Summary of the content on the page No. 1
DOUBLE DIN SIZED CD/CASSETTE RECEIVER
DPX-5010
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain
the best performance from your new double din sized CD/cassette receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated
on the warranty card, and in the space provided below. Refer to the model and
serial numbers whenever you call upon your KENWOOD
Summary of the content on the page No. 2
Contents Nuance Level Adjustment..........................................................................22 Before use DSP Bass Boost Control Level Adjustment ...............................................22 Safety precautions .......................................................................................3 Compression Control Level Adjustment ....................................................23 Handling Compact discs ...................................................................
Summary of the content on the page No. 3
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the following CD automatic changers. If you want To prevent injury or fire, take the To prevent damage to the machine, to use older changers with the unit, follow following precautions: take the following precautions: the directions below according to the type of • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative changer you own: locked in place. Otherwi
Summary of the content on the page No. 4
D I S C D I R E C T Safety precautions Cleaning the Unit Cleaning the Tape Head NOTE If the front panel gets dirty, turn off the After you have listened to many cassettes • CD-Rs and CD-RWs which have not power and wipe the panel with a dry silicon over a long period of time, magnetic powder undergone finalization processing cannot be cloth or soft cloth. from the tapes and dust accumulates on the played. (For more information on finalization tape head, causing noise and a deterioration 2CAUTION
Summary of the content on the page No. 5
Handling Compact discs Playing a CD that is dirty, scratched Storing CDs Checking New CDs for Burrs or warped can cause the sound to • Do not store CDs in areas exposed to direct When playing a new CD for the first time, check sunlight (such as a car seat or the dashboard) that there are not any burrs stuck to the skip and the unit to operate or other hot places. perimeter of the disc or in the central hole. CDs incorrectly, resulting in worsened A CD-R or CD-RW is more susceptible than a with b
Summary of the content on the page No. 6
D I S C D I R E C T Basic operations Power SRC/PWR OFF d u Turning on the power: Press the SRC (source) button. CD OPEN/CLOSE TAPE OPEN/CLOSE NOTE DSP SRC DPX-5010 DIGITAL SIGNAL PROCESSOR 7 OFF PWR Turn the power on before carrying out the following procedures. 7 OFF Turning off the power: Press the PWR OFF button for at least one second. RETURN Selecting standby mode: ANGLE VOLUME LAST ANGLE MEMORY Press the SRC button repeatedly and switch to "ALL OFF". 7 CRSC 7 SBF When "ALL OFF" is displaye
Summary of the content on the page No. 7
D I S C D I R E C T Tuner features Volume CRSC 4¢ SRC SBF Increasing Volume: Press the u button to turn up the volume. CD OPEN/CLOSE TAPE OPEN/CLOSE Decreasing Volume: DSP SRC Press the d button to turn down the volume. DPX-5010 DIGITAL SIGNAL PROCESSOR 7 OFF PWR 7 OFF RETURN ANGLE VOLUME LAST ANGLE Attenuator MEMORY 7 CRSC 7 SBF This function allows you to turn down the volume quickly. ATT FNC Turning Attenuator On/Off: FM+ EQ COMPRESSION SFC POSITION , 7 NAME.S DIGITAL X OVER DISC KBS DBB ROOM
Summary of the content on the page No. 8
Tuner features Tuning Preset Tuning You can recall a station being preset in preset station buttons 1 Press the SRC (source) button repeatedly to select the tuner (#1-6). mode. "TUNER" is displayed when the tuner mode has been selected. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. 2 Press either the FM or AM button to select the band. The number of the recalled station is displayed. Each time you press the FM button, the band switches between the FM
Summary of the content on the page No. 9
Name Preset mode ends. Station Name Preset (SNPS) Also, if you make no input for 10 seconds, the name will be You can assign names to radio stations with the Station Preset stored up to the point that you have entered, and the mode Memory. Up to 30 stations can be assigned names. ends. 1 NOTE Adjust the frequency to the station whose name you want to enter. • You can assign names to up to 30 FM/AM stations in all. • Station names remain stored even if the reset button is pressed. NOTE • If you
Summary of the content on the page No. 10
D I S C D I R E C T Tuner features Cassette player features Station Name Preset Play (SNPP) DISP TAPE OPEN/CLOSE SRC You can search for the station for any station if its name has been preset using Station Name Preset. CD OPEN/CLOSE TAPE OPEN/CLOSE 1 Press the SBF button for at least one second. DSP SRC “SBF SNPS” will be displayed once the station name preset DPX-5010 DIGITAL SIGNAL PROCESSOR 7 OFF PWR 7 OFF play mode is entered. The names of the stations stored in the band currently listened t
Summary of the content on the page No. 11
Playing Cassette Tapes Fast Forwarding and Rewinding Cassette Tapes Loading and Playing Cassettes: Fast Forwarding Tapes: Press the TAPE OPEN/CLOSE button to slide open the front Press the FM button. panel, showing the cassette (insertion) slot. Holding the Rewinding Tapes: cassette with the tape exposed to the right, insert it in the slot. Press the AM button. The control panel will be shown, and the tape will start playing. Canceling: The indicator lights up when a cassette has been loa
Summary of the content on the page No. 12
Cassette player features Using Direct Program Search System (DPSS) Blank Skip Skip forward or backward to other tracks during playback. Automatically fast forward to the beginning of the next track when long blank spaces (10 seconds or more) are detected, Skipping to Beginning of Current Track or to Previous Tracks continuing tape playback. The B.S indicator lights up when (Rewind DPSS): blank skip is turned on. Press the 4 button. Turning Blank Skip On/Off: Press once to rewind to the beginning
Summary of the content on the page No. 13
D I S C D I R E C T CD/External disc control features Turning Music Repeat On/Off: Press the REP button to switch music repeat on/off. DISP/NAME.S CD OPEN/CLOSE SBF SRC The REP indicator lights up when music repeat is turned on. Canceling Music Repeat: CD OPEN/CLOSE TAPE OPEN/CLOSE Press either the REP or PROGRAM button. DSP SRC DPX-5010 DIGITAL SIGNAL PROCESSOR 7 OFF PWR NOTE 7 OFF Music repeat "knows" where a track begins by detecting the blank space preceding it (the space between tracks). Ho
Summary of the content on the page No. 14
When a unit equipped with an O-N switch is to be connected, OPEN/CLOSE button, press this button for at least three seconds please also see the instruction manual of this unit. to eject the CD. Set the O-N switch to "N". "N"-operation will be set. 2CAUTION When a unit that is not equipped with an O-N switch, or the • Do not attempt to insert a CD into the slot if another one is changer switching unit "KCA-S200" is connected, "O"- already there. operation will be set. • The eject function will o
Summary of the content on the page No. 15
Playing Other Disc mode Track time This function permits the connection of optional players and the playing of discs other than the loaded CD (in the current Total disc playing time (CD only) unit). Disc name (DNPS) Playing Discs: Press the SRC button repeatedly to select the external disc Disc title (Units featuring CD text/MD only) control mode. Track title (Units featuring CD text/MD only) The disc will start playing. NOTE Character The external disc control mode will differ, depending on the
Summary of the content on the page No. 16
CD/External disc control features Play starts at the beginning of the displayed disc. Track Search NOTE Search forward or backward through the tracks on the disc until "LOAD" is displayed when discs are being exchanged on the disc you reach the one that you want to listen to. changer. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, a
Summary of the content on the page No. 17
The track starts playing. Track / Disc Repeat Canceling Direct Track Search While It Is Operating: Repeat playing the track or the disc currently being listened to. Press the 38 button. Turning Repeat Play On/Off: NOTE Press the REP button to switch repeat track/disc play on and You cannot use the direct track search function while doing track off as follows: or disc scans or using random or magazine-random play. Track Repeat ON Disc Repeat ON (Function of disc changers) Track/Disc Repeat OFF Di
Summary of the content on the page No. 18
CD/External disc control features Disc Scan (Function of disc changers) Magazine Random Play (Function of disc changers) Successively play the beginning of each disc on a changer until Play the tracks on all the discs in the disc changer in random you find the one that you want to listen to. order. Starting the disc scan: 1 Press the M.RDM button to switch magazine random play on Press the D.S button. The D.SCN indicator lights up and the and off. first 10 seconds of each disc will be played, in
Summary of the content on the page No. 19
Text / Title Scroll 2 When the name appears for the disc you want to play Press the SBF button. This function allows the text/title display to be scrolled. The disc whose name is displayed will be recalled, and the disc 1 Press the DISP button to display the disc title or the track title. name preset play (DNPP) mode will end. 2 To cancel DNPP mode: Press the SCROLL button. The display of the text will be scrolled once. Press the SBF button for at least one second. The disc name preset play (DNP
Summary of the content on the page No. 20
CD/External disc control features NOTE Presetting Disc Names Direct Alphabet Input Store the names of discs to be displayed when played. (Function of remote) You can directly input letters using the number/letter entry 1 Play the disc whose name you want to preset. buttons on the remote. Example: Use the following table to enter the name "DANCE". NOTE • This function is available only for the CD player of this unit and Button to press # Times pressed Character disc changers that feature the Dis
