Summary of the content on the page No. 1
Summary of the content on the page No. 2
IMPORTANT SAFETY INSTRUCTIONS Read All Instructions Carefully Before Using This Appliance When using an electrical appliance, basic precautions should always be followed, including the following : To reduce the risk of fire, electric shock, or injury : WARNING - 11. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 12. Do not use outdoors or on wet surfaces. 13. Do not allow to be used as a toy. Close attention is necessary when used near children.
Summary of the content on the page No. 3
CONTENTS .................................................. CANISTER FEATURES 4 ~ 5 ................................... HOW TO USE POWER NOZZLE 6 ~ 9 .................................... HOW TO USE CLEANING TOOLS 10 .................................. HOW TO REPLACE VACUUM BAG 10 ............................................ HOW TO REPLACE FILTERS 11 ................................................... SAFETY PRECAUTIONS 12 ........................................... TROUBLESHOOTING GUIDE 13 3
Summary of the content on the page No. 4
N O I T CANISTER FEATURES POWER CONTROL HANDLE When lit, change vacuum bag or CHECK BAG check for clog in SERVICE hose FILTER POWER BRUSH When lit, change MAX HEPA filter Power Levels: (page 11) HIGH MAX 100% HIGH 75% MED Light indicates MED 50% LOW when power LOW 25% nozzle is in use. OFF OFF 0% One touch integrated wand Increase power Decrease power Power nozzle POWER BRUSH On / Off ON On / Off Button OFF Floor brush Power nozzle ➪ Please, refer to pages 6~9. DIRT
Summary of the content on the page No. 5
HOSE ADAPTER Adapter button Flexible hose • When separating the hose from the body, press the adapter buttons to release the hose. MAIN ON / OFF BUTTON On-board cleaning tools Canister body Floor brush • ON - Canister power is on and power nozzle is off. • OFF - All power is off. CORD REWIND LOOR BRUSH STORAGE Parking slot er into the parking slot on bottom or backside of unit. 5
Summary of the content on the page No. 6
HOW TO USE POWER NOZZLE OPERATION 1. Turning on the Power Nozzle 4. Carpet Height Adjustment The power nozzle can only be turned on if the Your power nozzle has six different settings to canister is also turned on (canister on / off clean a variety of carpet types and floor switch is located on the main body). The surfaces. To adjust the carpet height setting of power nozzle on / off switch is located on the the power nozzle, press the right pedal located handle. Simply press the power nozzle b
Summary of the content on the page No. 7
OPERATION 5. Warning Light / Dirt Sensor If the circuit breaker trips: Your power nozzle comes equipped with a a. Turn off the vacuum cleaner and power nozzle circuit breaker safety system that protects it then unplug the power cord. from a jammed power nozzle situation. b. Remove the object preventing the brushroll Common items that cause jammed brushrolls from turning. include socks, excessive threads, corners of c. Locate the circuit breaker switch on the back of area rugs, etc. The warning i
Summary of the content on the page No. 8
MAINTENANCE AND CARE 2. Replacing the Power Nozzle Belt 3. Replacing the Bulb IMPORTANT: Before performing any IMPORTANT: Before performing any maintenance work on the power nozzle, maintenance work on the power nozzle, always unplug the vacuum cleaner and always unplug the vacuum cleaner and disconnect the wand. disconnect the wand. To replace the power nozzle belt, you must Turn the power nozzle over and remove the first remove the brushroll (see "Removing the bottom plate by first unscrewing
Summary of the content on the page No. 9
DIAGRAM 1 REAR VIEW OF POWER WAND AND NOZZLE ASSEMBLY DIAGRAM 2 FRONT VIEW OF POWER WAND AND NOZZLE ASSEMBLY 9
Summary of the content on the page No. 10
HOW TO USE CLEANING TOOLS • Open the tool cover lid to access tools. Floor brush Tool cover lid Upholstery tool button Dusting brush Crevice tool • On-board tools can be attached either to the power handle or to the end of the wand. Floor brush: effective for hard surface cleaning (wood, tile, etc) Upholstery tool: ideal for cleaning furniture Dusting brush: (slides off the end of the upholstery tool) for shelves, tables, etc Crevice: designed to clean in tight spaces (i.e. between sofa cushion
Summary of the content on the page No. 11
REPLACING THE FILTERS Replacing the charcoal filter: • Unplug canister and remove the hose. • Open the dust cover and locate the charcoal filter behind the bag. • Remove filter case and discard used filter. • Insert new charcoal filter into filter case and re-insert case. • Close the dust cover. Dust cover lid Charcoal filter Charcoal filter Filter case Replacing the S-Class HEPA filter: • Unplug canister and remove HEPA filter cover. • Remove and discard used HEPA filter. • Insert new S-C
Summary of the content on the page No. 12
SAFETY PRECAUTIONS This vacuum cleaner should be used for normal, dry household dust and dirt. The manufacturer cannot be held responsible for any damage caused by use or operation of the vacuum contrary to these instructions. If the vacuum is wrongly operated for a purpose other than that for which it is intended, no liability can be accepted for any possible damage. • Do not vacuum areas which contain moisture • When rewinding the power cord, hold the plug or water, flammable matter, needles,
Summary of the content on the page No. 13
TROUBLESHOOTING GUIDE Please check each item below if you have trouble with your vacuum. Before checking, ensure that the vacuum is unplugged from the power supply. Problem Check Point Note • Suction power is weak. • Vacuum bag • If vacuum bag is full, replace it. • Wand or hose • If clogged or blocked, remove the object. • The vacuum does not work. • Is the hose adapter inserted • Insert it completely. into the suction opening of the vacuum completely? • When the vacuum bag is full or • Switc
Summary of the content on the page No. 14
ABOUT THIS MANUAL ABOUT THIS MANUAL VISION CREATIVE, INC.
