Sanus Systems Sanus VisionMount VMF VMF VMF user manual

Summary of the content on the page No. 1

Assembly Instructions for Model: VMF
Thank you for choosing Sanus Systems wall mount furniture. This product is designed to mount VESA 75/100
LCD televisions up to 50 pounds onto a vertical wall. It allows you to effortlessly tilt your new television up to
15° up or down without the use of tools. Check carefully to make sure there are no missing or defective parts.
Never use defective parts. Improper installation may cause damage or serious injury. If you do not understand
these directions,

Summary of the content on the page No. 2

Concrete, brick and concrete block in- Diagram 1b stallation: Use the Wall Plate (a) as a template to mark 2 g j hole locations on the wall. Always locate Con- a crete Anchors (j) in the brick, block, or concrete. Never drill into the mortar between blocks! Carefully pre-Drill these holes with a 1/2” ma- sonry bit to at least 2.5” in depth. Insert a Con- crete anchor into each of these holes. Make sure the anchor is seated completely flush with the