Summary of the content on the page No. 1
Earn BISSELL Rewards! Earn BISSELL Rewards!
R Register your egister your
product today! product today!
See details on See details on
back page page 2
®
USER'S GUIDE
33N8, 78R5 SERIES
2
Thank You
2
Product Registration
3
Safety Instructions
4-5
Product View
6
Special Features
7-11
Operations
12-13
Troubleshooting
14
Replacement Parts
14
Accessories
15
Warranty
16
Consumer Services
Summary of the content on the page No. 2
Thanks for buying a BISSELL SpotBot We’re glad you purchased a BISSELL SpotBot. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL SpotBot is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floo
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appli- ■ Unplug by grasping the plug, not the cord. ance, basic precautions should be Do not unplug by pulling on cord. observed, including the following: ■ Always connect to a properly grounded ® Read all instructions before using your SpotBot . outlet; see grounding instructions. ■ Do not use without tanks in place. WARNING: To ■ Do not modify the 3-prong grounded plug. reduce the risk of fire, electric shock, or injury: ■ Use
Summary of the content on the page No. 4
Product view Automatic Smart System™ control panel Dirty water/collection tank Clean water/solution tank Hose Connector Spray trigger Keep plenty of genuine BISSELL compact Advanced Cleaning Formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep clean- ing formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty. 4 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Summary of the content on the page No. 5
Product view Automated cleaning brush Suction nozzles Deep Reach™ Technology Power Cord wraps cord Vacuum flex hose Tough Stain Brush™ Cleaning window Tough Stain Brush™ Storage 5 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Summary of the content on the page No. 6
Special features Front view Clean water/solution tank Looking at the front of the unit, the clean water/solution tank is on the right side. Automatic Smart System™ control paneI Located on top of the unit, you will find the control panel. Select the cleaning cycle you would like to use (detailed instructions on page 8). Dirty water/collection tank Looking at the front of the unit, the dirty water/collection tank is on the left side. Vacuum flex hose Wraps around the center of the uni
Summary of the content on the page No. 7
Operations Getting ready 1A. 1B. 1. To fill the clean water/solution tank: A. Remove the clean water tank by lifting it straight up and then away from the unit. B. Unscrew the cap at the bottom of the clean water tank. There are 2 ways you can fill and use the tank: 2. For common stains such as dirt, grime, pet or oily stains, use the fill lines on the left side of the tank and fill with BISSELL 2X compact formula (trial size included) and water. 2. 3. For dye based stains such as coffee
Summary of the content on the page No. 8
Operations How to begin Using the Automatic Smart System™ Your new SpotBot features an Automatic Smart System that takes the guesswork out of spot and stain removal. With the touch of a button, you can select the cleaning cycle to use your preferred method of cleaning. 1. Surface Stain Cycle This cycle has been designed for stains that are on the surface of your carpeting. This cycle will run for approximately 3 minutes. 2. Set-In Stain Cycle Use on stains that Tip: have had a period of
Summary of the content on the page No. 9
Operations To begin cleaning 1. Place the filled clean water/solution tank onto the unit. 2. Plug your SpotBot in. The power light will illuminate, indicating your SpotBot is ready to go. Automated cleaning 1. Place the unit directly over the spot or stain, making sure the stain is in the center of the cleaning area. 2. Select which cleaning cycle (surface stain or set-in) you would like to use. SpotBot will begin spraying, brushing and suctioning the soiled area, in a pre-programmed
Summary of the content on the page No. 10
Operations Manual cleaning 1. 1. Remove the hose from the unit by depressing the release button. 2. A. Remove the Tough Stain Brush from the back of the unit. B. Attach the Tough Stain Brush onto the grip of the hose. 3. Select the hose button on the 2A. 2B. control panel to start the SpotBot. NOTE: In manual mode, the SpotBot will not turn on until the hose is discon- nected from the hose connector. If it is not removed within 30 seconds of pushing the hose button, the unit will shut
Summary of the content on the page No. 11
Operations Manual cleaning continues 11. 10. Press the STOP button to turn off the SpotBot. 11. Disconnect the cleaning tool from the vacuum flex hose by pushing down on the button lock and pulling straight off (do not twist tools to remove them). 12. Unplug the machine and wrap the cord around the cord wraps. Attach the Tough Stain Brush to the base of SpotBot. Wrap the hose around the machine. Tip: Storage If a significant amount of water and solution remains 1. Turn the unit OFF (O)
Summary of the content on the page No. 12
Troubleshooting Automated cleaning SpotBot will not run Possible causes Remedies 1. Power cord no t plugged in 1. Check electrica l plug 2. Blown fuse/tripped breaker 2. Replace household fuse or rese t breaker 3. Vacuum flex hose is no t snapped into place securely 3. Check to make sure the vacuum flex hose is snapped into place Unusual or odd noise Possible causes Remedies 1. Clean water/solution tank is ou t of fluid 1. Fil l clean water/so
Summary of the content on the page No. 13
Troubleshooting Manual cleaning Cleaner will not run Possible causes Remedies 1. Power cord no t plugged in 1. Check electrica l plug 2. Blown fuse/tripped breaker 2. Replace household fuse or rese t breaker 3. Hose no t removed from receiver 3. Remove hose 4. SpotBo t shu t off automatically during use 4. Press start button to resume manual cleaning Unusual or odd noise Possible causes Remedies 1. Clean water/solution tank is ou t of fluid 1.
Summary of the content on the page No. 14
® Replacement parts - BISSELL SpotBot Item Part No. Part Name 1 203-7471 Dirty Water/Collection Tank (33N8 series) 2 203-7472 Dirty Water/Collection Tank (78R5 series) 3 203-7473 Dirty Water/Collection Latch (33N8 series) 4 203-7473 Dirty Water/Collection Latch (78R5 series) 5 203-7475 Clean Water Tank (33N8 series) 6 203-7476 Clean Water Tank (78R5 series) 7 203-7477 Cap & Insert 8 203-7480 Mounting Bracket 3" Tool (33N8 series) 9 203-7481 Mounting Bracket 3" Tool (78R5 series) 10 203-
Summary of the content on the page No. 15
® Warranty - BISSELL SpotBot This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will r
Summary of the content on the page No. 16
BISSELL consumer services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or write: BISSELL Homecare, Inc. PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of cleaner available. Please record your Model Number: ___________________ Please record
