Summary of the content on the page No. 1
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 1
Owner’s Manual
PDUMH15ATNET
PDUMH20ATNET
Switched Rack PDU with
Automatic Transfer Switch
Important Safety Instructions
2
Installation
3
Features
8
Configuration and Operation
10
Technical Support
12
Warranty and Warranty Registration
12
Español
13
Français
25
1111 W. 35th Street • Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
™
Copyright © 2007 Tripp Lite. All rights reserved. SmartOnline is a trademark of Tripp Li
Summary of the content on the page No. 2
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 2 Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that should be followed during the installation, operation, and storage of this product. Failure to heed these instructions and warnings will void the product warranty. • The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line noise protection for connected equipment. • The PDU is designed for indoo
Summary of the content on the page No. 3
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 3 Installation Mounting the PDU The PDU supports four primary mounting configurations: 1U Rack, 0U Rack, Wall and Under-Counter. Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact mounting configurations may vary. 1-1 1U Rack Mo
Summary of the content on the page No. 4
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 4 Installation continued Connecting the PDU continued 2-1 Connect Input Plug Adapters (Optional - Model PDUMH20ATNET Only): The PDU includes two adapters that convert one or both of the L5-20P input plugs to 5-20P input plugs. PDUMH20ATNET 2-1 Connecting the adapters is optional. The PDU will function normally without connecting the adapters. 2-2 Connect Secondary Input Cord to PDU: Although the PDU will operate without connectin
Summary of the content on the page No. 5
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 5 Installation continued Networking the PDU Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label attached to the PDU enclosure. The MAC address is also printed on a label attached to the internal network card. If your network's DHCP server will assign a dynamic IP address to the PDU automatically, go to Step 4-1 5-1 . If you will assign a static IP address to the PDU manually, go
Summary of the content on the page No. 6
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 6 Installation continued Networking the PDU continued 5-3 Connect PDU to Computer: Use the mini- DIN to DB9 serial cable (part number 73-1025) included with the PDU to connect the PDU to the computer. The circular connector A at one B C A end of the cable attaches to the 8-pin mini-DIN serial port B on the PDU. (Align the connector D 5-3 carefully to avoid damaging the pins.) The DB9 C connector at the other end of the cable A co
Summary of the content on the page No. 7
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 7 Installation continued Networking the PDU continued Testing Network Connection 6-1 Access PDU with Web Browser: After an IP address has been assigned to the PDU, attempt to access it with a Web browser that ™ supports frames, forms and Java . Open a Web browser on a computer connected to the LAN and enter the IP address assigned to the PDU. A You should be prompted for a password . The user name is admin and the default passwor
Summary of the content on the page No. 8
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 8 Features Primary AC Input Power Cord (Model PDUMH15ATNET): The cord is permanently attached to the PDU and has a NEMA 5-15P plug. Primary AC Input Power Cord (Model PDUMH20ATNET): The cord is permanently attached to the PDU and has a NEMA L5-20P plug. Secondary AC Input Power Inlet (Model PDUMH15ATNET): The IEC-320-C14 inlet connects to the detachable Secondary AC Input Power Cord. Secondary AC Input Power Inlet (Model PDUMH20A
Summary of the content on the page No. 9
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 9 Features continued NEMA 5-15/20R Outlets (Model PDUMH20ATNET): During normal operation, the outlets distribute AC power to connected equipment. When an outlet is live, the associated LED illuminates. Digital Load Meter (Ammeter): The total electrical current used by the PDU is displayed on the digital meter in amperes. Input Source Indicator: When the PDU is connected to a live AC power source, the Primary or Secondary input LE
Summary of the content on the page No. 10
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 10 Configuration and Operation Automatic Transfer Switch When the Primary and Secondary inputs are both connected to Tripp Lite UPS Systems, the PDU operates as an Automatic Transfer Switch, providing redundant input power for high availability applications. Under normal operating conditions, the PDU will distribute power from the Primary input source, switching to the Secondary input source under certain conditions. The PDU will
Summary of the content on the page No. 11
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 11 Configuration and Operation continued Quick Test After installing the PDU and connecting equipment, you may test the Automatic Transfer Switch function by temporarily shutting down the UPS system connected to the Primary AC input. When the Primary input UPS is no longer supplying AC power, the PDU will Secondary Input Active Primary Input Active switch from the Primary input to the Secondary input, and the Secondary input LED
Summary of the content on the page No. 12
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 12 Technical Support Telephone: (773) 869-1233 8:00 AM - 6:00 PM CST Monday - Thursday 8:00 AM - 5:30 PM CST Friday (CST is Central Standard Time in the United States.) E-mail: techsupport@tripplite.com Warranty and Warranty Registration LIMITED WARRANTY Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 2 years (except
Summary of the content on the page No. 13
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 13 Manual del propietario PDUMH15ATNET PDUMH20ATNET PDU con tomas de corriente controlables para bastidor con Interruptor de Transferencia Automático Instrucciones de seguridad importantes 14 Instalación 15 Características 20 Configuración y operación 22 Soporte técnico 23 Garantía 24 English 1 Français 25 1111 W. 35th Street • Chicago, IL 60609 USA (773) 869-1234 • www.tripplite.com ™ © 2007 Tripp Lite. Todos los derechos reser
Summary of the content on the page No. 14
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 14 Instrucciones de seguridad importantes GUARDE ESTAS INSTRUCCIONES Este manual contiene instrucciones y advertencias que deben seguirse durante la instalación, operación y almacenamiento de este producto. De no seguirlas, se anulará la garantía del producto. • La PDU proporciona cómodas salidas múltiples, pero NO proporciona protección contra sobretensión o ruido en la línea al equipo conectado. • La PDU está diseñada sólo par
Summary of the content on the page No. 15
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 15 Instalación Montaje de la PDU La PDU soporta cuatro configuraciones básicas de montaje: Bastidor de 1U, bastidor de 0U, de pared y debajo de mostrador. Nota: Independientemente de la configuración, el usuario debe determinar la idoneidad de los materiales y accesorios así como de los procedimientos antes del montaje. La PDU y el material incluido están diseñados para racks (bastidores) y cajas de rack (bastidor) comunes, y p
Summary of the content on the page No. 16
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 16 Instalación continuación Conexión de la PDU continuación 2-1 Conecte los adaptadores del enchufe de entrada (Opcional - sólo para modelo PDUMH20ATNET): La PDU incluye dos adaptadores que transforman uno o ambos PDUMH20ATNET 2-1 enchufes de entrada L5-20P en enchufes de entrada 5-20P. La conexión de los adaptadores es opcional. La PDU funcionará de manera normal sin conectar los adaptadores. 2-2 Conecte el cordón de alimentació
Summary of the content on the page No. 17
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 17 Instalación continuación Conectando Su PDU a la Red Nota: La dirección MAC (Media Access Control / Control de Acceso de Medios) del PDU (una serie de 12-dígitos en este formato: 000667xxxxxx) está impresa en una etiqueta adherida al gabinete del PDU. La dirección MAC también está impresa en una etiqueta adherida a la tarjeta de red interna. Si el DHCP (Dynamic Host Configuration Protocol / Protocolo Dinámico de la Configuració
Summary of the content on the page No. 18
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 18 Instalación continuación Conectando Su PDU a la Red continuación 5-3 Conecte el PDU a la Computadora: Use el cable serial mini-DIN a DB9 (parte número 73-1025) incluido con el PDU para conectar el PDU con la computadora. El conector circular A B C en uno de los extremos del cable se conecta al A B puerto serial mini-DIN de 8-pines en el PDU. (Alinee el conector cuidadosamente para evitar D 5-3 dañar los pines.) El conector DB9
Summary of the content on the page No. 19
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 19 Instalación continuación Conectando Su PDU a la Red continuación Probando la Conexión de Red 6-1 Acceda al PDU con el Navegador de Red: Después que una dirección IP ha sido asignada al PDU, trate de acceder con navegador de Web que soporte frames [marcos], forms [formas] y Java™. Abra un Navegador de Web en una computadora conectada al LAN (Local Area Network / Red de Area Local) e introduzca la dirección IP del PDU. Se le sol
Summary of the content on the page No. 20
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 20 Características Cordón de alimentación de entrada de CA primaria (Modelo PDUMH15ATNET): Este cordón se encuentra conectado permanentemente a la PDU y tiene un enchufe NEMA 5-15P. Cordón de alimentación de entrada de CA primaria (Modelo PDUMH20ATNET): Este cordón se encuentra conectado permanentemente a la PDU y tiene un enchufe NEMA L5-20P. Cordón de alimentación de entrada de CA secundaria (Modelo PDUMH15ATNET): La entrada IE
