Summary of the content on the page No. 1
CD RECEIVER KD-S7350/KD-S690
RECEPTOR CON CD KD-S7350/KD-S690
RECEPTEUR CD KD-S7350/KD-S690
KD-S7350
S
KD-S690
S
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the
cabinet. Retain this information
INSTRUCTIONS
for future
Summary of the content on the page No. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS ................... 15 How to use the M (MODE) button ............. 3 Selecting preset sound modes (C-EQ: custom equalizer) ....................... 15 LOCATION OF THE BUTTONS ............ 4 Adjusting the sound ............
Summary of the content on the page No. 4
LOCATION OF THE BUTTONS Control panel Display window a s d f gh j k l / z 1 23 4 5 6 789 p q w e r t y u io ; 1 (standby/on/attenuator) button i CD button 2 SEL (select) button o∞ (down) button 3 Control dial –10 button 4 Loading slot ; (control panel release) button 5 Display window 6 FM/AM button Display window 75 (up) button a EQ (equalizer) indicator +10 button s LOUD (loudness) indicator 84 /¢ buttons 90 (eject) button d CD–in indicator f CD indicator p DISP (display) button g FM band indi
Summary of the content on the page No. 5
3 Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. 4 Selects the sound mode (C-EQ: custom equalizer). Each time you press the button, the sound mode (C-EQ) changes. 5 Selects the band while listening to the radio. Each time you press the button, the band S changes. 6 Selects the source. Each time you press the button, the source changes. 7 Functions the same as th
Summary of the content on the page No. 6
3. Return the battery holder. Preparing the remote Insert again the battery holder by pushing it controller until you hear a clicking sound. Before using the remote controller: (back side) • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. WARNING: • Store the battery in a place which children cannot reach. If a child accidentally swallows the battery, Remote sensor immediately consult a doctor. • Do not expose the remote sensor
Summary of the content on the page No. 7
BASIC OPERATIONS 1 3 2 Turning on the power 4 Adjust the sound as you want. (See pages 15 and 16.) 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. to press this button to turn on
Summary of the content on the page No. 8
2 Adjust the minute. Setting the clock 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” or “LEVEL” appears on the display. 4 Finish the setting. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. To check the current clock time or change the CLOCK H CLOCK M display mode Press DISP (display) repeatedly. LEVEL Each time you press the button, the display mode changes as follows: 2 Adjust the hour. • During tuner operation: Frequency Clock • During CD
Summary of the content on the page No. 9
RADIO OPERATIONS To stop searching before a station is Listening to the radio received, press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Searching a station automatically: Manual search Auto search 1 Select the band (FM1 – 3, AM). Each time you press the 1 Select the band (FM1 – 3, AM). button, the band changes as Each time you press the follows: button, the band chan
Summary of the content on the page No. 10
Storing stations in memory 3 Tune in to a station you want while “M” (manual) is flashing. You can use one of the following two methods to To tune in to stations store broadcasting stations in memory. of higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations FM station automatic preset: SSM of lower frequencies You can preset 6 local FM stations in each FM • If you release your finger from th
Summary of the content on the page No. 11
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band numbers. (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 88.3 MHz into the Notes: preset number 1 of the FM1 band. • A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1 – 3, AM) you • Preset stations are erased when the power supply to want to store stations into (in this the memory circuit
Summary of the content on the page No. 12
CD OPERATIONS Note: Playing a CD When a CD is inserted upside down, “EJECT” and the CD–in indicator flash on the display and the CD Insert a CD into the loading slot. automatically ejects. The unit turns on, draws the CD and starts playback automatically. To stop play and eject the CD Press 0. CD play stops and the CD automatically ejects Note on One-Touch Operation: from the loading slot. The source changes to the When a CD is already in the loading slot, pressing tuner (you will hear the last
Summary of the content on the page No. 13
To go to a track quickly (+10 and –10 Locating a track or a buttons) particular portion on a CD 1 Press M (MODE) to enter the functions mode while playing a CD. To fast-forward or reverse the track Press and hold ¢ , while playing a CD, to fast-forward the track. 2 Press +10 or –10. To skip 10 tracks* forwards Press and hold 4 , up to the last track while playing a CD, to reverse the track. To go to the next or previous tracks To skip 10 tracks* backwards up to the first track Press ¢ briefly,
Summary of the content on the page No. 14
Selecting CD playback modes Prohibiting CD ejection You can prohibit CD ejection and can lock a CD To play back tracks at random in the loading slot. (Disc Random Play) You can play back all tracks on the CD at While pressing CD, press and hold 0 for random. more than 2 seconds. 1 Press M (MODE) to enter the functions mode while playing a CD. 2 Press RND (random), while “EJECT” flashes on the display for about still in the functions mode, so 5 seconds, and the CD is locked and cannot be that “DI
Summary of the content on the page No. 15
SOUND ADJUSTMENTS Indication For: Preset values Selecting preset sound modes BAS TRE LOUD (C-EQ: custom equalizer) USER (Flat sound) 00 00 OFF ROCK Rock or +03 +01 ON You can select a preset sound mode (C-EQ: disco music custom equalizer) suitable to the music genre. CLASSIC Classical +01 –02 OFF music Select the sound mode you want. POPS Light music +04 +01 OFF When you press the button once, the last selected sound HIP HOP Funk or rap +02 00 ON mode is recalled and applied music to the current
Summary of the content on the page No. 16
Adjusting the sound 2 Adjust the setting. To increase the level or You can adjust the sound characteristics to your turn on the loudness preference. To decrease the level or 1 Select the item you want to adjust. turn off the loudness Each time you press the button, the adjustable items Equalization pattern changes as you change as follows: adjust the bass or treble. BAS TRE FAD (bass) (treble) (fader) Ex. 1: When you adjust “TRE” (treble) VOL LOUD BAL (volume) (loudness) (balance) Indication To
Summary of the content on the page No. 17
OTHER MAIN FUNCTIONS Selecting the level display 3 Select the desired mode. You can select the level display according to your preference. AUDIO 1 AUDIO 2 When shipped from the factory, “AUDIO 2” is selected. OFF 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” or “LEVEL” appears on the display. Ex.: When you select “AUDIO 2” • AUDIO 1: Shows the audio level indicator. • AUDIO 2: Alternates “AUDIO 1” setting and illumination display. • OFF: Erases the audio level indi
Summary of the content on the page No. 18
Attaching the control panel Detaching the control panel 1 Insert the left side of the control You can detach the control panel when leaving panel into the groove on the panel the car. When detaching or attaching the control panel, holder. be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the control pa
Summary of the content on the page No. 19
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • Sound cannot be heard The volume level is set to the Adjust it to the optimum level. from the speakers. minimum level. Connections are incorrect. Check the cords and connections. • This unit does not work at The built-in microcomputer While holding SEL (select), all. may have functioned press (standby/on/ incorrectly due to noise, etc. attenuat
Summary of the content on the page No. 20
MAINTENANCE When playing a CD-R or CD-RW Handling discs Before playing back CD-Rs or CD-RWs, read This unit has been designed to reproduce CDs, their instructions or cautions carefully. CD-Rs (Recordable), and CD-RWs (Rewritable). • Use only “finalized” CD-Rs or CD-RWs. • This unit is not compatible with MP3 discs. • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, and for the following reasons: How to handle discs – Discs are dirty or scratched. When re
