Summary of the content on the page No. 1
CD RECEIVER
RECEPTOR CON CD
RÉCEPTEUR CD
KD-AHD39/KD-HDR30
Only for KD-AHD39
For canceling the display demonstration, see page 7.
Para cancelar la demostración en pantalla, consulte la página 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
For customer Use:
For installation and connections, refer to the separate manual.
Enter below the Model No. and
Para la instalación y las conexiones, refiérase al manual separado.
Serial No. which are located
Pour l’installation et
Summary of the content on the page No. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
Summary of the content on the page No. 3
How to use the M MODE button CONTENTS If you press the M MODE button, the unit goes into functions mode, then the number buttons and 5/∞ Control panel ................................... 4 buttons work as different function buttons. Remote controller — RM-RK50 .............. 5 Ex.: When number button 2 works as the MO (monaural) button... Getting started ................................. 7 Basic operations .................................................... 7 Radio operations .............
Summary of the content on the page No. 4
Control panel Parts identification Display window 1 5 (up) / ∞ (down) buttons w SRC (source) button 2 0 (eject) button e 4 /¢ buttons 3 (standby/on attenuator) button r AUX (auxiliary) button 4 Control dial t SEL (select) button 5 Remote sensor y M MODE button DO NOT expose the remote sensor to strong light u Number buttons (direct sunlight or artificial lighting). i KD-AHD39: EQ (equalizer) button 6 BAND button o MO (monaural) button 7 Loading slot ; SSM (Strong-station Sequential Memory) bu
Summary of the content on the page No. 5
Display window z Tuner reception indicators—ST (stereo), MO (monaural), HOLD (reception hold), HD (HD Radio™ g Status of Bluetooth device 1 broadcasting) (Device number, [1 – 5]; signal strength, [0 – 3]* ; 1 x Sound mode (preset equalizer) indicators—CLASSIC, battery reminder, [0 – 3]* ) HIP HOP, JAZZ, ROCK, POPS, USER h Tr (track) indicator c EQ (equalizer) indicator j Sub-display v Information indicators—TAG, (folder), (track/ k Bluetooth indicator 2 file, CS II encoded HD Radio signal
Summary of the content on the page No. 6
Main elements and features 1 (standby/on/attenuator) button 4 SOUND button • Turns the power on if pressed briefly or attenuates • Selects the sound mode (EQ mode.) the sound when the power is on. 5 SOURCE button • Turns the power off if pressed and held. • Selects the source. 2 5 U (up) / D (down) ∞ buttons 6 2 R (reverse) / F (forward) 3 buttons • Changes the FM/AM bands with 5 U. • Searches for stations if pressed briefly. • Changes the preset stations with D ∞. • Searches for HD Radio stati
Summary of the content on the page No. 7
@ Adjust the sound as you want. (See pages Getting started 14 – 16.) Basic operations To drop the volume in a moment (ATT) ~ Turn on the power. To restore the sound, press it again. To turn off the power Ÿ Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. (Back to the beginning) * You cannot select these sources if they are not ready or no
Summary of the content on the page No. 8
EX.: When a conventional FM broadcast is tuned in Radio operations ST indicator You can tune in to both conventional and HD Radio broadcasts. • If you want to search for HD Radio stations only, see “To search for HD Radio stations only—HD Search” on page Selected band Selected frequency 9. What is HD Radio™ broadcasting? EX.: When an HD Radio broadcast is tuned in HD Radio stations can deliver high-quality digital Flashes first then lights up when a sound—AM digital will have FM-like sound
Summary of the content on the page No. 9
2 Select the desired station frequency. To change the HD Radio reception mode While tuning in to an HD Radio broadcast, the received signals may alternate between digital and analog due to the receiving conditions. If you want to cancel this function, follow the procedure • When you press the M MODE button in step ! on page below. 8, you can use HD Search (see below) temporarily by pressing the 4 /¢ buttons even though While listening to an HD Radio station... “MANUAL” is selected for “SE
Summary of the content on the page No. 10
Storing stations in memory Listening to a preset station You can preset six stations for each band. 1 • The HD Radio multicast channels can also be preset. Station automatic presetting —SSM (Strong-station Sequential Memory) 2 Select the preset station (1 – 6) you want. 1 Select the band you want to store in. • “LINKING” appears while linking to an HD Radio 2 multicast channel. Changing the display information 3 “SSM” flashes, then disappears when automatic presetting is over. Clock: Shows t
Summary of the content on the page No. 11
About MP3 and WMA discs Disc operations MP3 and WMA “tracks” (the words “file” and “track” are used interchangeably) are recorded in “folders.” Playing a disc in the unit All tracks will be played repeatedly until you change the About the CD changer source or eject the disc. It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). These units are not compatible with MP3 discs. • You cannot pla
Summary of the content on the page No. 12
To go to the next or previous folders (only Other main functions for MP3 or WMA discs) Skipping tracks quickly during For MP3 discs: playback For WMA discs: Only possible on JVC MP3-compatible CD changer • For MP3 or WMA discs, you can skip tracks within the same folder. To locate a particular track (for CD) or folder Ex.: To select track 32 while playing a track whose (for MP3 or WMA discs) directly number is a single digit (1 to 9). To select a number from 01 – 06: 1 To select a numb
Summary of the content on the page No. 13
Changing the display information Selecting a playback mode You can use only one of the following playback modes at a time. 1 While playing an audio CD or a CD Text 1 Disc title / performer* 2 Select your desired playback mode. 7 Repeat play 1 Track title* 2 While playing an MP3 or a WMA* Mode Plays repeatedly disc TRACK RPT: The current track. • When “TAG DISPLAY” is set to “TAG ON” (see page 1 FOLDER RPT* : All tracks of the current folder. 18) 3 Album name / performer (folder name* )
Summary of the content on the page No. 14
To adjust a preset EQ mode Sound adjustments You can adjust the sound modes and store your own adjustments in memory. Using EQ mode 1 Select your desired preset mode to customize, referring to “To select a preset You can select and customize a preset sound mode suitable EQ mode” on the left, then... to the music source using the 7-band equalizer. To select a preset EQ mode The adjustable frequency level appears. 1 Only for KD-AHD39 EX.: When “FREQ 60” of “JAZZ” is selected 2 2 Select your de
Summary of the content on the page No. 15
Adjusting the sound balance Using SRS Circle Surround Auto™ (CS-A mode) 1 This function is only for KD-AHD39. SRS Circle Surround Auto™ is a surround technology 2 specially designed for car audio, and it can reproduce 5.1-channel sound through a standard 4-speaker car stereo system (with or without a subwoofer.) TM SRS Circle Surround Auto is made up of... SRS Circle Surround II™ decoder: Converts the sound of CD, AM/FM radio broadcast and other Indication [Range] 1 2 various sources into m
Summary of the content on the page No. 16
To adjust a preset mode of SRS Circle 3 Surround Auto™ You can adjust the SRS FOCUS® and the SRS TruBass® of each preset CS-A mode and store your own adjustments in memory. Adjusted settings will be stored. 1 Select your desired CS-A mode to adjust, referring to “To select a preset mode of SRS Indication [Range] Circle Surround Auto™” on page 15, then... FOCUS F (SRS FOCUS® Front) Adjust the SRS FOCUS® of the front speaker. [0 to 9] FOCUS R (SRS FOCUS® Rear) Adjust the SRS FOCUS® of the re
Summary of the content on the page No. 17
3 Adjust the PSM item selected. General settings — PSM You can change PSM (Preferred Setting Mode) items (except “SID”) listed in the table that follows. 1 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. 2 Select a PSM item. Ex.: When “DIMMER” is selected Indications Selectable settings, [reference page] DEMO DEMO ON: [Initial]; Display demonstration will be activated automatically, [7]. DEMO OFF: Cancels. Display demonstration CLOCK DISP CLOCK ON: Clock
Summary of the content on the page No. 18
Indications Selectable settings, [reference page] 1 TEL MUTING* MUTING 1/ Select either one which mutes the sounds while using a cellular phone system. Telephone muting MUTING 2: MUTING OFF: [Initial]; Cancels. • When “CD” or “CD-CH/IPOD” has been selected as the source, playback pauses during telephone muting. 2 SCROLL* ONCE: [Initial]; Scrolls the information once. Scroll mode AUTO: Repeats scrolling (5-second intervals). OFF: Cancels. • Pressing DISP for more than one second can scroll the d
Summary of the content on the page No. 19
Ÿ Select “NEW DEVICE” then enter the Bluetooth® operations Bluetooth menu. For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to see the countries ! Select a desired item. where you may use the Bluetooth® function. Preparation: Operate the device to turn on its Bluetooth function. To u
Summary of the content on the page No. 20
4 Operate the target Bluetooth device while “OPEN..” Connecting a special device is flashing on the screen. Enter the same PIN code (as entered in step 2) into In step ! on page 19... the device to be connected. 1 Select “SPECIAL.” Now the connection is established and you can use the device through the unit. The unit displays device names. The device remains registered even after you 2 Select the device you want to connect. disconnect it. Use “CONNECT” (or activate “AUTO CNNCT”) to connect
