Summary of the content on the page No. 1
Instructions for use
HOOD
Contents
GB
GB
Installation, 10-11
English
Assembly
Technical information, 12
Electrical connection
Technical data
Description, 13
Filtering version
Ducting version
Operation, 14
Controls
HS 110
Maintenance,15
Cleaning the hood
Cleaning the grease filters
Replacing the charcoal filter
Replacing the lamps
Precautions and tips, 16
General safety
Air vent
Disposal
1
Summary of the content on the page No. 2
Installation Assembly GB Before proceeding with the assembly operations, 5) Once adjusted, finally fix the hood with a further remove the grease filters so that the hood is easier to 6 screws (D): Mark the 6 holes to be drilled on the handle (for the instructions see the paragraph wall, unhook the hood and drill the holes marked (8 “Cleaning the grease filters” in the chapter on mm diameter); then use the screw anchors and “Maintenance”). the screws provided for final fixing. FOR CORRECT FUNCTIO
Summary of the content on the page No. 3
GB d) Make the electrical connection of the hood by means of the power cable (refer to the paragraph “Electrical connection”). 3) Ducting version: e) Lower the lower flue resting it on the hood. f) Check if the charcoal filter (P) has been a) Connect the air vent of the hood to the air vent installed. If not yet installed, proceed by sliding hole using a flexible hose of 15 cm diameter. the 2 filter clips into their seats and turn the Lock the flexible hose with hose clamps (hose filter upwards.
Summary of the content on the page No. 4
Technical information Electrical connection GB ! Arrange the electrical power supply within the decorative flue dimensions. ! When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself. ! In case your appliance is not furnished with a non separating flexible cable and has no plug, or has not got any other device ensuring omnipolar disconnection from the electricity main, with a contact opening distance of at l
Summary of the content on the page No. 5
Description The hood may be in the filtering or ducting version. Ducting version GB Decide from the outset which type is to be installed. For better efficiency, we recommend installing the The hood aspirates air from the kitchen impregnated hood in the ducting version (if possible). with fumes and smells, passes it through the grease filters and then expels it to the outside through an exhaust duct. Filtering version For this version the charcoal filter does not need to be used. The hood aspirat
Summary of the content on the page No. 6
Operation Controls GB A B C D E A - Light button D - Third speed button Turns the lights on/off. Activates the motor at third speed B - Motor ON/OFF button E - Motor operation light Activates/deactivates the motor. The motor is activated at first speed. C - Second speed button Activates the motor at second speed 6
Summary of the content on the page No. 7
Maintenance ! Always switch off the electricity supply before Replacing the charcoal filter GB carrying out any cleaning or servicing operations on the appliance. If using the hood in the filtering version, the charcoal ! To avoid possible risks of fire always comply with filter (P) will periodically have to be replaced. the indicated instructions when cleaning grease First of all, remove the metal grease filters. Push filters and when removing grease deposits from the the catch towards the insi
Summary of the content on the page No. 8
Precautions and tips 04307931 General safety Disposal GB ! The distance between the supporting surface for The European Directive 2002/96/EC on Waste the cooking vessels on the hob and the lower part Electrical and Electronic Equipment (WEEE), requires of the hood must be at least 65 cm. that old household electrical appliances must If the instructions for installation for the hob specify not be disposed of in the normal unsorted municipal a greater distance, this has to be taken into account. w
