Summary of the content on the page No. 1
PCT2485
Touch LED LCD Monitor
USER'S GUIDE
www.planar.com
Summary of the content on the page No. 2
Content Operation Instructions...................................................................................................................................................1 Unpacking Instructions .................................................................................................................................................2 Safety Precautions................................................................................................................................
Summary of the content on the page No. 3
Operation Instructions Thank you for purchasing the PCT2485 multi-touch, edge-lit LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This has been tested and found compliant with the limits for a Class B digital device, LED Monitor pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. Th
Summary of the content on the page No. 4
Unpacking Instructions Remove the Touch LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between 15° leaning forward and 70° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: Turn off the product before cleaning. Touch screen surface may be cleaned using
Summary of the content on the page No. 5
Package Overview Touch LED LCD Monitor Power Cord VGA Signal Cable Audio-in Cable USB Cable (A to B) HDMI Cable Touch Pen Cable Wrap User’s Guide Cleaning Cloth 3
Summary of the content on the page No. 6
Front View of the Product ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① Webcam LED indicator Webcam ② ③ Microphone Scroll Down/ Adjust Decrease/ Picture Mode/ Auto * ④ ⑤ Input select/ Confirm Selection LED Indicator ⑥ ⑦ Power On/ Off Scroll UP/ Adjust Increase/ Audio Adjust/ Mute * ⑧ ⑨ OSD Turn On/ Off * Hot keys Instructions please see “Using the OSD Menu” on page 8. 4
Summary of the content on the page No. 7
Rear View of the Product ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ Power Input ① ② DisplayPort Input (DisplayPort 20 pin) VGA Input (D-Sub 15 pin) ③ ④ HDMI input (HDMI 19 pin) Audio Input ⑤ ⑥ Up-stream USB port (to PC) USB port-A (support USB 2.0 plug play device) ⑦ ⑧ USB port-B (support USB 2.0 plug play device) Headphone Jack ⑨ 5
Summary of the content on the page No. 8
Quick Installation Connect either VGA, HDMI or DisplayPort Video Source from the monitor to the computer. 1. Make sure both monitor and computer are powered OFF. Please note. The monitor ships with only VGA and HDMI cables. DisplayPort cable may be sourced separately from a cable supplier. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3. Connect the USB cable from the computer to the monitor. 4. Connect power cord to a properly grounded AC o
Summary of the content on the page No. 9
Webcam Installation 1. Download the free “Instant messaging software” such as Yahoo Messenger, or Skype from the Internet. Complete the installation. 2. Use the USB 2.0 cable (included with the monitor) to connect the monitor to one of the USB 2.0 ports of the computer. 3. Windows will automatically search for the camera, and proceed with the installation of the driver. 4. Connect one end of the Microphone cable to the “Microphone in” port of the computer, and connect the other end to th
Summary of the content on the page No. 10
Basic Operation and Calibration/Reset Instructions Before using the Touch LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the Touch LED LCD Monitor on/off: Press Power button on the front right side. The power LED indicator light will be blue when the Touch LED LCD Monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the Touch LED
Summary of the content on the page No. 11
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 10 seconds to lock all 5 buttons. The Touch LED LCD Monitor will show a “POWER BUTTON LOCKED” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. PCT2485 Calibration/Reset Instructions: The PCT2485 is available with USB connection. It is Microsoft® Windows® 7, 8 HID (Human Interface Device) compatibl
Summary of the content on the page No. 12
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your Touch LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu. Short Cuts Function from the button(s) AUTO IMAGE ADJUST: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. CONTRAST: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast. B
Summary of the content on the page No. 13
INPUT SELECT: When Input Select is pressed, change Input signal to D-SUB, HDMI, DISPLAY PORT or AUTO. AUDIO ADJUST: To adjust the audio functions. VOLUME: To adjust the volume of speaker output. MUTE: To turn the Mute ON/OFF. AUDIO INPUT: When in HDMI input, select where the audio source comes from AUDIO IN or HDMI. When in DisplayPort input, select where the audio source comes from AUDIO IN or DP. COLOR ADJUST: To select the color for improving brightness and color saturation b
Summary of the content on the page No. 14
SETUP MENU: To set up LANGUAGE SELECT, OSD POSITION, OSD TIME OUT, OSD BACKGROUND and LED mode. LANGUAGE SELECT: To allow users to choose from available languages. OSD POSITION: Press ▲ or ▼ button to select between horizontal and vertical OSD Position adjustment. H. POSITION: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. POSITION: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD TIME OUT: To automatic
Summary of the content on the page No. 15
Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 960 @ 60Hz VESA 1152 x 864 @ 75Hz MAC 1152 x 870 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz VESA 1440 x 900 @ 60Hz VESA 1440
Summary of the content on the page No. 16
Technical Information Panel 23.6” TFT (with LED backlight) Power Management On: 35 Watts (typical), 55 Watts (maximum) Standby Mode: < 1.0 Watt (USB 2.0) Off: < 1.0 Watt (USB 2.0) Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.2715 x 0.2715 mm Display Color 16.7M Tilt 15° to 70° Active Display Area 521.28 mm x 293.22 mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance FCC-B, CE, UL/cUL, TÜV/Bauart Power Input Vol
Summary of the content on the page No. 17
Wall-Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the Touch LED LCD Monitor before performing the procedure below. 1. Lay the Touch LED LCD Monitor face down on a soft surface. 2. Follow instructions included with the Wall Mount kit. NOTE 100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm 15
Summary of the content on the page No. 18
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply Touch LED LCD Monitor is firmly connected to the . Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are installed. Power on but no screen image Touch LED LCD Monitor Make sure the video cable supplied with the is tightly secured to the video output port on back of the computer.
Summary of the content on the page No. 19
Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com. Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting. To speak with Planar Customer Support please have your model and serial number available and dial: Planar S
Summary of the content on the page No. 20
2013 2001132385T 020-1211-00B
