Summary of the content on the page No. 1
PLCD65WXMU
OWNER’S MANUAL
Mobile Audio System
• PLL Synthesizer Stereo Radio
• CD Player/MP3 Player/WMA Player
• Automatic Memory Storing
• Full Detachable Panel
• Preset Equalization
• Electronic Shockproof (ESP) Function
• USB Interface
• Auxiliary Input Function
• Remote Control
www.pyleaudio.com
Summary of the content on the page No. 2
CONTENTS Installation ...........................................3 Pausing playing................................. 11 Take out screw before installation.........3 Previewing all tracks ......................... 11 DIN Front-Mount (Method A) ................3 Repeating the same track ................. 11 Installing the unit.................................3 Playing all tracks in random .............. 11 Removing the unit...............................4 Selecting tracks by AS/PS/D-AUD DIN Rear-Mo
Summary of the content on the page No. 3
INSTALLATION Notes: TAKE OUT SCREW BEFORE INSTALLATION • Choose the mounting location where Before install the unit, please remove the the unit will not interfere with the two screws. normal driving function of the driver. Take out screw before installation • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. Th
Summary of the content on the page No. 4
INSTALLATION grounding of the unit. Sleeve Note to install the short threading L Key Outer Trim Ring terminal of the mounting bolt to the back Front Panel of the unit and the other long threading terminal to the dashboard. Spring Washer Hex Nut Metal Strap R Key Mounting Bolt Plain Washer Tapping Screw 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so exa
Summary of the content on the page No. 5
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side view showing Screw Holes marked T, N Factory Radio Screw Mounting Bracket Screw Dashboard or Console To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw h
Summary of the content on the page No. 6
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL Precautions when handing 1. Press the release button ( ) on the 1. Do not drop the front panel. front panel and pull off the front panel. 2. Do not put pressure on the display or control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may Release Button result in poor electrical contact. 4. If any dirt or foreign substances adhered on the contacts, they ca
Summary of the content on the page No. 7
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR (BLACK) AUX IN CABLE Rch RED FUSE RED IGNITION Lch WHITE SWITCH (ACC+) FUSE MEMORY YELLOW BACK-UP (B+) (GREY) Rch RED RCA CABLE BLACK GROUND (B–) Lch WHITE POWER BLUE ANTENNA WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Lch REAR Rch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 7
Summary of the content on the page No. 8
OPERATION LOCATION OF KEYS 17 7 18 15 10 5 8 11 9 4 24 16 13 19 6 1 20 21 22 14 23 2 3 12 8
Summary of the content on the page No. 9
OPERATION SWITCHING ON/OFF THE UNIT MUTE Switch on the unit by pressing any button Press MUT button (3) to mute down the (except button (7) and button (4)). sound instantly. If any button is pressed When system is on, press POWER button in the mute state, the mute state is (9) to turn off the unit. released. FACEPLATE RELEASE EQUALIZATION Press button (7) to detach the removable Press and hold EQ/REC button (19) for faceplate. several seconds to turn on equalization function and to select de
Summary of the content on the page No. 10
OPERATION • SELECTING STATION CD OPERATION Press TUNE/TRACK button (17) or • SWITCHING TO CD MODE TUNE/TRACK button (16) If there is no CD inserted in the driver: shortly to activate automatic seek function. Press for several seconds Gently insert the CD with the printed until “MANUAL” appears on the side uppermost into the CD display, the manual tuning mode is compartment until you feel some selected. If both buttons have not resistance. The CD is drawn into the been pressed for sev
Summary of the content on the page No. 11
OPERATION MP3 OPERATION => “Searching Directory or File Name”=> “Navigation” from root by • SWITCHING TO CD (MP3) MODE TUNE/TRACK UP/DOWN buttons => If there is no MP3 disc inserted in the “Navigation” from current directory by driver: TUNE/TRACK UP/DOWN buttons. Gently insert the MP3 disc with the • Searching Track Directly printed side uppermost into the disc Press AS/PS (D-AUD) button for slot (5) until you feel some resistance. one The MP3 disc is drawn into the driver time. It enters into “
Summary of the content on the page No. 12
OPERATION • Searching From Root Directory KEY Assigned IN Searching mode(Table 1) Press AS/PS (D-AUD) button for three times. The unit searches file or AS/PS Mode Select directory from root by BND/LOU ENTER TUNE/TRACK UP/DOWN buttons. (D-DIR icon turns on if the name is M1 A, B, C, 1 directory). Display will list all available M2 D, E, F, 2 directories and songs. Select the M3 G, H, I, 3 desired directory/songs by using TUNE/TRACK UP/DOWN buttons M4 J, K, L, 4 and BND/LOU (ENT) button to confirm
Summary of the content on the page No. 13
OPERATION in the device, the operation is the same 1. Folder: 1024 max. with the MP3 operation described above. 2. File: 4096 max. 3. Depth of folder: 8 layers Note: • The main unit can only support the 4. Size: 1 GB standard USB-memory disc which is CAUTION: approved by Microsoft. When there are important files in the USB • USB MP3 player is not a standard which device, do not connect it to the main unit means different brand name or different to play. And don't play the CD-R/RW disc models hav
Summary of the content on the page No. 14
REMOTE CONTROL HANDSET 1 7 4 3 8 9 6 5 13 2 12 10 11 14 15 16 FUNCTION KEYS & CONTROL 1. PWR = Power ON/OFF Button 2. DSP (0) = Display Button (_, –, +, 0 For MP3/WMA Operation ) 3. SEL = Sound Mode Select Button (Character Shift Right For MP3/WMA Operation ) 4. VOL = Volume Up Button [Character Select (A, B ~ 8, 9, 0) For MP3/WMA Operation] 5. VOL = Volume Down Button [Character Select (A, B ~ 8, 9, 0) For MP3/WMA Operation] 6. BND (LOU/ENT) = Band Select Button (When pressed shortly) Loudness
Summary of the content on the page No. 15
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output Power : 4 x 50 Watts Current Drain : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 45 dB Frequency Response : 40 Hz - 18 KHz RADIO FM Frequency Coverage : 87.5 to 107.9 MHz IF : 10.7 MHz Sensitivity (S/N = 30 dB) : 4 µ V Stereo Sepa
Summary of the content on the page No. 16
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot be Presence of CD disc inside Remove the disc in the player, loaded or eje
