwarded while the module is removed. A system reboot occurs when a supervisor engine is reinserted. � The Supervisor Engine II-Plus TS provides 12 nonblocking 10/100/1000BASE-T (
Summary of the content on the page No. 4
UPLINKUPLINK STATUS 1 2 UPLINKS ENABLED 10/100 CONSOLE BASE-TX RESET 1% 100% Chapter 1 Module Overview and Specifications Supervisor Engines Figure 1-1 Supervisor Engine I (WS-X4012) 0% 100% STATUS LED Switch load Reset indicators button Ethernet Console management port port Figure 1-2 Supervisor Engine II (WS-X4013) Reset button STATUS LED Gigabit uplink ports Switch load Ethernet indicators management port Console port Catalyst 4500 Series Module Installation Guide 78-13267-06 1-4 2
Summary of the content on the page No. 5
WS-X4515 SUPERVISOR ENGINE IV UPLINK 1UPLINK 2 STATUS LINE ACTIVE LINE ACTIVE ACTIVE 10/100 CONSOLE MGT FLASH RESET UTILIZATION EJECT 1% 100% LINK Chapter 1 Module Overview and Specifications Supervisor Engines Figure 1-3 Supervisor Engine II-Plus (WS-X4013+) Reset button STATUS LED Gigabit uplink ports Switch load CompactFlash port indicators Ethernet management port Console port (RJ-45) Figure 1-4 Supervisor Engine II-Plus TS (WS-X4013+TS) RESET button STATUS LED PoE status LED Switc
Summary of the content on the page No. 6
RESET 1% 100% WS-X4014 UPLINK 1 UPLINK 2 SUPERVISOR III ENGINE LINK ACTIVE LINK ACTIVE STATUS CONSOLE 10/100 MGT UTILIZATION FLASH EJECT Chapter 1 Module Overview and Specifications Supervisor Engines Figure 1-5 Supervisor Engine II-Plus 10GE (WS-X4013+10GE) CONSOLE port Ethernet management port STATUS LED Compact Flash RESET port button Switch load 10 GE uplink Gigabit SFP indicators ports ports Figure 1-6 Supervisor Engine III (WS-X4014) RESET button STATUS LED Gigabit uplink port
Summary of the content on the page No. 7
WS-X4515 SUPERVISOR ENGINE IV UPLINK 1UPLINK 2 STATUS LINE ACTIVE LINE ACTIVE ACTIVE WS-X4515 SUPERVISOR ENGINE IV UPLINK 1UPLINK 2 STATUS LINE ACTIVE LINE ACTIVE ACTIVE 10/100 CONSOLE MGT FLASH RESET UTILIZATION EJECT 1% 100% LINK 10/100 CONSOLE MGT FLASH RESET UTILIZATION EJECT 1% 100% LINK Chapter 1 Module Overview and Specifications Supervisor Engines Figure 1-7 Supervisor Engine IV (WS-X4515) Reset button STATUS LED Gigabit uplink ports Switch load CompactFlash port indicators Ethe
Summary of the content on the page No. 8
Chapter 1 Module Overview and Specifications Supervisor Engines Figure 1-9 Supervisor Engine V-10GE (WS-X4516-10GE) CONSOLE port Ethernet management port STATUS LED Compact Flash RESET port button Switch load 10 GE uplink Gigabit SFP indicators ports ports Front-Panel Components The following connectors, LEDs, and buttons are located on the front panel of the supervisor engine: � The STATUS LED, which indicates the operating state of the module � Two Gigabit uplink ports (WS-X4013, WS-
Summary of the content on the page No. 9
Chapter 1 Module Overview and Specifications Supervisor Engines � The Reset button (recessed), which allows you to reset the system � The CompactFlash port and eject button (WS-X4013+, WS-X4013+ TS, WS-X4013+10GE, WS-4014, WS-X4515, WS-X4516, and WS-X4516-10GE supervisor engines only) (refer to Using the Compact Flash on the Catalyst 4000 Family Supervisor Engine III and IV.) Table 1-1 describes the supervisor engine LEDs. Table 1-1 Supervisor Engine LEDs LED Color/State Description
Summary of the content on the page No. 10
Chapter 1 Module Overview and Specifications Supervisor Engines Ethernet Management Port The WS-X4012 supervisor engine has a 10BASE-T Ethernet management port. The WS-X4516-10GE and WS-X4013+10GE supervisor engine modules have a 10/100/1000BASE-T Ethernet management port.The other supervisor engine modules have a 10/100BASE-T Ethernet management port. Supervisor engines use an RJ-45 connector on the front panel with a link status LED. For the location of the port, see Figure 1-1 (W
Summary of the content on the page No. 11
Chapter 1 Module Overview and Specifications Supervisor Engines Supervisor Memory Table 1-2 lists the memory and processor specifications for the Supervisor engines. Table 1-2 Supervisor Memory Supervisor Engine Supervisor Engine II+ 256 MB SODIMM SDRAM 32 MB Flash memory Supervisor Engine II+TS 256 MB SODIMM SDRAM 32 MB Flash memory Supervisor Engine II+10GE 256 MB SODIMM SDRAM (upgradeable to 512 MB) 64 MB Flash memory Supervisor Engine III 256 MB DIMM SDRAM 64 MB Flash memory 512
Summary of the content on the page No. 12
Chapter 1 Module Overview and Specifications Ethernet and Fast Ethernet Switching Modules Ethernet and Fast Ethernet Switching Modules This section describes the Catalyst 4500 series Ethernet and Fast Ethernet switching modules and includes the following sections: � WS-X4124-RJ45, page 1-12 � WS-X4124-FX-MT, page 1-14 � WS-X4148-FX-MT, page 1-15 � WS-X4148-RJ, page 1-15 � WS-X4148-FE-BD-LC, page 1-16 � WS-X4148-FE-LX-MT, page 1-17 � WS-X4148-RJ21, page 1-18 � WS-X4148-RJ45V, page 1-18 �
Summary of the content on the page No. 13
Chapter 1 Module Overview and Specifications Ethernet and Fast Ethernet Switching Modules Specification Description Number of ports 24 Connector type RJ-45 (See Figure 2-1 on page 2-2.) 1 Cable type UTP or FTP 1. UTP = unshielded twisted-pair Figure 1-10 WS-X4124-RJ45 24-Port 10/100BASE-TX Fast Ethernet Switching Module Catalyst 4500 Series Module Installation Guide 78-13267-06 1-13 113135
Summary of the content on the page No. 14
WS-X4124-FX-MT 24 PORT 100BASE-FX SWITCHING MODULE STATUS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Chapter 1 Module Overview and Specifications Ethernet and Fast Ethernet Switching Modules WS-X4124-FX-MT The WS-X4124-FX-MT 24-port Fast Ethernet switching module (see Figure 1-11) has the following specifications: Specification Description Module type 100BASE-FX Fast Ethernet switching module Port duplex mode Half or full duplex mode Port speed 100 Mbps Number of po
Summary of the content on the page No. 15
43 45 47 31 33 35 37 39 41 19 21 23 25 27 29 7 9 11 13 15 17 1 3 5 WS-X4188-FX-MT 48 PORT 100BASE-FX SWITCHING MODULE 36 38 40 42 44 46 48 22 24 26 28 30 32 34 STATUS 8 10 12 14 16 18 20 2 4 6 Chapter 1 Module Overview and Specifications Ethernet and Fast Ethernet Switching Modules WS-X4148-FX-MT The WS-X4148-FX-MT 48-port 100BASE-FX Fast Ethernet switching module (see Figure 1-12) has the following specifications: Specification Description Module type 100BASE-FX Fast Ethernet switching
Summary of the content on the page No. 16
WS-4448-GB-LX STATUS 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 STATUS 4 PORT 10/100 BaseT ETHENET SWITCHING MODULE 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37
Summary of the content on the page No. 17
43 45 47 31 33 35 37 39 41 19 21 23 25 27 29 7 9 11 13 15 17 1 3 5 WS-X4188-FX-MT 48 PORT 100BASE-FX SWITCHING MODULE 44 46 48 32 34 36 38 40 42 STATUS 18 20 22 24 26 28 30 4 6 8 10 12 14 16 2 Chapter 1 Module Overview and Specifications Ethernet and Fast Ethernet Switching Modules Figure 1-15 Single LC Connector WS-X4148-FE-LX-MT The WS-X4148-FE-LX-MT 48-port 100BASE-LX10 Fast Ethernet switching module (see Figure 1-16) has the following specifications: Specification Description Module
Summary of the content on the page No. 18
WS-X4148-RJ21 10/100 FAST ETHERNET STATUS 25 26 27 28 29 30 31 32 33 34 35 36 1 2 3 45 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 37 38 39 40 41 42 43 44 45 46 47 48 Chapter 1 Module Overview and Specifications Ethernet and Fast Ethernet Switching Modules WS-X4148-RJ21 The WS-X4148-RJ21 48-port Fast Ethernet switching module (see Figure 1-17) has the following specifications: Specification Description Module type 10/100BASE-TX Fast Ethernet switching module Port duplex mode Ha
Summary of the content on the page No. 19
WS-X4648-PWR DC IN-LINE STATUS 48 PORT 10/100BASE-TX SWITCHING IN_LINE POWER ETHERNET PHONE MODULE Chapter 1 Module Overview and Specifications Ethernet and Fast Ethernet Switching Modules Specification Description Number of ports 48 Connector type RJ-45 (See Figure 2-1 on page 2-2.) Cable type UTP Power over Ethernet 6.3 W per-powered device on a port, on all 48 ports Figure 1-18 WS-X4148-RJ45V 48-Port PoE 10/100BASE-TX Switching Module To provide PoE with the 48-port PoE 10/100BASE-TX
Summary of the content on the page No. 20
WS-4448-GB-LX STATUS 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
