Summary of the content on the page No. 1
2000
D
CD RECEIVER KD-LH2000
RECEPTOR CON CD KD-LH2000
RECEPTEUR CD KD-LH2000
KD-LH2000
SOUND
U
R SOURCE F
D
VOL VOL
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 8.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-
vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación
Summary of the content on the page No. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 Locating a file or particular portion How to use the MODE (M) button ............ 3 on an MP3 disc ..................................... 21 Selecting a directory ................................. 21 LOCATION OF THE BUTTONS ............ 4 Se
Summary of the content on the page No. 4
2000 D- LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 6 7 8 9 EQ E p q w e r t y u i o ; 1 (standby/on/attenuator) button w DISP (D) (display) button 2 SEL (select) button • Also functions as SSM buttons when pressed 3 Control dial together with MODE (M) button. 4 Display window e MODE (M) button 5 Number buttons • Also functions as SSM buttons when pressed 64 /¢ buttons together with DISP (D) (display) button. 75 (up) button r FM/AM button 80 (eject) button t CD/CD-CH button 9° (down) butto
Summary of the content on the page No. 5
3 • Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. • Skips to the previous disc while listening to ATT SOUND the CD changer. 1 5 Each time you press the button, the disc number decreases, and the selected disc 6 starts playing. 2 U • Skips to the first file of the previous directory R SOURCE F while listening to an MP3 disc. Each time you press the button, you c
Summary of the content on the page No. 6
2000 D 3. Return the battery holder. Preparing the remote controller Insert again the battery holder pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) Remote sensor • Do not expose the remote sensor to strong light WARNING: (direct sunlight or artificial lighting). • Store the battery in a place where children cannot reach. Installing th
Summary of the content on the page No. 7
2000 D- BASIC OPERATIONS 1 3 2 Turning on the power 3 Adjust the volume. To increase the volume. 1 Turn on the power. To decrease the volume. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Volume level appears 4 Adjust the sound as you want. (See pages 25 – 28.) To operate the tuner (FM or AM), see pages 9 – 13. To drop the volume in a moment To play a CD, Pre
Summary of the content on the page No. 8
Changing the display pattern Canceling the display demonstration You can change the display pattern. The number of the selectable display patterns When shipped from the factory, display varies according to the playback sources. demonstration (MovieDemo) has been activated, However, the unit basically provides three main and starts automatically when no operations are display patterns for each source, and once one of done for about 20 seconds. these three patterns is selected, the same • It is re
Summary of the content on the page No. 9
2000 D- RADIO OPERATIONS Listening to the radio 2 Start searching a station. You can use either automatic searching or manual Press ¢ to searching to tune in to a particular station. search stations of higher frequencies. Searching a station automatically: Auto search Press 4 to search stations of 1 Select the band (FM1 – 3, AM). lower frequencies. FM1 FM2 FM3 AM Ex.: When the band is FM When a station is received, searching stops. To stop searching before a station is received, Last received
Summary of the content on the page No. 10
Searching a station manually: When an FM stereo broadcast is hard to Manual search receive: 1 Press MODE (M) to enter the functions mode while listening to 1 Select the band (FM1 – 3, AM). an FM stereo broadcast. “Mode” appears on the display. 2 Press MO (monaural), while “Mode” is still on the display, so FM1 FM2 FM3 AM that the MO indicator is highlighted on the display. Note: Each time you press MO, “Mono This receiver has three FM bands (FM1, FM2, On” and “Mono Off” alternately FM3). You can
Summary of the content on the page No. 11
Manual preset Storing stations in memory You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. You can use one of the following two methods to store broadcasting stations in memory. Ex.: Storing an FM station of 88.3 MHz into the • Automatic preset of FM stations: SSM (Strong- preset number 1 of the FM1 band. station Sequential Memory) • Manual preset of both FM and AM stations 1 Select the band (FM1 – 3, AM) you want to store stations into (in this FM station automatic p
Summary of the content on the page No. 12
Tuning in to a preset station 4 Repeat the above procedure to store other stations into other preset You can easily tune in to a preset station. numbers. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in Note: memory” on page 11. A previously preset station is erased when a new station is stored in the same preset number. Selecting a preset station directly 1 Select the band (FM1 – 3, AM). FM1 FM2 FM3 AM 2 Select the number (1 – 6) for the pre
Summary of the content on the page No. 13
Selecting a preset station using the Changing the display pattern preset station list By pressing DISP (D), you can change the If you forget what stations are stored in what information shown on the display. preset numbers, you can check the preset station Each time you press the button, the list, then select your desired station on the list. display patterns change as follows: 1 Select the band (FM1 – 3, AM). • When receiving an AM or FM station Large animation display FM1 FM2 FM3 AM 2 Press an
Summary of the content on the page No. 14
2000 D- CD OPERATIONS Notes: Playing a CD • When a disc is already in the loading slot, selecting “CD” as the source starts CD play. 1 Open the control panel. • When a disc is inserted upside down, the disc automatically ejects (if the control panel is open). If the control panel is closed, “Please Eject” appears. • If you change the source, CD play also stops (without ejecting the disc). Next time you select “CD” as the source, CD play starts from where playback has been stopped 2 Insert a disc
Summary of the content on the page No. 15
To go to a particular track directly Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold ¢ , Press the number button corresponding to the while playing a disc, to track number to start its playback. fast-forward the track. • To select a track number from 1 – 6: Press 1 (7) – 6 (12) briefly. Press and hold 4 , • To select a track number from 7 – 12: while playing a disc, to Press and hold 1 (7) – 6 (12) for more than 1 reverse the track. second
Summary of the content on the page No. 16
To play back tracks repeatedly (Repeat Play) To play back only intros (Intro Scan) You can play back the first 15 seconds of each You can play back the current track repeatedly. track sequentially. 1 Press MODE (M) to enter the 1 Press MODE (M) to enter the functions mode while playing a functions mode while playing a disc. disc. “Mode” appears on the display. “Mode” appears on the display. 2 Press RPT (repeat), while 2 Press INT (intro), while “Mode” “Mode” is still on the display, so is still
Summary of the content on the page No. 17
Changing the display pattern By pressing DISP (D), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: Large animation display Small animation display 1 Clock time iEQ mode Small animation display 2 (see page 19) Small animation display 3 Clock time display Small animation display 4 Notes: • When the disc title/performer is shown, the DISC indicator lights up. When the track title is shown, the TR indicator lights up. • If
Summary of the content on the page No. 18
MP3 INTRODUCTION What is MP3? Precautions when recording MP3 files on a CD-R or CD-RW MP3 is an abbreviation of Motion Picture Experts This unit can only read MP3 files that are recorded Group (or MPEG) Audio Layer 3. MP3 is simply a in the format that is compliant with ISO 9660 Level file format with a data compression ratio of 1:10 1, Level 2 or Joliet. (128 Kbps*). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD can. How are MP3 file
Summary of the content on the page No. 19
MP3 directory/file configuration ROOT 01 02 04 08 1 2 3 4 03 05 09 10 11 20 21 5 6 06 07 12 13 22 23 24 7 8 9 14 15 16 17 18 19 ROOT : Root : Directories Note: 01 There is no limit on the number of the hierarchy levels (nested directories). However, it is recommend to limit the numbers of : MP3 files hierarchy levels up to 8 for stable operations. MP3 playback/search order • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Normally th
Summary of the content on the page No. 20
2000 D- MP3 OPERATIONS Refer also to “CD OPERATIONS” on pages 14 The display changes to show the following: to 17. Playing an MP3 disc 1 Open the control panel. 2 Insert an MP3 disc into the loading slot. Ex.: When the disc contains 13 directories and The unit draws the 125 MP3 files. disc. Playback starts automatically from the first file of the first directory once disc check is completed. 3 Close the control panel by hand. Current file (track) Elapsed playing time All the files (tracks) on th
