Summary of the content on the page No. 1
DNX7320
DDX7032
DDX7032M
GPS NAVIGATION SYSTEM
MONITOR WITH DVD RECEIVER
INSTALLATION MANUAL
© B54-4655-10/01 (MW)
Summary of the content on the page No. 2
Accessories 1 0 ..........1 ..........6 2 ! ..........1 ..........1 3 @ DNX7320 only ..........1 ..........1 4 # DNX7320 only ..........1 ..........1 5 DNX7320 only ..........1 6 ..........2 7 ..........1 8 ..........1 9 ..........6 | 2 DNX7320/DDX7032/DDX7032M
Summary of the content on the page No. 3
Installation Procedure 1. To prevent a short circuit, remove the key from the ¤ ignition and disconnect the - battery. • Mounting and wiring this product requires skills and 2. Make the proper input and output wire experience. For safety’s sake, leave the mounting and wiring connections for each unit. work to professionals. 3. Connect the speaker wires of the wiring harness. • Make sure to ground the unit to a negative 12V DC power 4. Connect the wiring harness wires in the following supply
Summary of the content on the page No. 4
Connection If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may Ignition key cause a short circuit, that in turn may start a fire. Always switch connect those wires to the power source running through the fuse box. ACC A Ignition wire (Red) B A Car fuse box Battery wire (Yellow) Car fuse box B (Main fuse) FM/AM Antenna Cord Ground wire (Black) - antenna input (To car chassis) C C Battery Connect to the vehicle's parking brake detectio
Summary of the content on the page No. 5
Rear view Cooling fan Accessory @ (GPS Antenna ) (DNX7320 only) (see page 8) FUSE (15A) Accessory 1 REVERSE REMO.CONT White/Black To front left speaker + White ILLUMI Gray/Black To front right speaker MUTE + Gray Green/Black To rear left speaker + Green ANT. CONT Purple/Black To rear right speaker + P CONT Purple EXT.CONT | English 5
Summary of the content on the page No. 6
System Connection USB terminal USB device (commercially available) ■ Video Input2 Resistance-free mini plug ■ Audio Input2 Resistance-free stereo type mini plug Do not connect. Accessory Accessory Accessory 4 2 3 ■ Audio/Video Output • Video output (Yellow) • Audio left output (White) • Audio right output (Red) ■ Audio/Video Input1 • Video input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Rear View Camera Input • Video input (Yellow) ■ Front Preout • Audio left outp
Summary of the content on the page No. 7
Optional Accessory Connection iPod (commercially available) KCA-iP300V (Optional Accessory) Audio Output (Black) Video Output (Yellow) Audio Input Video Input USB terminal USB terminal To KCA-BT200 (Optional Accessory) Navigation System Input (DDX7032 only) TV Tuner (Optional Accessory) Navigation System (Optional Accessory) Connection cable (Included in the TV tuner) Connection cable (Included in the Navigation System) | English 7
Summary of the content on the page No. 8
Installing the GPS Antenna Installing the Escutcheon (DNX7320 only) GPS antenna is installed inside of the car. It should For General Motors be installed as horizontally as possible to allow easy 1. Cut out accessory 7 to meet the shape of the reception of the GPS satellite signals. opening of the center console. To mount the GPS antenna inside your vehicle: 2. Attach accessory 7 to the unit. 1. Clean your dashboard or other surface. 2. Peel the backing off of the adhesive on the bottom Cut
Summary of the content on the page No. 9
For Toyota/Scion 1. Cut out accessory 7 as illustrated. Cutting line Accessory 7 2. Fold double-sided adhesive (accessory 8) along the slit and attach it to accessory 7 cut-out against the center rib as illustrated. Use 2 pieces of accessory 8 for 1 accessory 7 cut- out. 3. Attach accessory 7 cut-out to the unit. Accessory 8 | English 9
Summary of the content on the page No. 10
Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 9 (M5x
Summary of the content on the page No. 11
Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Remove the Hex-head screw with integral washer Lower the frame and pull it forward as shown in (M4 × 8) on the back panel. the figure. 3. Insert the two removal tools 6 deeply into the Acce
Summary of the content on the page No. 12
Install the Map data card (DNX7320 only) 1 Press [SRC] to turn the power on 2 Press [0] to close the panel 3 Press [0] for at least 1 second to fully open the panel 4 Insert the Map data card Accessory 5 5 Press [0] to close the panel | 12 DNX7320/DDX7032/DDX7032M
Summary of the content on the page No. 13
| English 13
Summary of the content on the page No. 14
1 0 2 ! 3 @ 4 # 5 6 7 8 9 | 14 DNX7320/DDX7032/DDX7032M
Summary of the content on the page No. 15
¤ - - 2 - | 15
Summary of the content on the page No. 16
A B A B - C C PRK SW | 16 DNX7320/DDX7032/DDX7032M
Summary of the content on the page No. 17
@ 1 REVERSE REMO.CONT + ILLUMI MUTE + + ANT. CONT + P CONT EXT.CONT | 17
Summary of the content on the page No. 18
2 3 4 | 18 DNX7320/DDX7032/DDX7032M RELAY 2 SUB REAR VIEW REAR FRONT AV IN1 AV OUT RELAY 1 WOOFER CAMERA
Summary of the content on the page No. 19
| 19
Summary of the content on the page No. 20
7 7 # # # @ # @ 7 # ! ¤ ! | 20 DNX7320/DDX7032/DDX7032M
