Summary of the content on the page No. 9
THEFT PROTECTION SWITCHING ON AND OFF Display Radio Passport Data Switching on and off Using the KeyCard supplied, you can view There are a number of methods for switching Radio Passport data such as device name, the device on or off. type number (7 6 ...) and device number in the display. Switching on and off with the ➮ Press the MENU button 8. button 2 ➮ Press the or button 7 until “READ ➮ Press the main button 2 to switch on. KC” appears in the display. The device switches on. ➮ Press the
Summary of the content on the page No. 10
VOLUME Muting Adjusting the volume You can reduce the level of the volume (mute) The volume can be adjusted in steps from 0 suddenly. (off) to 66 (maximum). ➮ Press the main button 2. ➮ To increase the volume, turn the volume “MUTE” is shown on the display. control to the right. ➮ To reduce the volume, turn the volume Cancelling the mute control to the left. ➮ Press the main button 2. or Adjusting the switch-on volume ➮ Turn the volume control 3. The volume level of the device when it is switche
Summary of the content on the page No. 11
TONE AND VOLUME Adjusting the left/right volume Tone and volume balance Note: ➮ In order to adjust the balance, press the You can make separate adjustments to the AUD button 9. bass, treble and loudness for each audio “BASS” appears in the display. source. ➮ Press the or button 7 as often as Adjusting the bass is necessary for “BAL” to appear in the display. ➮ Press the AUD button, 9. ➮ Press the or buttons 7 in order to “BASS” appears in the display. adjust the balance between left and ➮ Pr
Summary of the content on the page No. 12
DISPLAY Night-time display brightness Adjusting the display ➮ Press the MENU button 8. You can adjust the display to its location in your vehicle and to your taste. ➮ Press the or button 7 as often as is necessary for “DIM NGHT” to appear Adjusting the viewing angle in the display. ➮ Press the MENU button 8. ➮ Adjust the brightness with the key 7. ➮ Press the or button 7 as often as is necessary for “ANGLE” to appear in ➮ Press the OK button 5 or the MENU the display. button 8 to leave the
Summary of the content on the page No. 13
RADIO OPERATION Switching TA on and off Radio Operation To use the TA function: Switching to Radio Mode ➮ Press the softkey 4 indicating “TA”. If the car radio is in another operating mode: The TA function is active when “TA” appears ➮ Press the TUNE button >. in the display with light and shade reversed. To deactivate the TA function: RDS Function ➮ Press the softkey 4 indicating “TA” This device is equipped with an RDS radio again. receiver. Some FM stations transmit a signal in addition to th
Summary of the content on the page No. 14
RADIO OPERATION Setting the station Saving a station There are a number of ways to set the sta- Saving a station manually tion. ➮ Choose the desired memory level: FM I, Automatic station search FM II, FMT, M or MT. ➮ Press the or button 7. ➮ Tune in the desired station as described The next station that can be received is tuned under “Setting the station”. in. ➮ Hold down the softkey 4 indicating the position [(“ST1” - “ST6”) where the sta- Manual station tuning tion is to be stored] for longe
Summary of the content on the page No. 15
RADIO OPERATION Scanning through stations Stop the SCAN, continue listening to a station Scanning through available stations ➮ Press any button on the arrow block 7. (Radio SCAN) The scanning process is stopped, and the last You can listen to short samples of all current- station sampled continues playing. ly receivable stations. The length of the sam- ples can be set, in the menu, to between 5 Setting sample duration and 30 seconds. (Scantime) Start radio SCAN ➮ Press the MENU button, 8. To sta
Summary of the content on the page No. 16
RADIO OPERATION If you want to select another programme type, PTY-EON If you specify the programme type and start ➮ keep pressing one of the buttons seek tuning, the unit will switch from the cur- 7 until the required programme type is rent station to a station of the selected pro- displayed. gramme type. Or To select a stored programme type, Note: ● If no station is found that corresponds to ➮ press one of the softkeys 4 corre- the selected programme type, you will sponding to the “ST1” – “ST6
Summary of the content on the page No. 17
RADIO OPERATION “NO HICUT” means that the function is inac- ➮ Press the OK button 5 or the MENU tive, while “HICUT 3” indicates the strongest button 8 to leave the menu. The set- automatic reduction of treble and interference. tings are then saved. ➮ Press the OK button 5 or the MENU Changing information displayed button 8 to leave the menu. The set- tings are then saved. You can select which information is shown on the display. The upper display line (the Bandwidth selection in the presence of
Summary of the content on the page No. 18
CD OPERATION Starting CD operation and CD operation inserting the CD You can use this unit to play standard CDs ● If there is no CD in the drive with a diameter of 12 cm. Besides being able to play CDs containing audio data on the Los ➮ press the button 1. Angeles MP71, you can also play CDs con- The control unit opens. taining MP3 files. For further details, please ➮ Insert the CD with the printed side up- read the chapter entitled “MP3 mode” that wards gently into the drive until you can foll
Summary of the content on the page No. 19
CD OPERATION Fast searching (audible) Repeating tracks (REPEAT) In order to search rapidly backwards or for- ➮ Press the softkey 4 indicating “RPT”. wards The title will be repeated until RPT is deactiv- ➮ hold down one of the , or but- ated. tons 7 until the fast search backwards Stopping REPEAT of forwards starts. ➮ Press the softkey 4 indicating “RPT” Random Track Replay (MIX) again. ➮ Press the softkey 4 indicating “MIX”. Play continues as normal. “MIX CD” appears briefly on the display. T
Summary of the content on the page No. 20
MP3 MODE Fig. 1 Fig. 2 MP3 mode On the Los Angeles MP71 you can also play CD-Rs containing MP3 music files. D01 D01 MP3 is a process developed by the Fraun- T001 hofer Institute for compressing CD audio data. D02 T002 Compression allows data to be reduced to T003 T004 around 10% of their original size without a T005 noticeable loss in quality (at a bit rate of 128 D03 D04 T006 Kbit/s). If a lower bit rate is used to convert T007 T001 T001 CD audio data to MP3, you can create small- T008 T002 T00
Summary of the content on the page No. 1
Radio / CD
Los Angeles MP71
Operating instructions
Summary of the content on the page No. 2
Open here 2
Summary of the content on the page No. 3
1 2 3 4 5 6 14 9 8 13 12 11 10 7 3 PORTUGUÊS SVENSKA PORTUGUÊS FRANÇAIS ESPAÑOL NEDERLANDS ESPAÑOL ENGLISH
Summary of the content on the page No. 4
OPERATING ELEMENTS 1 button for opening the control unit 2 Button for switching the device on and off and for muting the device 3 Volume control 4 Softkeys. The function of the Softkeys depends on the contents of the dis- play at the time 5 OK button for confirming menu entries and for leaving the menu 6 DEQ button for calling up the equaliz- er menu 7 Multi-function rocker 8 MENU button, which calls up the bas- ic settings menu 9 AUD button for adjusting bass, treble, balance, fader and loudnes
Summary of the content on the page No. 5
CONTENTS Notes ............................................... 6 CD operation................................. 18 Road safety ............................................. 6 Starting CD operation and inserting Fitting ...................................................... 6 the CD ................................................... 18 Accessories ............................................. 6 Removing the CD .................................. 18 Selecting a track................................
Summary of the content on the page No. 6
NOTES Fitting Notes If you want to fit your car radio yourself, read Thank you for deciding to use a Blaupunkt the fitting and connecting notes at the end of product. We hope you enjoy using this new the guide. piece of equipment. Before using the device for the first time, Accessories please read these operating instructions. The Only use accessories approved by Blaupunkt. Blaupunkt editors are constantly working on making the operating instructions clearer and Remote control easier to understa
Summary of the content on the page No. 7
THEFT PROTECTION Note: KeyCard Theft Protection If the wrong kind of card, such as a credit card, Two KeyCards are included with your car ra- is inserted into the device, “Wrong KC” will dio. appear on the display. If one KeyCard is lost or damaged you can Remove the incorrect card, and insert a Key- obtain a replacement through your Blaupunkt Card that is known to the device. dealer. Removing the KeyCard If you use two KeyCards, the settings of the first KeyCard are adopted by the first Key- To
Summary of the content on the page No. 8
THEFT PROTECTION ➮ Press the button 7. Training a new KeyCard / Entering the master code “CHANGE” appears in the display. If you no longer have a valid KeyCard for your ➮ Remove the first KeyCard. device, and would like to train a new KeyCard: ➮ Insert the new KeyCard. ➮ Insert the new, unknown KeyCard into “LEARN OK” appears in the display. the device. To leave the menu: ➮ Close the control unit. ➮ Press the MENU button 8. ➮ If necessary, switch the device off. The radio can now be operated wi
