Summary of the content on the page No. 1
CD RECEIVER KD-S30
RECEPTOR CON CD KD-S30
RECEPTEUR CD KD-S30
S
COMPACT
DIGITAL AUDIO
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con la demostración en indicación. Para cancelarla, consulte la página 8.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-
vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase a
Summary of the content on the page No. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS ................... 16 How to use the MODE button ................... 3 Selecting preset sound modes (C-EQ: custom equalizer) ....................... 16 LOCATION OF THE BUTTONS ............ 4 Adjusting the sound ..........
Summary of the content on the page No. 4
LOCATION OF THE BUTTONS Control panel Display window 1 Control dial ;∞ (down) button 2 (standby/on/attenuator) button 1 (reverse) button 3 SEL (select) button 4 EQ (equalizer) button Display window 5 FM/AM button a Main display 6 CD button s EQ (equalizer) indicator 7 Display window d Sound mode (C-EQ: custom equalizer) 80 (eject) button indicators 95 (up) button ROCK, CLASSIC, POPS, HIP HOP, JAZZ, ¡ (fast-forward) button USER p (control panel release) button • also works as level meter during p
Summary of the content on the page No. 5
3 Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. 4 Selects the sound mode (C-EQ: custom equalizer). Each time you press the button, the sound mode (C-EQ) changes. 5 Selects the band while listening to the radio. Each time you press the button, the band S changes. 6 Selects the source. Each time you press the button, the source changes. 7 Functions the same as th
Summary of the content on the page No. 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no (back side) obstacle in between. WARNING: • Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, Remote sensor consult a doctor immediately. • Do not recharge, short, disasse
Summary of the content on the page No. 7
BASIC OPERATIONS 2 1 3 4 Adjust the sound as you want. (See Turning on the power pages 16 and 17.) 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. to press this button to turn on
Summary of the content on the page No. 8
Canceling the display 3 Select “DEMO OFF.” demonstration When shipped from the factory, display demonstration has been activated, and starts DEMO OFF DEMO ON automatically when no operations are done for about 20 seconds. • It is recommended to cancel the display demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
Summary of the content on the page No. 9
4 Finish the setting. Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 19.) To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press the button, the display mode changes as follows: 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on • During tuner operation: the display. 2 Adjust the hour. Frequency Clock 12 • During CD operation: Elapsed playin
Summary of the content on the page No. 10
RADIO OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching for a station manually: Manual search Searching for a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). Each time you press the 1 Select the band (FM 1 – 3, AM). button, the band changes as Each time you press the follows: button, the
Summary of the content on the page No. 11
Storing stations in memory 3 Tune in to a station you want while “M” (manual) is flashing. You can use one of the following two methods to To tune in to stations of store broadcasting stations in memory. higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM • If you release your finger from the button, You can preset 6 local FM stations i
Summary of the content on the page No. 12
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. numbers. Ex.: Storing FM station of 92.5 MHz into the Notes: preset number 1 of the FM1 band. • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to 1 Select the band (FM1 – 3, AM) you the memory circuit is interrupted (for example, want to
Summary of the content on the page No. 13
CD OPERATIONS The display changes to show the following: Playing a CD Current source indication 1 Open the control panel. CD indicator Note on One-Touch Operation: Total playing time Total track number When a CD is already in the loading slot, pressing of the inserted disc of the inserted disc CD turns on the unit and starts playback automatically. 2 Insert a CD into the loading slot. The unit turns on, draws Current track the CD and starts Elapsed playing time number playback automatically. 3 C
Summary of the content on the page No. 14
To stop play and eject the CD To go to a particular track directly Press 0. Press the number button corresponding to the CD play stops and the control panel flips down. track number to start its playback. The CD automatically ejects from the loading slot. The source changes to the tuner (you will hear the last received station). • If you change the source, the CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD play starts from where playback has been • To s
Summary of the content on the page No. 15
To play back tracks repeatedly Prohibiting CD ejection (Track Repeat Play) You can prohibit CD ejection and can lock a CD You can play back the current track repeatedly. in the loading slot. 1 Press MODE to enter the functions mode while playing a While pressing CD, press and hold CD. for more than 2 seconds. 2 Press RPT (repeat), while “MODE” is still flashing on the display, so that “TRK RPT” appears on the display. Each time you press the button, “NO EJECT” flashes on the display for about 5
Summary of the content on the page No. 16
SOUND ADJUSTMENTS Selecting preset sound modes Indication For: Preset values BAS TRE LOUD (C-EQ: custom equalizer) USER (Flat sound) 00 00 OFF You can select a preset sound mode (C-EQ: ROCK Rock or +03 +01 ON custom equalizer) suitable to the music genre. disco music CLASSIC Classical +01 –02 OFF Select the sound mode you want. music Each time you press the POPS Light music +04 +01 OFF button, the sound modes HIP HOP Funk or rap +02 00 ON change as follows: music JAZZ Jazz music +02 +03 OFF USER
Summary of the content on the page No. 17
1 * When you adjust the bass, treble, or loudness, the Adjusting the sound adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.” You can adjust the sound characteristics to your 2 * If you are using a two-speaker system, set the fader preference. level to “00.” 3 * Normally the control dial works as the volume 1 Select the item you want to adjust. control. So you do not have to select “VOL” to Each time you press the adjust the volume level. 4 button,
Summary of the content on the page No. 18
OTHER MAIN FUNCTIONS Changing the general settings 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. (PSM) 5 Finish the setting. You can change the items listed in the table on page 19 by using the PSM (Preferred Setting Mode) control. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 19.) 2 Select the PSM item you want to adjust. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 18 EN
Summary of the content on the page No. 19
Preferred Setting Mode (PSM) items • For detailed operations of each PSM items, refer to the pages listed in the table. Factory-preset See Indications Selectable values/items settings page DEMO Display demonstration DEMO OFF DEMO ON DEMO ON 8 1 – 12 1 (1:00) 9 CLOCK H Hour adjustment 00 – 59 00 (1:00) 9 CLOCK M Minute adjustment OFF ON ON LEVEL Level display 19 AUTO OFF DIMMER Dimmer mode AUTO 19 ON LOW PWR HIGH PWR HIGH PWR 19 AMP GAIN Amplifier gain control To select the level meter—LEVEL To s
Summary of the content on the page No. 20
Attaching the control panel Detaching the control panel 1 Insert the right side of the control You can detach the control panel when leaving panel into the groove on the panel the car. When detaching or attaching the control panel, holder. be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the left side of the control pa
