RCA RCR461 user manual

Summary of the content on the page No. 1

RCR461
Universal Remote Control
Owner’s Manual
Manual del Propietario (parte posterior)
Battery Installation and Information
4-Component Universal Remote
Your universal remote requires two AA Alkaline batteries (batteries
Congratulations on your purchase of this four-component universal
may or may not be included, depending on model).
remote. This universal remote controls up to four electronic
To install the batteries:
components and makes juggling remote controls a thing of the past.
1.

Summary of the content on the page No. 2

3. Press and hold the component key Illuminated Component Names (TV, DVD, VCR·AUX, SAT·CBL) you wish to program. (To program the VCR·AUX key to control a component other than a VCR, see page 3.) The component name Depending on which mode you are in (TV Mode, VCR Mode, illuminates and remains on. etc.), the word above each component key lights up to serve as an 4. While holding the component key indicator light, providing feedback for various functions. When a down, press and hold the O

Summary of the content on the page No. 3

3. Press and hold the component key 3. While holding the component key (TV, DVD, VCR·AUX, SAT·CBL) down, press and hold the ON·OFF you wish to program. The name of key. The illuminated component the chosen component illuminates name turns off. and remains on. If you release the 4. After holding down both keys for component key any time during three seconds, all of the component the Direct Code Entry procedure, names illuminate and stay on. the illuminated component name turns off,

Summary of the content on the page No. 4

6. Press and release the ON·OFF key repeatedly Auto Code Search and Entry until your component turns off. Each time The Auto Code Search and Entry Method enables the remote to you press the ON·OFF key, the illuminated automatically search through all the codes in the Code Lists for component name blinks, and the next code the one that operates your component. Example used is for TV in the list is sent. This process continues component set up. until all of the codes in the Code Lists hav

Summary of the content on the page No. 5

Note: If you accidentally press the REVERSE key after your component 5. Repeat step 4 until you have retrieved all four numbers in the code. responds, press and release the FORWARD key. Then, wait two seconds to see tif your component turns off again. 6. After the fourth number is retrieved, the illuminated component name 8. Once your component turns on, you have (NAME (LIGHT blinks briefly, then turns off. found the correct code. You must save the BLINKS) OFF) new code by pressing an

Summary of the content on the page No. 6

2. Press the component key whose Volume Punch-through menu you want to access. Your universal remote’s Volume Punch-through feature allows you to 3. Press the MENU key. The control the volume and mute functions of your TV without the need illuminated component name blinks, to place the remote in TV mode. For example, your TV volume and indicating you are in the Menu mute functions work even when you are in VCR Mode, because they Mode. “punch through” from one component to another. 4.

Summary of the content on the page No. 7

Problem: The VCR won’t record. Troubleshooting • Make sure the remote is in VCR Mode. Problem: The remote does not operate your component. • Make sure the tape is properly loaded in the VCR. • You must put the remote in the correct mode by pressing the • Make sure the tape is not write-protected. If the safety tab is removed corresponding component key (TV, DVD, VCR·AUX, SAT·CBL) so the the tape is write-protected, and you cannot record onto that tape. remote knows which component you wan