Summary of the content on the page No. 1
*32322
HP PSC
Start Here
Important: Do not connect the USB cable until
Step 15 or the software may not install properly.
1
Follow the steps in order. If you have problems during setup, see Troubleshooting at the end of this Guide.
Remove all tape and cardboard
2
CA UTION: Make sure you
remove all packing material
or the device will not work
properly.
Locate components
3
Title in HP Futura Book
14-20 pt., centered
Subtitle in 10-14 pt., centered, white
It Mag aliano yar Slo Slov ve enc
Summary of the content on the page No. 2
Attach the control panel overlay (if not attached) 4 b Remove the bottom tab and the backing from a Bend the bottom of the control panel overlay. the overlay. c Lift the lid. Insert the tabs of the overlay into d Press down on the overlay to ensure it is fi rmly the device. Make sure the tabs are inserted attached. Do not press on the LCD area. The correctly before sticking the overlay to the tabs must be in the slots. device. CAUTION: The control panel overlay must be attached fo
Summary of the content on the page No. 3
Press the On button 6 After you press the On button, the green light On fl ashes, and then becomes solid. This may take up to a minute. Load plain white paper 7 b d a c Open access door 8 Lower the access door until it stops. Make sure the print carriage moves to the right side. Remove tape from both cartridges 9 Pull the pink tab to remove the tape from both print cartridges. CAUTION: Do not touch the copper-colored contacts or retape the cartridges. HP All-in-One 3
Summary of the content on the page No. 4
Insert the tri-color print cartridge 10 CA UTION: The device must be On before you can insert the print cartridge. a Hold the tr i-color print cartridge with the blue HP logo on top. b Place the tr i-color print cartridge in front of the left slot . c Push the cartridge fi rmly into the slot until it snaps into place. Insert the black print cartridge 11 a Hold the black print cartridge with the blue HP logo on top. b Place the blac k print cartridge in front of the rig
Summary of the content on the page No. 5
Align the print cartridges 12 After you insert the cartridges, a print cartridge alignment page prints. (This may take a few minutes.) a Lift the lid. Place the top of alignment page face down in the right front corner of the glass. Close the lid. b Press the Start Scan button. After the On light stops blinking, alignment is complete. Recycle or discard the alignment page. Turn on your computer 13 a Turn on your computer, login if necessary, and then wait for the desktop to appear.
Summary of the content on the page No. 6
Connect the USB cable 15 Windows Users: Macintosh Users: You may have to wait several minutes before you see Connect the USB cable to the port on the back the onscreen prompt to connect the USB cable. of the HP All-in-One, and then to any USB port on your computer. Once the prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer. If you do not see these screens, see T roubleshooting on the next page. 6 HP All-in-O
Summary of the content on the page No. 7
Finish software installation 16 Windows Users: Macintosh Users: Follow the onscreen instructions. Complete the a Insert the HP All-in-One M acintosh CD. Sign up no w screen. Congratulations! b Double-click the HP All-in -One Installer icon. c Make sure you complete all screens, including the Setup Assistant. Congratulations! Troubleshooting Software Problem: (Windows only) You did not see the screen telling you when to connect the USB cable. Ac tion: Remove, and then re-insert
Summary of the content on the page No. 8
*Q5888-90232* Troubleshooting - *Q5888-90232* Control Panel Q5888-90232 The fi rst image shows how the control panel overlay looks after a successful setup. The second image shows possible problems. See below for more information. Correct: Alerts: 1 2 3 E 4 Alerts: Action: The C heck Paper light is fl ashing. Check the input tray. The paper was not loaded correctly. 1 Reload the paper, and then press the Cancel/Resume button. The C heck Print Cartridge light is Make sure the tape was remov
