Summary of the content on the page No. 1
Wet/Dry Vac
®
with Portable Blower and
Exclusive two tank system
Owner’s Manual
Read these instructions
before operating cleaner.
Summary of the content on the page No. 2
Record and retain The HOOVER cleaner you have purchased is designed for both wet and dry pick up and also has a portable blower. The model and serial number are located on the portable blower. For your personal records, please enter the COMPLETE model and serial numbers in the spaces provided and retain this information. Model number__________________________________________ Serial number___________________________________________ It is suggested that you attach your sales receipt to this owner’
Summary of the content on the page No. 3
D A E F C B G A temporary adapter (D) may be Grounding DANGER- used to connect this plug to a 2- pole receptacle (G) if a properly Instructions Improper connection of the grounded outlet is not available. equipment-grounding conductor This appliance must be grounded. The temporary adapter should be can result in the risk of electric If it should malfunction or used only until a properly grounded shock. Check with a qualified breakdown, grounding provides a outlet (B) can be installed by a elec
Summary of the content on the page No. 4
B B B B Carton contents 1. Assembly Remove parts from tank and identify the following: 1-1 A. Outer tank B. Inner tank C. Cleaner lid and portable blower D. Caster supports (4) C A E. Casters (4) F. Caster support screws (4) I G. Reusable cartridge filter - assembled to cleaner lid B H. Small foam filter - assembled to inner tank I. 1 1/4-inch tool set includes: D hose, 2 extension wands, wet/dry G J nozzle, squeegee insert, utility nozzle, and crevice tool E J. 2 1/2-inch tool set includes:
Summary of the content on the page No. 5
1-7 1-6 1-5 E I E J G F H Attach cleaner lid Attach tool rack Attach hose, wands Rotate lid latches (E) outward. With Slide the three tabs (I) on tool rack and cleaning tool wet/dry selector (F) toward drain into slots (J) on back of cleaner lid. Push hose into hose inlet on tank; side of tank align ribs (G) on front of (To help locate the tool rack, guide twist hose to tighten or loosen tank with slots (H) on either side of lines have been added to tank lid.) connection. (See “How to use” hos
Summary of the content on the page No. 6
Extension cord Separate wet/dry 2-2 tanks instructions This feature allows you to change Use an outdoor, grounding type, from wet pick-up to dry pick-up SJT extension cord of 16 gauge (up without having to empty the tank or to 35 feet) or 14 gauge (any length). change filters. Dry debris will The extension cord must employ a collect in the inner tank and wet 3-prong grounding type plug and a A debris will collect in the outer tank. 3-pole receptacle that accepts the machine plug. Wear ear prot
Summary of the content on the page No. 7
A 2-6 2-5 A B B Removing blower Portable blower Drywall dust Rotate blower latches (A) to release The blower can be used to blow dirt For best results when picking up dry blower. Lift blower off lid (B). out of areas where it is impossible wall dust, slide wet/dry selector (A) for suction to reach. NOTE: Do not use blower handle to expose “WET/TANK INLET” (B) to lift or carry assembled cleaner and make sure no water or moisture Disconnect cleaner from while blower is attached to cleaner is in
Summary of the content on the page No. 8
Filters 3-1 3. Maintenance Do not operate cleaner without filters in place. Filters are available at your Hoover Emptying tanks Factory Service Center, Authorized After dry pick-up Hoover Warranty Dealer (Depot), on Disconnect cleaner from electrical the enclosed order form, or by outlet. writing to The Hoover Company, North Canton, Ohio, 44720. Release lid latches and remove A cleaner lid from tank. To assure that your cleaner operates at peak performance, it is To avoid back strain, do not lif
Summary of the content on the page No. 9
If you have a Service To obtain approved HOOVER problem service and genuine HOOVER parts, If a minor problem occurs, it usually locate the nearest Hoover Factory can be solved quite easily when the Service Center or Authorized cause is found by using the Hoover Warranty Service Dealer checklist below. (Depot) by: • checking the Yellow Pages Problem: Cleaner won’t run under “Vacuum Cleaners - Household” OR - • Possible Cause • checking the list of Factory • Possible Solution Service Centers
Summary of the content on the page No. 10
HOOVER et sont des marques déposées HOOVER y son marcas registradas ® ® THE HOOVER COMPANY, NORTH CANTON, OHIO THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 HOOVER and are registered trademarks ® THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 3-98 S6760 Litho USA 56514-020
