Summary of the content on the page No. 1
April 2005
AC1030A
2-Channel
Component Video Splitter/Switch
AC1030A
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX
CUSTOMER
FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
SUPPORT
Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
INFORMATION
Web site: www.blackbox.com • E-mail: info@blackbox.com
Summary of the content on the page No. 2
2-Channel Component Video Splitter/Switch TRADEMARKS USED IN THIS MANUAL BLACK BOX and its logo are registered trademarks of Black Box Corporation. Apple and Macintosh are registered trademarks of Apple Computer, Inc. IBM is a registered trademark of International Business Machines Corporation. SGI is a registered trademark of Silicon Graphics, Inc. Sun and Sun Microsystems are registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Any
Summary of the content on the page No. 3
Model AC1030A FEDERAL COMMUNICATIONS COMMISSION AND CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Sub
Summary of the content on the page No. 4
2-Channel Component Video Splitter/Switch Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación
Summary of the content on the page No. 5
Model AC1030A Contents 1. Introduction ..............................................................................page 5 1.1 General ................................................................................page 5 1.2 Features ...............................................................................page 6 2. Installation .................................................................................page 7 3. Operation .............................................
Summary of the content on the page No. 6
2-Channel Component Video Splitter/Switch 1. Introduction 1.1 General The Model AC1030A is a versatile dual-purpose unit that can function as either a Video Splitter (1 in x 2 out) or a Switcher (2 in x 1 out). Its mode of operation is set via a convenient front panel switch. The device is compatible with analog Component Video (YCbCr, or YPbPr) and RGB (sync-on-green) signals. It supports all RGB, TV, and HDTV resolutions up to 1080i. Figure 1 – Rear and Front of the AC1030A
Summary of the content on the page No. 7
Model AC1030A 1.2 Features • Dual-purpose unit; can work as a splitter or as a switch • Perfect for high quality video • Supports all resolutions including 720p and 1080i • LED Indicators • Compact and Economical • Installs in minutes • Includes BNC-to-RCA adapters to allow use of either cable • Universal Power Supply 6
Summary of the content on the page No. 8
2-Channel Component Video Splitter/Switch 2. Installation 1. Your package includes the Splitter/Switch box, a power supply, 9 pieces of RCA-to-BNC adapters, and this Manual. No cables are included with this device, if you need to purchase Component cables for inputs and outputs please contact Black Box. 2. Prior to applying the power supply to the unit, decide if the application calls for a Splitter (1 in x 2 out) or a Switch (2 in x 1 out) and set the mode of operation via the fr
Summary of the content on the page No. 9
Model AC1030A 3. Operation When the AC1030A is configured as a Splitter, both LED’s on the front panel (labeled A and B) will be lit and the push-button switches are disabled. Alternatively, if the unit is acting as a Switch, only on of the LED’s on the front panel will be lit. Use the push-buttons on the front panel to select the input channel to be routed to the output. By default, upon power-on reset, channel 1 is selected. Note that the unit can also be used for Composite Video
Summary of the content on the page No. 10
2-Channel Component Video Splitter/Switch 4. Troubleshooting 4.1 FAQ No Sync or Color Distortion Most common problem can be attributed to incorrect cable connection to the unit. The Component video and RGB signals have 3 components each. This means that each port has 3 connections and their proper usage is imperative. In general use the following guidelines: G or Y à green cable B or Pb à blue cable R or Pr à red cable 4.2 Calling Black Box If you determine that your un
Summary of the content on the page No. 11
Model AC1030A 5. Specifications Standards Analog Component Video YPbPr or YCbCr and RGB signals with sync-on-green. Resolutions All Standard TV, HDTV and PC resolutions Including: 640 X 480, 720 X 480, 720 X 576, 800 X 600, 1024 X 768, 1280 X 720, 1280 X 768, 1280 X 1024, 1600 X 1200, 1920 X 1080 Temperature Operating: 32 to 122°F (0 to 50°C); Storage: –40 to +185°F (–40 to +85°C) Enclosure Steel MTBF 90,000 hours (calculated estimate) Power From utility-power (mains) o
Summary of the content on the page No. 12
2-Channel Component Video Splitter/Switch 11
Summary of the content on the page No. 13
Summary of the content on the page No. 14
© Copyright 2005. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746
