Summary of the content on the page No. 1
Prestige 2000W
VoIP Wi-Fi Phone
Quick Start Guide
Version WJ.00.10
3/2005
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
Summary of the content on the page No. 2
Prestige 2000W Quick Start Guide Overview The Prestige 2000W is a wireless Voice over IP (VoIP) telephone. It combines the benefits of Internet telephony, like cheaper calls, with mobility. This guide covers how to configure and use your Prestige to make phone calls through the Internet. You can make and receive calls as long you are within range of an IEEE802.11b enabled wireless network. See the User’s Guide for more information on all features. Note: You should have Internet access and a
Summary of the content on the page No. 3
Prestige 2000W Quick Start Guide 1 Place the Prestige face down, push down on the 2 With the side of the battery with the CE label grooves and slide the battery cover off. facing up; align the three metal contacts on the battery to the three corresponding contacts on the telephone and press the battery down into place. Note: DO NOT remove the battery’s plastic tab 3 Connect the included power adaptor (use only 4 Plug the power adaptor into an appropriate power this adaptor) to the charger
Summary of the content on the page No. 4
Prestige 2000W Quick Start Guide 6 The battery indicator bar on the LCD display blinks. It stops blinking when the battery is fully charged. 12:00 ZyXEL Not registered Menu Names 7 Remove the Prestige from the charger. 1.1 Keypad and Front Panel Use the Left key to select on-screen menu options. Use the Right key to return to the previous menu. You can also use this key as a shortcut to the Prestige’s built-in phone book. Use the arrow keys to navigate between menus and move the c
Summary of the content on the page No. 5
Prestige 2000W Quick Start Guide 2 The LCD Screen Menus This section introduces the Prestige’s LCD screen menu system. The Prestige initializes after you turn it on. Initializing…. >>Please Wait!<< 2.1 The Main Screen The main screen displays after initialization. Hold down the # key for two seconds if the keypad is locked. shows the strength of the 12:00 shows the battery’s current wireless LAN signal. charge. Not registered is the Prestige’s current ZyXEL Menu The bottom left disp
Summary of the content on the page No. 6
Prestige 2000W Quick Start Guide 2.3 Text Input • When you need to enter text or numbers in a screen, use the Off key to clear the WEP key 1 default text or backspace. ********** • Use the up and down arrows to select the type of characters (capital letters, lower- case letters, numbers or symbols). Ok Aa1@ Clear 3 Initial Configuration Use the LCD screen menu system for initial configuration to make calls. Your service provider may have already configured the settings for you. No
Summary of the content on the page No. 7
Prestige 2000W Quick Start Guide 3.1.2 WEP Encryption WEP (Wired Equivalent Privacy) encryption scrambles all communication transmitted between the Prestige and the AP to keep network communications private. Do the following if you were given a WEP key to use, otherwise skip to Section 3.1.3 on page 8. 1 Use the up or down arrow and the Left key to select WEP Select. 6. WEP Select 7. Profiles 8. Auth Type Select Back 2 Select the same length of WEP keys as the AP (64-bi
Summary of the content on the page No. 8
Prestige 2000W Quick Start Guide 6 Select Key Select. 11. Key Select 12. Profiles 13. Auth Type Select Back 7 Select the key that the AP is using. Key 1 8 Stay in the Wireless menu and continue with the next section. Key 2 Key 3 Select Back 3.1.3 Profiles Use a profile to save your wireless settings for future use. 1 Use the up or down arrow and the Left key to select Profiles. 7. Profiles 8. Auth Type 1. Site Survey Select Back
Summary of the content on the page No. 9
Prestige 2000W Quick Start Guide If you were given an IP address and subnet mask, go to Section 3.2.1 on page 9. If you were not given an IP address and subnet mask, go to Section 3.2.2 on page 10. 3.2.1 Fixed IP With this option you have to manually enter an IP address, subnet mask and gateway IP address. These are given to you by the network administrator. 1 Select Net Settings in the first menu screen (use the up or down arrow to 4. Net Settings highlight it and then press the Left key). 5
Summary of the content on the page No. 10
Prestige 2000W Quick Start Guide 7 Clear the subnet mask and enter your’s. Subnet Mask 255.255.255.0 Ok Aa1@ Clear 8 Select Gateway. 4. Gateway 1. Network Mode 2. IP Address Select Back 9 Clear the gateway IP address and enter your’s. Gateway 10The Prestige restarts when you return to the main screen. 192.168.1.1 Ok Aa1@ Clear 3.2.2 DHCP If you do not have a specific IP address for your Prestige, use the following directions to set your Prestige t
Summary of the content on the page No. 11
Prestige 2000W Quick Start Guide Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. You need a user name (PPPoE name) and password from you ISP. 1 Select Net Settings in the first menu screen (use the up or down arrow to 4. Net Settings highlight it and then press the Left key). 5. SIP Settings 6. Settings Select Back 2 Select Network Mode. 1. Network Mode 2. IP Address 3. Subnet Mask Select Back 3 Select PPPoE. [3] PP
Summary of the content on the page No. 12
Prestige 2000W Quick Start Guide 6 Select PPPoE Pwd. 3. PPPoE Pwd 1. Network Mode 2. PPPoE Name Select Back 7 Clear the PPPoE password and enter your’s. PPPoE Pwd 8 The Prestige restarts when you return to the main screen. ************************* Ok Aa1@ Clear 3.3 SIP Settings The Prestige uses Session Initiated Protocol (SIP), an internationally recognized standard for implementing VoIP. The last step in initial configuration is to register your Prestige
Summary of the content on the page No. 13
Prestige 2000W Quick Start Guide 4 Use the left arrow button to clear the default text. Use the up and down arrows Registrar IP to select the type of characters. Enter the registrar server’s IP address or sip.proxy.net domain name. Use the Left key to select Ok when you are done. Ok Aa1@ Clear 5 Select Port. 2. Port 3. Expiry Time 1. Registrar IP Select Back 6 Clear the default port number and enter the registrar server’s listening port Port number. Leave th
Summary of the content on the page No. 14
Prestige 2000W Quick Start Guide Configure the Prestige to use an outbound proxy server if your LAN is behind a NAT router that does not support SIP. If your voice service provider gave you an outbound proxy server address and port, then enter them here. 1 Select Outbound Proxy. 2. OutboundProxy 3. Proxy Server 4. User Account Select Back 2 Select Proxy IP. 1. Proxy IP 2. Port Select Back 3 Use the left arrow button to clear the default text. Use the up
Summary of the content on the page No. 15
Prestige 2000W Quick Start Guide Configure Proxy Server settings to have the Prestige use your provider’s SIP server. 1 Select Proxy Server. 3. Proxy Server 4. User Account 1. Registrar Select Back 2 Select Proxy IP. 1. Proxy IP 2. Port Select Back 3 Use the left arrow button to clear the default text. Use the up and down arrows Proxy IP to select the type of characters. Enter the SIP server’s IP address or domain sip.proxy.net name. Use the Left key to se
Summary of the content on the page No. 16
Prestige 2000W Quick Start Guide When you registered for your voice account, you should have been given a telephone number, user name and password. Do the following to have Prestige use them when connecting to the SIP server. 1 Select User Account. 4. User Account 1. Registrar 2. OutboundProxy Select Back 2 Select Phone Number. 1. Phone Number 2. Username 3. User Pwd Select Back 3 Use the left arrow button to clear the default text. Use the up and down arro
Summary of the content on the page No. 17
Prestige 2000W Quick Start Guide 6 Select User Pwd. 3. User Pwd 1. Phone Number 2. Username Select Back 7 Clear the password and enter yours. User Pwd 8 Return to the main screen. The Prestige restarts. ************* Ok Aa1@ Clear 4 Phonebook Use the phonebook feature to store telephone numbers. 4.1 Calling Methods There are two ways the Prestige can dial a telephone number; either by using the SIP proxy server or an IP address. Select Proxy to have the SIP se
Summary of the content on the page No. 18
Prestige 2000W Quick Start Guide You must use a phonebook entry to make an IP to IP call. 1 Select Phonebook In the first menu. 3. Phonebook 4. Net Settings 5. SIP Settings Select Back 2 Select Add Entry. 2. Add Entry 3. Erase 1. Search Select Back 3 Enter the callee’s name. Use the up and down arrows to select the type of Display Name: characters. Use the Left key to select Ok when you are done. Ok Aa1@ Clear 4 Enter the telephone number. User In
Summary of the content on the page No. 19
Prestige 2000W Quick Start Guide 5 Using the Prestige The following sections describe how to use your Prestige for basic tasks. 5.1 Dialing a Telephone Number Do the following to call a phone number that is not already in your Prestige’s phonebook. 1 When the Prestige is in standby mode, use the numerical keys to enter the phone number. 2 If you enter an incorrect number, press the Right key to backspace. 3 Press the Call key to make your call. 5.2 Using the Phonebook to Dial a Telephone Number
Summary of the content on the page No. 20
Prestige 2000W Quick Start Guide 6.1 Accounts The web configurator has two accounts. The user account provides normal functionality of the Prestige and configurable settings. The administrator’s account allows you to alter the way the Prestige makes and receives calls, for example selecting a voice codec. Note: Do not change the administrator settings unless you know what you are doing. These settings affect the way your Prestige makes and receives calls and are already configured for best
