Summary of the content on the page No. 1
Intelligent Gigabit Ethernet
Stackable / Routing Switch
24 10/100 Mbps Ports + 2 modules slot
WGSW-2402A
4-port Gigabit Ethernet + 4-slot
WGSW-404
User Manual
Summary of the content on the page No. 2
Trademarks Copyright PLANET Technology Corp. 2002. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a
Summary of the content on the page No. 3
Table of Contents CHAPTER 1 INTRODUCTION................................................................................................................ 1 1.1 PACKAGE CONTENTS....................................................................................................................... 1 1.2 FEATURES....................................................................................................................................... 2 1.3 SPECIFICATION..............................
Summary of the content on the page No. 4
4.1 LOGGING ON TO THE SWITCH ......................................................................................................... 20 4.2 NAVIGATING THROUGH THE CONSOLE INTERFACE ........................................................................... 21 4.3 PERFORMING BASIC MANAGEMENT ACTIVITIES ............................................................................... 21 4.3.1 General Management Configuration ......................................................................
Summary of the content on the page No. 5
5.2.2.7 Deleting Ports.............................................................................................................................. 67 5.2.3 Configuring PVID ................................................................................................................. 67 5.3 IP MULTICAST GROUP PERSPECTIVE.............................................................................................. 69 5.4 MAC ADDRESS PERSPECTIVE .............................................
Summary of the content on the page No. 6
5.14 PORT MIRRORING...................................................................................................................... 146 5.15 SETTING QUALITY OF SERVICE PARAMETERS.............................................................................. 150 5.15.1 Basic concept .................................................................................................................. 150 5.15.1.1 QoS model .......................................................................
Summary of the content on the page No. 7
6.4.2 Configuring LAN Ports ....................................................................................................... 205 6.4.3 Console Port Configuration................................................................................................ 209 CHAPTER 7 PERFORMING ADVANCED SETUP ACTIVITIES..................................................... 213 7.1 MAC ADDRESS MANAGEMENT.................................................................................................
Summary of the content on the page No. 8
8.3.1 RMON Groups Supported ................................................................................................. 261 8.3.2 Bridge Groups Supported.................................................................................................. 261 8.4 PLANET PRIVATE MIB................................................................................................................ 262 APPENDIX A CABLE SPECIFICATIONS ...............................................................
Summary of the content on the page No. 9
CHAPTER 1 INTRODUCTION WGSW-404 and WGSW-2402A are ultra-fast high-performance switches with non-blocking switch fabric of 16Gbps and 12.8Gbps. WGSW-404 is a backbone switch with 4-port 10/100/1000Mbps RJ-45 and 4-slot for media expansion. WGSW-2402A is designed to be a workgroup switch with 24-port 10/100Mbps RJ-45 and 2-slot for media expansion. Their expansion slots support 1000Base-T, 1000Base-SX and 100Base-FX modules that provide great flexibility on enterprise and FTTB applicat
Summary of the content on the page No. 10
One Intelligent Gigabit Ethernet Switch One Power Cord Rack Mounting Brackets One Serial/Console Cable User’s manual CD Quick Installation Guide If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair. 1.2 Features Complies with IEEE 802.3, 802.3u, 802.3z and 802.3ab Ethernet St
Summary of the content on the page No. 11
1.3 Specification Product WGSW-2402A WGSW-404 Hardware Specification 24 10/ 100Base-TX RJ-45 4 10/100/1000Base-T RJ-45 Ports Auto-MDI/MDI-X ports Auto-MDI/MDI-X ports 2 4 Module Slot for 1000Base-SX/T and 100Base-FX modules Through Ethernet interface. Up to 8 units can be managed by Stack Interface single IP 12.8Gbps 16Gbps Switch Fabric Store-and-forward Switch Processing Scheme 6.547Mpps 11.904Mbps Throughput (packet per second) 16K entries Address Table 2Mbytes 4Mby
Summary of the content on the page No. 12
Gigabit ports Supports delay bound, strict priority, WFQ (Weighted Fair QoS Scheduling Queuing) and best effort service disciplines Supports WRED (Weighted Random Early Detection) drop Congestion Avoidance threshold management 10 levels of rate (10 to 100%) - Rate Control configurable on 10/100Mbps port Standards Conformance FCC Part 15 Class A, CE Regulation Compliance IEEE 802.3 (Ethernet) Standards Compliance IEEE 802.3u (Fast Ethernet), IEEE 802.3z (1000Base-SX/LX), IE
Summary of the content on the page No. 13
Chapter 8, SNMP and RMON Management allows you to access the Switch using SNMP management feature. Appendix provides cable specification and more information regarding to stack and VLAN. - 5 -
Summary of the content on the page No. 14
CHAPTER 2 INSTALLATION This Chapter describes the hardware function of the Switches and shows how to install it on the desktop or shelf. Basic knowledge of networking is assumed. Read this chapter completely before continuing. 2.1 WGSW-2402A Hardware Description 2.1.1 Front Panel of WGSW-2402A The front panel of the Switch has 24 RJ-45 ports for 10/100 Mbps in the middle. The port status LEDs are indicated at the left. The expansion modules are situated at the right. Figure 2-1 sh
Summary of the content on the page No. 15
2.1.2 LEDs of WGSW-2402A The LEDs indicate the status of 10/100 Mbps Ethernet ports, Over Heat, Fan Failure and Power. Figure 2-2 shows the LED panel of the Switch. Table 2-2 shows the functions of power and status LEDs. Table 2-3 shows the functions of the port status LEDs. FIGURE 2-2 LEDS PANEL Status LED 10/100 Port Status LEDs Power LED The LEDs are explained in the following tables. TABLE 2-2 POWER AND STATUS LEDS LED Color F
Summary of the content on the page No. 16
Lights to indicate that the port is operating in full-duplex mode. FDX/COL Yellow Blinks periodically to indicate that the connection is experiencing collisions. 2.1.3 Rear Panel of WGSW-2402A The rear panel of WGSW-2402A has a power connector, a Buzzer button and a console port. Figure 2-3 shows a rear panel of the Switch. Table 2-5 explains the function of the ports shown in the Figure 2-4. FIGURE 2-3 REAR PANEL OF WGSW-2402A Console Buzzer Button Power TABLE 2-4 PO
Summary of the content on the page No. 17
FIGURE 2-4 FRONT PANEL OF WGSW-404 Console Status LEDs 10/100/1000 Mbps ports Expansion Ports Table 2-5 Port Function TABLE 2-5 PORT FUNCTION Ports # of Ports Description This is where you can connect to the RS-232 serial port on Console 1 your PC for configuring the management function. These RJ-45 ports support network speeds of 10, 100 or 1000 10/100/1000 4 Mbps, and can operate in full-duplex modes. These ports provide for the installation of one or two expans
Summary of the content on the page No. 18
2.2.3 Rear Panel of WGSW-404 The rear panel of WGSW-404 has a power connector, a Buzzer button and a console port. Figure 2-3 shows a rear panel of the Switch. Table 2-5 explains the function of the ports shown in the Figure 2-4. FIGURE 2-5 REAR PANEL OF WGSW-404 Buzzer Button Power TABLE 2-8 PORT FUNCTION OF THE REAR PANEL Port Function Power This is where you will connect the AC power cord. Note: To depress the Buzzer button will change the reaction of the buzzer.
Summary of the content on the page No. 19
FIGURE 2-6 GIGABIT EXPANSION MODULE WGSW-C1GT Module Status LEDs WGSW-C1SX Module Status LEDs TABLE 2-9 WGSW-C1GT/SX STATUS LEDS WGSW-C1GT LED Color Function Lights to indicate that the Switch is sending or receiving 1000 Green data at 1000 Mbps. Lights to indicate that the Switch is sending or receiving 100 Green data at 100 Mbps. Lights to indicate that the Switch is sending or receiving 10 Yellow data at 10 Mbps. Lights green to indicate that the port is operati
Summary of the content on the page No. 20
FIGURE 2-7 100BASE-FX EXPANSION MODULE WGSW-C1ST Module Status LEDs WGSW-C1SC Module Status LEDs TABLE 2-11 100BASE-FX MODULE STATUS LEDS WGSW-C1SC / WGSW-C1ST LED Color Function Lights to indicate that receiver of fibre port is in normal 100 Green optical input levels. Lights to indicate that the connection is acting. Act Green Lights to indicate that the port is operating at full duplex. FDX/COL Yellow Blinks orange periodically to indicate that the connection is e
