Summary of the content on the page No. 1
10 R - 02 1011
4
Summary of the content on the page No. 2
This radio is equipped with the most advanced "TOUCH SENSE PANEL", so that it is easy and convenient to use while driving. Here are some tips to show you how easy it is to use this touch sense panel: Tips Using a very light touch on the radio panel will activate that feature. You will not need to "PRESS" hard on the panel to make this radio change features. The power button along with some of the buttons that have dual functions, will need to be "TOUCHED" from 2 to 3 seconds to make the change.
Summary of the content on the page No. 3
WARNINGS When Driving USE OF CONTROLS OR ADJUSTMENTS OR Keep the volume level Iow enough to aware of PERFORMANCE OR PROCEDURES OTHER the road and traffic conditions. THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION CAUTION EXPOSURE. In some countries, it's unlawful to operate a DO NOT OPEN COVERS AND DO NOT vehicle while video is displayed in the REPAIR BY YOURSELF PLEASE REFER driver's viewing area. Please always switch SERVICING TO A QUALIFIED the unit's display to "Font Type Dis
Summary of the content on the page No. 4
E - 3 DISC AND FORMAT SUPPORTS This unit can play various video/audio format Unsupported Discs which stored into Disc/USB or SD card on 8 cm Disc Media Player. CDV, CDI, CDG, LD The following chart helps you to check if a MultiMedia RAM disc is supported by this unit, as well as what functions are available for a given disc type. Note on Region Code Disc format MultiMedia players and MultiMedia Video discs Have their own Region Code numbers. This unit Digital Versatile Discs (MultiMedias) Can
Summary of the content on the page No. 5
182mm 53mm INSTALLATION The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your customer car audio dealer or a company suppling kits. If you are not sure how to install this unit correctly, have it installed by a qualified technician. To attach the front panel back to the unit 3 1 Trim Plate chassis, firstly join the right guide block hole to the right cylinder (Step 1 ), then join the left guide block ho
Summary of the content on the page No. 6
CONNECTING THE SYSTEM About The Reverse Wire For About Parking Wire Back Up Camera System CAUTION If user connected a back up camera system In order to avoid any accident, the driver must to this unit, when the vehicle is in reverse not watch video while driving. This unit is Gear (Back Up mode), the front in-dash TFT designed to not allow watching moving video display will automatically switch to Back Up while driving. Park your car in a safe place and Camera Video signal regardless whatever en
Summary of the content on the page No. 7
SUB-W OUT SUB WOOFER WHITE RCA TO RCA CABLE (NOT INCLUDED) REAR LINE OUT AMP RCA TO RCA CABLE (NOT INCLUDED) RED CONNECTING THE SYSTEM Wiring Diagram ANTENNA ANTENNA EXTENDER JACK CABLE BLACK L FRONT LINE OUT RCA-TO-RCA CABLE WHITE R (not supplied) BLACK REAR SUB-W OUT AMP RED BACK UP CAMERA IN OR VIDEO IN YELLOW VIDEO IN ISO CONNECTO SOCKET VCR or MultiMedia AUDIO IN (RIGHT) RED (See Figure 1) AUDIO IN R or GAME CONSOLE AUDIO IN (LEFT) WHITE AUDIO IN L ISO MALE CONNECTOR VIDEO OUT VIDEO OU
Summary of the content on the page No. 8
THE FUNCTIONS OF MAIN UNIT AV IN F L m d s DISC RESET SLOT SLOT Decriptions No. Item RELEASE Press this button to open the control panel. AUDIO MENU Short press this button to access into the Audio Menu mode. POWER Press this button or any other button on the front panel (except Release button) to turn the unit on. Hold & press this button again to turn the unit off. ENCODER Rotate the Encoder Volume Knob to increase and decrease the VOLUME KNOB volume. ( The Maximum volume level is “46”.) BAND
Summary of the content on the page No. 9
THE FUNCTIONS OF MAIN UNIT DISP Under Media playback mode, short press this button to switch d (DISPLAY) between OSD display or Video display mode. MUTE Short press this button to turn the Mute On/Off. LIST Under tuner mode,press this button to Show The List of stored station. Under the Media playback mode, press this button to list the searching of Tracks or Files on the Media playback mode. Under the MultiMedia/MP4 mode, press this button to list the L searching of MultiMedia Root Menu or File
Summary of the content on the page No. 10
THE FUNCTIONS OF REMOTE CONTROL 10 2 1 8 9 4 5 13 11 14 6 12 17 L 15 19 18 3 20 21 24 16 25 22 7 26 23 Decriptions No. Button Item POWER ON Press this button to turn On / Off the unit. 1 OFF Press this button to turn the Mute On / Off. 2 MUTE AUDIO MENU Press this button to enter into the Audio Menu mode. AUDIO 3 SYSTEM MENU Hold & press this button to enter into the System Menu mode. SOURCE Press this button to enter into the SOURCE mode. 4 5 VOLUME + Press this button to increase the volume.
Summary of the content on the page No. 11
THE FUNCTIONS OF REMOTE CONTROL Under the tuner mode, press this button access Auto Seek mode. 11 Under the media playback mode, press this button to skip backward of the previous chapter. Under the tuner mode, press this button access Auto Seek mode. 12 Under the media playback mode, press this button to skip forward of the next chapter. 13 ENTER/OK Use this button to confirm the selection. Press this button to Pause / Resume Play the music under 14 PLAY/PAUSE media playback mode. Press this bu
Summary of the content on the page No. 12
E - 11 ADJUST AUDIO SETTINGS Press Button to access the Audio Menu. FADER The below Audio Setting can be select: User has 5 seconds to use the to adjust the Fader between the front and rear speakers BASS (Bass Level) from R12 (full rear) to F12(full front).“C00” User has 5 seconds to use the to adjust represents an equal balance between the front the desired Bass level range from -6 to +6. and rear speakers. TREBLE (Treble Level) SUB-W (Subwoofer) User has 5 seconds to use the to adjust Turn the
Summary of the content on the page No. 13
E - 12 ADJUST SYSTEM MENU SETTINGS [ ] MENU (System Menu) m VOLUME PGM (Programmable Turn-on Volume) Hold & press the m Button to get into the This option allows the adjustment of the volume System Menu. User can use to level of the radio will automatically assume navigate thru the menu setting & rotate to when turning on. To program a specific turn on adjust the setting. volume level, use the to select “VOLUME DIMMER LEVEL” level from 00 to 46. Turn the to adjust the TFT Backlight level TI
Summary of the content on the page No. 14
E - 13 TUNER OPERATIONS [ ] f FUNCTION BUTTON BAND BUTTON Press the Button under Tuner mode, the Press the BAND button to change between FM F bands and or AM(MW) bands. below functions are available for Tuner mode: [ ] LIST BUTTON MANUAL Use this funtion to saved the L current frequency to memory STORE Press Button to get into the Preseted L station. stations list, and user can use the to AUTO After Auto Stored & saved the 6 select which preseted station he would listen STORE strongest
Summary of the content on the page No. 15
E 1 -4 ABOUT RDS AF (Alternate Frequencies) NOTE If the radio signal comming from the current This unit default at USA Tuner Area. RDS station is poor, you can turn on the AF function only activated after selected the (Alternate Frequency) function to let the unit Tuner Area to “ Europe”. search for another station with stronger signal, but with the same program identification as the TIPS current station automatically. Please refer Tuner operation “ FUNCTION” for details how to select the
Summary of the content on the page No. 16
E - 15 MEDIA PLAYER OPERATIONS (Disc/USB/SD Card) Album Up General Operation Under List Search mode, press Track Up/Down as folder up/down on the unit. [ ] S SOURCE BUTTON Press s button to select DISC, USB, SD 00:00:16 /...F1 064KBPS/T01 MENUETTO.WMA 01/22 CARD. The unit will automatically start .. Filter playback. T01 MENUETTO Repeat : Off T02_1KHZ_SINE_W Mode : Normal [ ] T03 17HZ SINE W PLAY/PAUSE BUTTON T04_127HZ_SINE_ Press button to pause the music. Press T05 997HZ SINE Music Play
Summary of the content on the page No. 17
E - 16 MEDIA PLAYER OPERATIONS (Disc/USB/SD Card) [ ] TRACK/FILE SELECT Insert the SD Card Use TRACK/FILE UP ( ) or TRACK/FILE DOWN ( ) button to move to the next track on the Disc mode. The selected track number will appear on the display. Press and hold the button for more than one second to fast forward or fast rewind through the media. Media playback mode will resume to normal Front Back play when the button is released. Insert the USB Stick Mode Change to SD Card After an SD card is i
Summary of the content on the page No. 18
E - 17 MULTIMEDIA OPERATION Once a MultiMedia disc is inserted into the unit, [ ] L LIST BUTTON the unit will automatically start the playback L Under the MultiMedia playback mode, press from the beginning of the disc, and then the button can access to the MultiMedia Root MultiMedia MENU or ROOT or TITLE in the menu. MultiMedia disc will appear on the TFT monitor [ ] TRACK SELECT and “ROOT” will be displayed on the TFT of the 1. Press these buttons to skip forward to the unit. beginning
Summary of the content on the page No. 19
AV-In Mode AV in-2 Select the AV Mode Connect the external signal to the RCA line in Your can connect up to 1 AV device, press s jack located at the rear of the unit , then press Button to enter into the AV mode: Button to select AV in-2. s AV in - 1 = Front panel AV in (Optional) AV in - 2 = RCA back of unit (Optional) TIPS AV in-1 If there is no any external AV System input, This unit is allowed to connect with external then the TFT will be show “ NO VIDEO Audio/Video system such like Digita
Summary of the content on the page No. 20
SPECIFICATIONS TFT Screen Section Screen Size: 3.2”(Measured Diagonally) Screen Type: TFT Liquid Crystal Display active matrix Resolution: 320 x 240 MultiMedia / CD Section Compatible Disc/Format See “ Disc Note” for more details description Signal to Noise Ratio >90dB Dynamic Range >90dB Frequency Response 20Hz to 20Khz +/-3dB 2 Channel (Stereo) >60dB @1khz Channel Separation Video Section NTSC / PAL/SCEAM Color System Composite 1.0 Vp-p (+/- 0.2) 75 - ohm Video Output Composite 1.0 Vp-p (+/-
