Summary of the content on the page No. 1
Owner’s Manual
The Ball
Please read this manual carefully before using your DC15
Summary of the content on the page No. 2
Owners manual Important safety instructions Please read this manual 1 Assembling carefully before using 2 Using your DC15 your DC15. 3 Using your DC15 (continued) 4 Using your DC15 tools 5 Washing your filter TM 6 Emptying the clear bin TM 7 Cleaning the clear bin 8 Clearing blockages 9 Using and maintaining optional accessories 10 Using and maintaining optional accessories (continued) Wand cap 11 Troubleshooting tips Warranty and customer care Wand Brushbar On/Off Wand release button Power On/O
Summary of the content on the page No. 3
1 Assembling IMPORTANT • Ensure hose is straight when inserting wand. • Please see section 9 for usage and maintenance instructions for accessories included with some vacuums. Brush tool • If you have any questions, please call the Dyson Helpline toll free at Stair tool 1-877-397-6622 or log onto www.dyson.com Crevice tool Slide wand down inside hose until Slot wand into top of machine Wind cord counter-clockwise and Click tools into place. it clicks. and click into place. secure with clip. ti
Summary of the content on the page No. 4
2 Using your DC15 CAUTION • Please note: this machine is intended for domestic use only. Fine dust such as plaster dust or flour should only be vacuumed in very small amounts. • The brushbar will automatically stop if it becomes obstructed. • Do not press the cyclone release button while carrying the machine or it could fall and cause injury. • Ensure the cyclone is secured to the machine. • Do not shake the machine while carrying or it could fall and cause injury. Press stabilizer firmly to rel
Summary of the content on the page No. 5
3 Using your DC15 (continued) IMPORTANT • The brushbar will reset to “ON” each time you start the machine and put it in the cleaning position. • If the brushbar stops during use, please refer to the clearing blockages section. • Ensure stabilizer wheels are fully locked in place before releasing the machine. • Consult your flooring manufacturer’s recommended instructions before vacuuming your flooring, rugs, and carpets. Some carpets will fuzz if a rotating brushbar is used when vacuuming. If
Summary of the content on the page No. 6
4 Using your DC15 tools IMPORTANT • Ensure machine is in upright position before B using tools. • To protect your floors, the brushbar will not rotate A when the machine is in an upright position. • Ensure hair and loose B A clothing are kept clear of wand cap when machine is switched on. • Ensure wand cap is closed, unless using with tools. B • Powerful suction can cause the hose to `pull back’ – please take care when using the wand. • To avoid personal injury and to prevent the machine from fa
Summary of the content on the page No. 7
5 Washing your filter CAUTION • Check your washable filter regularly and wash at least every 6 months according to instructions to maintain performance. • Turn power off and unplug before washing the filter. Failure to do so could result in electric shock or personal injury. • Do not use detergent to clean filter. • Do not put the filter in the dishwasher, washing machine, tumble dryer, microwave, or near an open flame. Press button to release cyclone Lift filter release button and Separate blu
Summary of the content on the page No. 8
TM 6 Emptying the clear bin CAUTION • Turn power off and unplug before emptying the bin. Failure to do so could result in electric shock or personal injury. • Do not use the machine TM without the clear bin in place. Empty bin as soon as the level of Let the dust settle and close bin Option 1 Option 2 the MAX mark is reached at any base securely before removing Push the button as shown to Emptying into a bag is point in the bin. from bag and refitting cyclone empty directly into trash. recommend
Summary of the content on the page No. 9
TM 7 Cleaning the clear bin CAUTION • Do not use detergents, polishes, or air fresheners TM to clean the clear bin . • Do not immerse the cyclone in water. A • Ensure bin is completely dry before replacing. TM Clean shroud with a cloth or dry Cleaning the shroud (optional) Cleaning the clear bin (optional) Re-assembling the TM brush to remove lint. clear bin Ensure bin is empty (as detailed Ensure bin is empty and bin base in section 6) and bin base is is open. Holding carry handle, fit open. c
Summary of the content on the page No. 10
8 Clearing blockages CAUTION D • Turn power off and unplug before checking for blockages. Failure to do so could result in electric shock or personal injury. E • If any part of your machine becomes blocked, it may overheat and then automatically shut off. Unplug machine and leave to cool down for at least 60 minutes before clearing the blockage. • For safety, please lay the F machine on its side before G checking for blockages. • Please note: clearing A C blockages is not covered B by your machi
Summary of the content on the page No. 11
9 Using and maintaining optional accessories Low reach floor tool Mini turbine head Instructions for use For easier cleaning under Advanced turbine head removes For your safety low furniture dirt from upholstery, stairs, and the car A C A CAUTION Do not use your vacuum cleaner outdoors or on wet surfaces. If used in a garage care should be taken to wipe the B soleplate and wheels A with a dry cloth after vacuuming to clean off B D any sand, dirt, or pebbles that could damage delicate floors. Col
Summary of the content on the page No. 12
10 Using and maintaining optional accessories (continued) A Zorb carpet powder • Use Zorb for carpet cleaning Instructions for use For your safety B CAUTION Do not use your vacuum cleaner outdoors or on C wet surfaces. If used in a garage, care should be taken to wipe the soleplate and wheels with a dry cloth after D vacuuming to clean off any sand, dirt, or pebbles that could damage delicate floors. 30mins Colors may vary. E A Sprinkle Zorb onto carpet B Ensure machine is switched off C Work in
Summary of the content on the page No. 13
11 Troubleshooting Problem Potential solution tips Less than normal or no pickup • Remove and check washable filter to see if it is clean (filter should be blue in color). while vacuuming upright, or Wash filter if necessary as shown in section 5. machine turns off in use • Be sure the filter housing and airway inspection valve are snapped in securely and confirm there are no blockages. Refer to page 3 for an Less than normal or no suction • Confirm the airway inspection valve is in place and t
Summary of the content on the page No. 14
Thank you for choosing to buy a Dyson vacuum cleaner. Dyson customer care - - - If you have a question about your Dyson vacuum cleaner, call the Dyson Helpline at 1 877 397 6622 with your serial number and details of where and when you bought the cleaner. Your serial number can be found on the rating plate, which is located on the machine behind the TM clear bin . Most questions can be solved over the phone by one of our Helpline staff. If your machine needs service, call the Dyson Helpline. We
Summary of the content on the page No. 15
www.dyson.com JN.14829 PN.08898-04-01 22.06.06
