Summary of the content on the page No. 1
Component / VGA with Audio to HDMI Converter
Model #: C-COMPVGA-HDM
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without n
Summary of the content on the page No. 2
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commi
Summary of the content on the page No. 3
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions suppl
Summary of the content on the page No. 4
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction Avenview C-COMPVGA-HDM, Component / VGA with Audio to HDMI Converter provides an easy and instant
Summary of the content on the page No. 5
1.5 Package Contents Before you start the installation of the converter, please check the package contents. - C-COMPVGA-HDM x 1 - Power Adapter (+5VDC, 2A) x 1 - User’s Manual x 1 www.avenview.com 5
Summary of the content on the page No. 6
1.6 Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com 6
Summary of the content on the page No. 7
1.7 Panel Description 1.7.1 Front Panel 1 2 3 4 1. S/PDIF IN 2. STEREO IN 3. Component or VGA IN 4. Component or VGA Select Button 1.7.2 Rear Panel 1 2 3 4 1. Mode Switch 2. HDMI OUT 3. Power Indicator 4. 5V DC Power Jack 1.7.3 DIP Switch PIN # Mode OFF Reset to Factory default EDID 1 ON Learn & store connected monitor’s EDID 1 OFF Analog Audio Input 2 ON S/PDIF Audio Input 2 www.avenview.com 7
Summary of the content on the page No. 8
1.8 Installation To setup Avenview C-COMPVGA-HDM follow these steps for connecting to a device: 1. Power off display source such as DVD Player, Set-top box, PC etc. 2. Connect VGA or Component source to the video input 3. Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack 4. Connect VGA/Component Adapter to VGA or Component input of the device 5. Connect HDMI cable to device and TV or projector 6. Plug in 5V DC power cord to power jack of C-HDM-COMPVGA 7. Power on C-COMP
Summary of the content on the page No. 9
Section 2: Specifications Item Description Units C-COMPVGA-HDM Component/VGA with Audio to HDMI Converter Unit Description HDMI 1.2a HDMI Compliance Video Bandwidth 165MHz (4.95Gbps) Single Link: 1080p 60, WUXGA (1920x1200@60Hz) Video Support Component Video: 720p / 1080i Audio Support Stereo Audio Output Video Signal 1.2 Volts (peak-to-peak) Output DDC Signal 5 Volts (peak-to-peak, TTL) 1 x VGA Input 1 x RCA 1 x 3.5mm Output HDMI x 1 HDMI Connector Type A (19 pin female) VG
Summary of the content on the page No. 10
2.1 Supported Resolutions 2.1.1 VGA Supported Mode Resolution Supported Mode Resolution VESA 640x400 @85Hz VESA 1152x864 @60Hz VESA 720x400 @85Hz VESA 1152x864 @75Hz VESA 640x480 @60Hz VESA 1152x864 @55Hz VESA 640x480 @72Hz VESA 1280x768 @60Hz VESA 640x480 @75Hz VESA 1280x768 @75Hz VESA 640x480 @85Hz VESA 1280x768 @85Hz VESA 800x600 @60Hz VESA 1280x960 @60Hz VESA 800x600 @72Hz VESA 1280x960 @85Hz VESA 800x600 @75Hz VESA 1280x1024 @60Hz VESA 800x600 @85Hz V
Summary of the content on the page No. 11
Notice 1. Only HDMI enabled TV sets with under-scan/over-scan support, the full active video can be accurately displayed. Some HDMI equipped TV sets may not support this feature. If under-scan/over-scan* is NOT supported, the top, bottom, left and right border of the active video may be screened, and the S/PDIF audio may not sound right. 2. Analog stereo audio can merely support 2-channel audio. This version does NOT support 8-channel analog audio applications. 3. S/PDIF audio input sup
Summary of the content on the page No. 12
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
