Audiovox 50-0245x-014 SERIES user manual

Summary of the content on the page No. 1

FOR
50 - - 002 SERIES 1181285
50 - - 014 SERIES 1181286
FORD EXPLORER













3.
- 6'






-
Printed in the U.S.A
0026B INSTALLATION INSTRUCTION # 44
July 7, 1999
eries 640/650 Video Module 7. Audiovox S
6. 18 GA wire 4' 5. Awl or similar tool
4. Razor knife or similar 3

Summary of the content on the page No. 2

SCREW, # 8 X 3/4" 3 1 1 2 E 1 3

Summary of the content on the page No. 3

1. above headliner. Cut only where indicated. Make sure that the 8 1/2" cut is centered left to 2. secures O.E. bracket to roof brace. See Fig. 1. 3. Install console mounting bracket (item 2 pg 2) over O.E. bracket on roof brace. Secure rear of bracket using (2) two O.E. screws. Secure front 1 pg 2) See Figure 2. II. PREPARATION OF CONSOLE Caution:

Summary of the content on the page No. 4

- rd to the C - - pillar to the floor. Route the power lead to an accessory controlled source. Sensor extension, etc.) to the VCP location. See system to the chassis ground. c your area. See Figure 5. Caution: Do not overtighten screws. 12. Secure rear of console using (1) one #8 x 3/4" screw (item 1 pg 2). See Figure 5.